Bushnell ImageView 78-7348 User manual

Model: 78-7348

LIT. #: 98-0448/06-04

78-7348 1LIM.indd 1 6/17/04 9:48:17 AM

Congratulations on your purchase of a Bushnell ImageView spotting scope. Before using the product,

please read the instructions contained in this manual and take time to familiarize yourelf with the

different parts and features of the product.

CAMERA OPERATION INSTRUCTIONS

BUTTON DESCRIPTIONS

The MODE button has three functions:

1. Power on: Press and hold button until the camera turns on. When the camera is connected to your

PC via the USB cable provided, the camera will power on automatically.

2. Power off: While the camera is on, press and hold the button until camera turns off. If camera has

not been used or if a button has not been pressed for over 2 minutes, the camera will automatically

power off to save battery life. If the camera is connected via the USB cable, it will not power off

except when PC is turned off.

3. Mode change: Press this button rapidly to change modes.

The SNAP button has two functions:

1. Take a picture: Press this button to take a picture when the camera is on. (But not in the PC mode

or mode change.

2. Select: In “Mode Change”, press this button to confirm the function.

78-7348 1LIM.indd 2 6/17/04 9:48:17 AM

LCD DISPLAY

1. High Resolution Mode = 1280x1024 Pixels

2. Low Resolution Mode = 1024x768 Pixels

3. Select the timer to take a delayed picture. This gives you

approximately a 10-second delay.

This mode allows you to take short movie clips, saved as “.avi” files.

5. Selects different modes.

6. Deletes all the pictures in the memory.

7. Deletes the last picture taken.

8. USB mark appears when USB cord is connected between the camera and the PC.

9. Battery mark keeps track of the battery life left.

10. a. Picture Number-- This area will show the number of pictures in the memory.

b. SET-- select Hq (high quality)/Lq (low quality) mode, STO (Mass Storage)/ PCC (PC

Cam) mode, 50Hz/60Hz frequency

c. FUL--When the memory is full, the display will show “FUL” and alarm will sound.

OPERATION GUIDE

1. The camera is powered by two AAA batteries (included) or USB power (included).

2. Insert the battery into battery compartment.

3. Press and hold the MODE button until camera turns on.

4. Press SNAP to take a picture, or press the MODE button quickly to change mode settings as described

above. The camera is set at infinity and will not be focused on an object closer than 100 feet. 2

78-7348 1LIM.indd 3 6/17/04 9:48:18 AM

5. The mode setting operation is a cycle loop, so press the MODE button to switch to another mode.

The loop order of the different modes is shown here:

6. To change settings, toggle through the different modes by pressing the MODE button. When a

mode is selected, the indicator symbol on the LCD will appear. You can then select that mode by

pressing the SNAP button.

7. When in “Normal” mode, press SNAP to take a picture.

Press SNAP->

8. By pressing the MODE button the camera will enter “Mode Change”.

9. To select “Self-Timer” mode, press MODE and the self -timer mark appears, then press SNAP

and the camera will take a picture after a 10 second delay. The camera exits self-timer mode

automatically after capture is done and the self-timer mark disappears on the LCD at the same

time.

Press MODE-> press SNAP to capture.

78-7348 1LIM.indd 4 6/17/04 9:48:20 AM

10. Low Resolution mode, will cause your pictures to be of a lower resolution, but will allow you

to store many more pictures in the camera’s memory. The default setting is Hi. To change the

resolution, press the MODE button until you see the “mode” icon appears. Press the SNAP button,

and Lo will appear. The camera is changed from high resolution to low resolution. Repeat the same

steps to change the camera back to Hi resolution mode.

CAPTURED PICTURES WITH BUILT-IN MEMORY:

Pixels (Resolution) Image Quality Captured Picture Quantity

1280X1024(Hi) High quality (HQ) Up to 40 pictures

Low quality (LQ) Up to 55 pictures

1024X768(Lo) High quality (HQ) Up to 55 pictures

Low quality (LQ) Up to 85 pictures

11. When in “Normal” mode press the MODE button 3 times to enter the “AVI”

mode. The icon will appear. Press the SNAP button to start AVI capturing, and

counting. The resolution for AVI is 320X240 pixels. The memory of the camera can

hold from 40-70 seconds of live action. It depends on what objects you are capturing

and the lighting conditions. 4

78-7348 1LIM.indd 5 6/17/04 9:48:20 AM

12. To delete all pictures in the camera’s memory, select the “Delete All” mode. This

represented by the trash can icon. Press the SNAP button to confirm. The picture

number will then blink. You will hear a tone that becomes higher as the pictures are

deleted. Once complete, the picture number will reset to possible captured numbers.

13. If the “delete Last” icon appears, the display will show the following: Press SNAP

to delete the last picture in the camera’s memory. The picture number will be

automatically increased after deletion is done.

14. Press the MODE button until SET mode appears on the LCD. Press SNAP to enter

Setting mode. To change the setting of image quality (default setting is High), Storage/PC

Cam (default setting is Storage), 50 Hz/60 Hz frequency (default setting is 60 Hz).

a. Select the image quality at Hq (High quality) or Lq (Low quality) by pressing the

SNAP button. Then press the MODE button to confirm and enter next setting.

b. Select the STO (Mass Storage) or PCC (PC CAM) mode by pressing the SNAP button. Then

press MODE button to confirm and enter next setting.

78-7348 1LIM.indd 6 6/17/04 9:48:21 AM

c. Select 50 Hz or 60 Hz settings for the camera output by pressing the SNAP button. Then press

MODE button to confirm and enter next setting. The camera’s default mode is the “60” mode,

which matches the power frequency for the United States. To change to the “50” mode, press the

SNAP button until the “60” changes to “50”. Confirm the selection by pressing the SNAP

button. To avoid any flickering on the picture, the correct power frequency (either 50 or 60) for

your country must be selected.

d. Escape the Setting mode by pressing the SNAP button.

15. The battery mark keeps tracking the battery life. If the battery indicator

is blinking, it is necessary to replace the batteries soon.

REMOTE SHUTTER

The remote shutter is recommended for the best stability while taking images.

78-7348 1LIM.indd 7 6/17/04 9:48:22 AM

DOWNLOADING THE PICTURES TO YOUR COMPUTER

1. The camera can be detached for more convenient downloading.

2. The camera has a mass storage function. When connected to the PC without changing any setting,

a new disc icon will appear in the computer interface. Click the icon, the captured pictures will be

seen directly.

The captured pictures can also be downloaded and saved in the PC via the photo imaging software.

CONNECTING TO THE COMPUTER

System Requirements:

Pentium 166MMX minimum

(Recommended Pentium 266)

Windows 98 / Me / Windows 2000 / XP

Minimum 32MB of RAM

USB port

Minimum 200MB of Hard Drive space with additional 65 MB space for IE and DirectX

CD-ROM driver

Super VGA Monitor and video card

SOFTWARE INSTALLATION

For OS Windows Me/2000/XP, no need to install software, just plug in and use.

Load software prior to connecting your camera to your computer if your OS is Windows 98.

78-7348 1LIM.indd 8 6/17/04 9:48:22 AM

To load software insert CD into your CD-ROW drive and it will self-start. The CD contains the Roxio

Photo Suite software as well as the drivers that will allow your computer to recognize your camera.

Follow the “On Screen” instructions. If your computer does not have an auto play function and will not

automatically run CDs, open the CD in the “My Computer” window and click on the “autorun.exe”.

After driver are successfully installed, click on “Roxio Photo Suite ”to install the photo imaging

software.

WARNING: Make sure you download any picture from your camera before

you remove the batteries from the camera.

Follow the instructions on the software to successfully download and save the pictures on your computer.

An installation screen will automatically guide you through the installation process.

Specifications and designs are subject to change without notice.

78-7348 1LIM.indd 9 6/17/04 9:48:22 AM

WARRANTY / REPAIR

TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the

event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage

prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone

other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent

damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. SEND TO: IN CANADA SEND TO:

Bushnell Performance Optics Bushnell Performance Optics

Attn.: Repairs Attn.: Repairs

8500 Marshall Drive 25A East Pearce Street, Unit 1

Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe

you may also contact Bushnell at: BUSHNELL Performance Optics Gmbh

European Service Centre

MORSESTRASSE 4

D- 50769 KÖLN

GERMANY

Tél: +49 (0) 221 709 939 3

Fax: +49 (0) 221 709 939 8

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

78-7348 1LIM.indd 10 6/17/04 9:48:22 AM

Other manuals for ImageView 78-7348

Table of contents

Other Bushnell Telescope manuals

Bushnell

Bushnell 78-7360 User manual

Bushnell

Bushnell 181561 User manual

Bushnell

Bushnell 3" REFLECTOR User manual

Bushnell

Bushnell 26-2440 User manual

Bushnell

Bushnell Elite Tactical LMSS2 User manual

Bushnell

Bushnell NITRO SN154565G User manual

Bushnell

Bushnell Voyager 78-9470 User manual

Bushnell

Bushnell Videoscope 73-7000V User manual

Bushnell

Bushnell 78-6114 User manual

Bushnell

Bushnell 78-8830, 78-8845 User manual

Bushnell

Bushnell NORTHSTAR GOTO 78-8890 User manual

Bushnell

Bushnell FORGE User manual

Bushnell

Bushnell Discoverer 78-1600 Manual

Bushnell

Bushnell NORTH STAR GOTO 78-8840 User manual

Bushnell

Bushnell ImageView 111545 User manual

Bushnell

Bushnell Deep Space 78-9518 User manual

Bushnell

Bushnell Deep Space 78-9514 User manual

Bushnell

Bushnell NatureView 1181518 User manual

Bushnell

Bushnell NorthStar Goto- 78-8831 User manual

Bushnell

Bushnell Trophy Xtreme User manual

Bushnell

Bushnell SportView 78-2061 User manual

Bushnell

Bushnell Voyager 78-9960 User manual

Bushnell

Bushnell 78-9675 User manual

Bushnell

Bushnell 78-9332 User manual

Popular Telescope manuals by other brands

Meade

Meade 81005 Condor instruction manual

Celestron

Celestron NexStar 6 SE Quick setup guide

Meade

Meade 114 EQ-DS instruction manual

Celestron

Celestron C4.5 instruction manual

Meade

Meade LX200 CLASSIC instruction manual

Leica

Leica 82 HD Specifications

Celestron

Celestron CPC DELUXE 800 HD instruction manual

EASTCOLIGHT

EASTCOLIGHT 9920 instruction manual

zoomion

zoomion Genesis 200 EQ instructions

TEC

TEC APO 140 owner's manual

Orion

Orion 7832 manual

Carson

Carson Skelescope SK-100 instruction manual

SKY-WATCHER

SKY-WATCHER VIRTUOSO instruction manual

Celestron

Celestron Novice 50 user guide

Orion

Orion EZ Finder 7228 manual

cassini

cassini C-JRS operating instructions

nedis

nedis SCTE5060WT quick start guide

Meade

Meade Polaris 60EQ-D instruction manual