BZB Gear BG-UDAIC-E14 User manual
BG-UDAIC-E14
1X4 4K60 UHD 18Gbps HDMI Splitter & Distribution Amplifier
up to 230ft
User Manual
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Packing List 5
Specifications 6
Panel Description 7
Installation Procedures 9
Control Settings 10
FAQ 12
Tech Support 13
Warranty 14
Mission Statement 15
Copyright 16
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Introduction
The BG-UDAIC-E14is an extender splitter kit that distributes 1 HDMI input to 4 HDMI
outputs and extends these signals up to 230 feet (70m). The kit supports resolutions up to
4K@60Hz and the transmitter is also equipped with an HDMI loop out to view the content
near the source. The unit is also capable of bi-directional IR, advanced EDID, and RS232
control .
Features
●Zero latency transmission
●Split and extend 1 HDMI input signal to 4 HDMI outputs
●Up to 4K@60Hz resolutions
●Transmission distance up to 230 feet or 70 meters by using Cat6/6A/7 cables
●Bi-directional IR
●HDMI loop out
●Audio extraction from the TV or source device on the receiver end via S/PDIF.
●EDID passthru or manually set the EDID
●RS-232 command control
●Surge Protection, Lightning Protection, ESD Protection
●Equipped with rack mount ears
Packing List
1. 1x HDMI Splitter Extender TX
2. 4x HDMI Splitter Extender RX
3. 1x User Manual
4. 1x DC12V/2A
5. 4x DC5V/2A
6. 1x Terminal Block (RS-232)
7. 1x IR Blaster Extension Cable
8. 4x IR Receiver Extension Cable
9. 20x Mounting Brackets
10. 40x Screw
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Specifications
Item
Specification
Transport protocol
ipcolor
Split mode
1 IN 4 OUT
Transmission Distance
CAT6/6A/7<70m
HDMI signal
HDMI 2.0, HDCP2.2
Resolution
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz, 1280x960, 1280x800, 1280x768, 1680x1050, 1360x768, 1366x768, 1600x900,
1024x768,800x600, 3840x2160@24/25/30/50/60Hz, 4096x2160@24/25Hz
Audio formats
LPCM/DTS-HD/DTS-Audio/Dolby Digital 5.1
IR
Bi-directional IR passback (20-60khz)
RS-232
3-pin: TxD-RxD-GND, follows RS-232 levels
Working Temperature
-20~60°C
Storage Temperature
-30~70°C
Humidity (no
condensation)
0~90%
Protection
ESD protection
1a Contact discharge level 3
1b Air discharge level 3
Implementation of the standard: IEC 61000-4-2
Lightning protection
Surge protection
Power supply
TX: DC 12V/2A RX: DC 5V/2A
Power consumption
TX<13W RX<4W
Material
Aluminum alloy material + crystal panel
Color
Black
Weight
TX: 640g RX: 210g
Dimension
TX: 264.00(L) x 104.00(W) x 23.50(H)mm
RX: 106.0(L) x 99.0(W) x 26.2(H)mm
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Panel Description
Transmitter (TX)
No.
Name
Function Description
1
Power indicator
The blue light will illuminate when powered on
2
Reset button
Restarts the device
3
IR in
Connect to the IR receiver extension cable
4
IR out
Connect to the IR blaster extension cable
5
RJ45 output port
Connect using CAT 6/6a/7 network cables
6
HDMI output port
Connects to a local HDMI display device using an HDMI cable
7
HDMI input port
Connects to an HDMI source device using an HDMI cable
8
EDID DIP switch
Configure output resolution using the EDID DIP switch
9
RS-232 Port
Connects to an external device to control the transmitter
10
Power
Connects to the supplied DC 12V/2A power adapter
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Receiver (RX)
No.
Name
Function Description
1
Reset button
Restarts the device
2
Audio switch
Choose the audio source (output from the S/PDIF port)
S/PDIF: From the source device
ARC: From the TV (receiver end)
3
RJ45 signal input
Connect using CAT 6/6a/7 network cables
4
Power/Signal
indicator
When the device is powered on, the blue indicator light will be solid
if the HDMI signal is detected. If the HDMI signal is not detected,
the light will flash.
5
Power
Connects to the supplied DC 5V/2A power adapter
6
S/PDIF output
Connect to a speaker or amplifier
7
HDMI output
Connects to an HDMI display device
8
IR in
Connect using an IR receiver extension cable
9
IR out
Connect using an IR blaster extension cable
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Installation Procedures
Connection Diagram
Connection Instructions
1. Connect the source device to the transmitter's HDMI IN port using an HDMI cable.
2. Connect the transmitter's CAT6 OUT port to the receiver's CAT6 IN port using
network cables.
3. Connect the receiver's HDMI OUTPUT port to the display devices using HDMI
cables.
4. If using an HDMI loop out, connect the transmitter's LOOP OUT port to the display
using an HDMI cable.
5. If using the RS-232 control, connect the transmitter's RS-232 port to the external
control device.
6. Plug the power into the devices.
IR User Guide
1. The IR blaster extension cable connects to the IR OUT port of the transmitter or
receiver. The IR receiver extension cable connects to the IR IN port of the transmitter
or receivers.
2. The emitter of the IR blaster extension cable is recommended to be as close as
possible to the IR receiving window of the target device.
3. Point the remote control at the receiving head of the IR receiver extension cable to
operate.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9
BZBGEAR BG-UDAIC-E14 PRODUCT MANUAL
Control Settings
RS232 Settings
The default configuration is as follows:
Baud rate: 9600 / Data bits: 8 / Stop bits: 1 / Parity: 0
Control Commands
Function Descriptions
ES XX On/n
Turn on the network signal output port(s), choose from “01” to “04” (the network ports from
right to left are: 01, 02, 03, 04.);
“All” means all four ports
ES XX Off/n
Turn off the network signal output port(s), choose from “01” to “04” (the network ports from
right to left are: 01, 02, 03, 04.);
“All” means all four ports
Reset/n
Restart the device
Recover/n
Restore device to factory settings
Baud XX /n
Set the baud rate value: 9600 (default), 19200, 38400, 57600, 115200
Examples of control commands are shown below:
Control Command
ES 04 On/n
Function Description
Turn on network signal output port 04
Return Values
Received
successfully
ES 04 On OK
Receive failed
ES 04 On FAIL
Control Command
ES All Off/n
Function Description
Turn off all the network signal output ports
Return Values
Received
successfully
ES All Off OK
Receive failed
ES All Off FAIL
Control Command
Reset/n
Function Description
Restart the device
Return Values
Received
successfully
Reset OK
Receive failed
Reset FAIL
Control Command
Baud 19200/n
Function Description
Set the baud rate value: 9600
Return Values
Received
successfully
Baud 19200 OK
Receive failed
Baud 19200 FAIL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10
Table of contents
Other BZB Gear Amplifier manuals
BZB Gear
BZB Gear BG-DA-12GS1X4 User manual
BZB Gear
BZB Gear BG-DA-12GS1X2 User manual
BZB Gear
BZB Gear BG-HDA-E14 User manual
BZB Gear
BZB Gear BG-AMPC40 User manual
BZB Gear
BZB Gear BG-UDA-E14 User manual
BZB Gear
BZB Gear BG-AMPC40 User manual
BZB Gear
BZB Gear BG-DA-12GS1X8 User manual
BZB Gear
BZB Gear BG-UDA-E18 User manual
BZB Gear
BZB Gear BG-AMP2X50 User manual
BZB Gear
BZB Gear BG-DA-12GS1X4 User manual
