BZB Gear BG-UHD-VW24 User manual
BG-UHD-VW24
Ultra HD Video Wall Processor
User Manual
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Packing List 5
Specifications 6
Operation Controls and Functions 7
RS232/LAN Control Connection 8
RS232 Control Connection 8
Network Control Connection 8
PC Tool User Guide 9
Signal Setting Tab 10
FineTune: PQ Tab 11
CEC Control Tab 11
Video Wall Tab 12
Connection Diagram 15
Tech Support 16
Warranty 16
Mission Statement 16
Copyright 16
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
Introduction
The BG-UHD-VW24 is a HDMI 2.0 video wall controller with 2 HDMI inputs, 2 HDMI loop
outs, and 4 HDMI scaling outputs for video wall processing. The 5-pin phoenix connector
provides balanced L/R audio output. The BG-UHD-VW24 also features PC Tool or RS232
commands to control the product for different wall displays.
Features
●HDMI 2.0 and HDCP 2.2 compliant.
●Supports resolutions up to 3840x2160@60Hz video output for video wall.
●2 channels HDMI loop out.
●Bezel Compensation with two modes.
●180° display rotation.
●RS-232 and TCP/IP control
●CEC control of displays via PC Tool or commands
Packing List
●1 x Ultra HD Video Wall Processor
●1 x 12V/3A Power Adapter
●1 x 5-pin Phoenix Connector
●2 x 3-pin Phoenix Connector
●1 x RS232 to Phoenix Cable
●1 x CAT6 cable
●1 x USB to RS232 Cable
●1 x User Manual
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
Specifications
Technical
HDMI Compliance
HDMI 2.0
HDCP Compliance
HDCP 2.2/1.4
RS-232
Baud rate: 57600, data bit: 8, Stop bit: 1, no parity
Input Video Formats
4096x2160p 24/25/30/50/60Hz
3840x2160p 24/25/30/50/60Hz
1080p 24/25/30/50/60Hz
1080i 50/60Hz
1920x1200 60Hz
1680x1050 60Hz
1600x1200 60Hz
1440x900 60Hz
1400x1050 60Hz
1366x768 60Hz
1360x768 60Hz
1280x1024 60Hz
1280x960 60Hz
1280x800 60Hz
1024x768 60Hz
1280x720p50/60Hz
Audio Format
2.0 channel, 5.1 channel, LPCM, Dolby, AC3, DTS
ESD Protection
Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
218mm (W)×146mm (D)×43mm (H)
Weight
2Kg
Supply Voltage
+12V/3A
Power Consumption
25W (Max)
Operating Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 70°C / -4°F ~ 158°F
Relative Humidity
10%~50% RH (non-condensing)
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
Operation Controls and Functions
Front Panel
No.
Name
Function Description
1
Power LED
The power LED will illuminate when the unit is powered on
2
INPUT LED
The LED will illuminate when the corresponding HDMI input port is connected to
an active HDMI source device.
3
LOOP LED
The LED will illuminate when the corresponding LOOPOUT port is connected to
an HDMI display device.
4
OUTPUT LED
The LED will illuminate when the corresponding HDMI output port is connected to
an HDMI display device.
Rear Panel
No.
Name
Function Description
1
INPUTS
Connect HDMI source devices such as a DVD player or gaming console with an
HDMI cable.
2
LOOP OUT
HDMI loop out ports. Loop out the HDMI A/B signal for devices connected to
each output.
3
OUTPUTS
HDMI output for video walls.
4
12V/3A
DC 12V/3A power supply port.
5
GND
Ground the product housing.
6
AUDIO
OUTPUT
• Analog L/R audio output
3.5mm Stereo Jack. 20Hz ~ 20kHz, 1.5Vrms max
• BALANCED OUT: Balanced audio output port. 5-pin phoenix
connector, 20Hz ~ 20kHz, 1.5Vrms max.
7
SERVICE
Firmware update port.
8
CONTROL
• RS232: Loop out RS232-CTL control command
• RS232-CTL: External RS232 control, Baud Rate: 57600
Data Bits:8, Parity: None Stop Bits:1
• LAN: Network port for TCP/IP control. Connect to an active
Ethernet link with an RJ45 cable.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
RS232/LAN Control Connection
RS232 Control Connection
Connect to the RS232-CTL port of the product to a PC using a USB serial cable as shown
in the following figure:
Network Control Connection
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
PC Tool User Guide
The PC Tool control software supports both UART and network control. PC Tool consists
of five parts: Matrix Switch, Signal Setting, Fine Tune: PQ, Video Wall and CEC Control.
The UI is as follows:
Matrix Switch Tab
1. Select UART (with RS232 cable) or Network to connect to the device. Baud rate is
57600 bps.
2. Select an input source for each output.
3. “AllSet” function: Apply input HD A or B to all outputs.
4. Select the input source for B/MAIN output.
5. Select the audio source for balanced audio output and 3.5mm output.
6. Reset: Resets the device to factory settings.
7. EDID Control: Clicking the ‘EDID’ button will open the below EDID control window:
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9
BZBGEAR BG-UHD-VW24 PRODUCT MANUAL
A. Read the EDID information for devices connected to each output and save as a BIN file.
B. Open an existing EDID file and write to the HDMI A and B input port as Manual EDID.
C. Select the predefined EDID file and write to the HDMI A and B input
The available predefined EDID options:
4K60-2.0CH
1920x1200-2.0CH
4K60-5.1CH
1680x1050-2.0CH
4K30-2.0CH
1600x1200-2.0CH
4K30-5.1CH
1440x900-2.0CH
1080P-2.0CH
1400x1050-2.0CH
1080P-5.1CH
1360x768-2.0CH
720P-2.0CH
1280x1024-2.0CH
1024x768-2.0CH
Manual
Signal Setting Tab
The resolution of each input can be read to configure the resolution of each output.
Available output resolutions:
No.
Output Resolution Setting
No.
Output Resolution Setting
1
3840x2160p 60Hz
9
1440x1050 60Hz
2
3840x2160p 50Hz
10
1366x768 60Hz
3
3840x2160p 30Hz
11
1360x768 60Hz
4
3840x2160p 25Hz
12
1280x1024 60Hz
5
1920x1200 60Hz
13
1280x768 60Hz
6
1920x1080p 60Hz
14
1280x720p 60Hz
7
1920x1080p 50Hz
15
1280x720p 50Hz
8
1600x1200 60Hz
16
1024x768 60Hz
Note: 3840x2160 25/30Hz may only be used for standalone display and not for video walls.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10
Other manuals for BG-UHD-VW24
1
Table of contents
Other BZB Gear Computer Hardware manuals
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
