c.k T9540R User manual
LED Rechargeable hand torch 400 lumens
User Guide (V1.0)
T9540R
1
CHARGING:
FITTING THE BATTERIES: MAINTENANCE:
CAUTION:
1Plug the mains adapter into the charger unit and connect to an appropriate power source.
2
Insert the batteries into the charger unit ensuring that the polarity of the batteries and charger correspond.
3The mains adapter indicator light will light up RED during the charging process. The indicator light will
change to GREEN once the batteries have been fully charged.
4Charging time is approximately 8 hours.
1Unscrew the tail cap.
2
Insert the batteries into the torch, positive end first
(see image above).
3Replace the tail cap.
1Although the battery is supplied in a charged state,
a full charge prior to initial use is recommended.
2
Always recharge after use.
3It is advisable to charge the battery if not used
for 3 months.
1NEVER ATTEMPT TO DISASSEMBLE THE BATTERY,
CHARGER UNIT OR TORCH.
2
NEVER SHINE THE TORCH DIRECTLY IN
SOMEONE’S EYES.
HIGH PERFORMANCE 3.7V 2400MAH LITHIUM-ION
RECHARGEABLE 18650 BATTERIES ARE SUPPLIED WITH
THIS TORCH.
CORRECT USAGE AND MAINTENANCE IS ESSENTIAL TO ENSURE
MAXIMUM BATTERY LIFE AND PERFORMANCE.
CHARGER UNIT
MAINS ADAPTER
INDICATOR LIGHT
TAIL CAP
PRODUCT SPECIFICATIONS:
LIGHT SOURCE:
Cree XM-L T6 LED
LIGHT OUTPUT: High Beam (400 lumens), Dimmed (100 lumens), Flash (400 lumens)
BATTERY TYPE: 3.7V 2400mAh lithium-ion rechargeable 18650 battery
BATTERY CHARGING TIME: Approximately 8 hours
BATTERY LIFE: (3.5 hours), Dimmed (7 hours), Flash (3.5 hours)
CHARGING UNIT: Double dock 4.2V/1200mAh
TORCH SIZE: 235x55mm
IP LEVEL: IP64
INSTRUCTIONS FOR USE:
1Press the tail cap power button to turn the torch ON/OFF.
2
Apply a soft press to the tail cap power button to change between modes:
• Mode 1 Full beam
• Mode 2 Dimmed mode
• Mode 3 Flash
LED Rechargeable hand torch 400 lumens
User Guide (V1.0)
T9540R
TAIL CAP POWER BUTTON
Other c.k Flashlight manuals
