Bushnell ImageView 11-1027 User manual

Model #s: 111026 / 111027

LIT. #: 98-0828/02-07

Instruction

Manual

Model 11-1026

Model 11-1027

LANGUAGES

English .............4

Français......... 20

Español.......... 36

Deutsch......... 52

Italiano.......... 68

Português...... 84

WARNING

Make sure you download any pictures from your camera BEFORE removing

or changing batteries, unless you have been using an SD card rather than the

internal memory for photo storage. We recommend you download all current

photo files for safekeeping before storing the ImageView away if you are not

using an SD card in the camera, in case the batteries become depleted during

extended storage.

WARNING

Do NOT look directly at the sun through your binoculars.

Doing so may cause permanent eye damage.

NOTE: To reset the camera if you experience problems or if the display becomes

unresponsive, remove the batteries for at least one minute, then re-install them.

This may result in the loss of all photos/videos stored in the internal memory.

Congratulations on your purchase of the Bushnell ImageView®

binocular! The Bushnell ImageView binocular takes the technology

of digital photography and combines it with a high-quality compact

binocular. This allows you to observe sporting events, wildlife, scenic

vistas or anything you would normally use a binocular for, and then

save the image in a built-in attached digital camera. You can then

download these images to your computer and e-mail them to your

friends and family, print out the picture using the included software or

save them in a photo album for future use. Before using the product,

please read the instructions contained in this manual and take time

to familiarize yourself with the different parts and features of the

product.

English

Camera and Binocular Parts Guide

Snap

Button

Mode

Button

Camera

Lens

Binocular

Focus

Remote

Jack USB

Port

Card

Slot

Battery

Compartment

Tripod

Socket

(Slide Open In

Direction of Arrow)

CAMERA PARTS

1.e camera is powered by two AAA alkaline, lithium, or NiMh batteries (not included). Insert batteries

into the compartment, with the springs in contact with the negative (ﬂat) end of each battery. A power

meter on the left center of the display indicates battery condition.

2. Insert an SD card ("upside down" with metal contacts facing up) in the slot if greater storage is desired.

You may use SD cards (not MMC cards) up to 1 GB capacity. e camera has 8 MB of internal memory

which can hold over 100 photos, so a card is not necessary. However, the internal memory contents will be

lost if the batteries are removed or die-unlike photos stored on an SD memory card. A 256 MB standard

speed SD card is available in most consumer electronics or computer stores and a is good choice for your

ImageView.

3. Press and hold the MODE button until the camera turns on. e camera will turn oﬀ automatically after

about one minute if no buttons are pressed. Note: when the camera is connected to a computer via the supplied

USB cable, the camera will power on automatically, and draw power from the computer with no battery drain.

4. Hold the ImageView steady and press SNAP to take a picture (or start/stop shooting a video, when the

camera is in video mode). e camera focus is preset to take sharp photos from appoximately 35 feet to

inﬁnity.

5. When using a tripod, you can help avoid the eﬀects of camera shake by plugging the supplied remote

shutter release into the jack next to the SD card slot, and using the button on the remote rather than SNAP

to take photos.

Setup and Basic Operation

e ImageView will imprint the date and time in the bottom right corner of your photos. To

set the current date and time, after turning on the camera, press and hold both the MODE and

SNAP buttons at the same time, until the display begins to ﬂash. e display now shows the

last two digits of the year. Press the MODE button to move the cursor to the second digit if

necessary. Press the SNAP button to advance the digit to the current year ("07" for 2007, etc).

en press MODE to go to the next number, which is the month. Again, use SNAP to change

this to the current month. Following the month display is: date, hour (24hr format), minute,

and second-continue to set these following the same process using the MODE and then SNAP

buttons. When you have completed all of the date/time settings, the display will stop ﬂashing

and return to normal. Note that you will need to reset the date/time after replacing batteries.

Your ImageView is already set to high resolution and quality right out of the box, and it is

not necessary to use the MODE settings and make any changes to get good results by simply

pressing the SNAP button to take photos. However, as you might want to shoot a video clip,

delete one or more previous photos, or explore other options, we recommend you review the

available mode options listed on the following pages. Brieﬂy pressing the MODE button will

step through these operational modes in the listed order, and you will see the icon for each

mode along with its current setting on the display. Use the SNAP button to select the desired

setting for any mode. If you make no changes, and the SNAP or MODE button is not pressed

within 5 seconds, the camera will return to normal operation and display.

Using the Operational Modes/Setting Date & Time

Mode Icon Settings Description

Video Video

Camera

OFF, High

(640x480 pixels

per frame, 15 fps),

Low (320x240

pixels)

Select "Hi" (recommended) or "Lo" video resolution

instead of "OFF" to put the camera in video mode.

Wait a few seconds for the camera to automatically

return to the normal display, then begin shooting by

pressing SNAP. e counter will show elapsed time-

up to the 53 (Hi) or 132 (Lo) second maximum for

each video clip. Press SNAP again to stop shooting.

e counter will advance by one, indicating the

video ﬁle has been saved. Return to the video mode

setting and select OFF to reset the camera to still

photo mode.

Quality Hq or Lq High, Low Select "Hi" (recommended) or "Lo" quality to

choose the amount of ﬁle compression, which aﬀects

the size of the photo ﬁle. "Lo" allows more photos

to be stored in memory, but at reduced quality.

Resolution Hi or Lo High (640x480

pixels), Low

(320x240 pixels)

Select "Hi" (recommended) or "Lo" resolution,

based on your preference for better looking photos

(Hi) or being able to take a greater number of

photos (Lo).

Using the Operational Modes (Bold indicates default settings)

Mode Icon Settings Description

Line Frequency 60 or 50 60 Hz, 50 Hz Set to match the AC power frequency (cycles) of

your country. is ensures that stills and videos shot

under ﬂuorescent lighting appear normal.

Continuous CT OFF, 3, 5 Select 3 or 5 frames to shoot a rapid series of photos

instead of a single frame when SNAP is pressed

(in normal still photo mode). To cancel, enter this

mode again and select OFF.

Memory Access MEM Sto (USB Mass

Storage), PC (USB

Camera)

Select "Sto" to access the internal or card memory

when the camera is connected to a computer with

the USB cable. "PC" allows the camera to be

used as a live USB/PC camera (note that the 8x

magniﬁcation and lack of close focus capability

limits usefulness in most size rooms)

Delete Last LSt+Trash

Can

None-press SNAP

to delete the last

photo or video

Select this mode and press SNAP to delete only the

last photo or video you took. e counter will go

down one number.

Using the Operational Modes

This manual suits for next models

Table of contents

Languages:

Other Bushnell Binoculars manuals

Bushnell

Bushnell SyncFocus 118326 User manual

Bushnell

Bushnell Cabelas 20-3125 User manual

Bushnell

Bushnell Marine 13-7507 User manual

Bushnell

Bushnell Night Vision 26-2640 User manual

Bushnell

Bushnell H2O 157050R User manual

Bushnell

Bushnell Yardage Pro 20-1925 User manual

Bushnell

Bushnell 137501 User manual

Bushnell

Bushnell ImageView 11-8338 User manual

Bushnell

Bushnell trophy XLT User manual

Bushnell

Bushnell 161001CM User manual

Bushnell

Bushnell ImageView 18-0832 User manual

Bushnell

Bushnell Yardage Pro 20-2025 User manual

Bushnell

Bushnell Marine 13-7500 User manual

Bushnell

Bushnell Night Vision 26-1554 User manual

Bushnell

Bushnell 91-0203/01-08 User manual

Bushnell

Bushnell PowerView 14-1042 User manual

Bushnell

Bushnell MATCH PRO BMP1556G User manual

Bushnell

Bushnell Binocular User manual

Bushnell

Bushnell ENGAGE X User manual

Bushnell

Bushnell MARINE Binoculars User manual

Bushnell

Bushnell ImageView 118330 User manual

Bushnell

Bushnell PRIME BP1025B User manual

Bushnell

Bushnell Legend 98-1389/03-09 User manual

Bushnell

Bushnell ImageView 11-8313 User manual

Popular Binoculars manuals by other brands

Celestron

Celestron VistaPix 72218 user guide

Levenhuk

Levenhuk Atom Digital DNM200 user manual

ATN

ATN PS-15 Operator's manual

Bresser

Bresser TOPAS 7x50 instruction manual

Berger & Schroter

Berger & Schroter LN-G3-B50 user manual

Leica

Leica geovid 8x42 HD-R user manual

Noblex

Noblex NF 8 x 42 inception user manual

Newcon Optik

Newcon Optik AN Series Operation manual

PHOTONIS

PHOTONIS VYPER quick start guide

ATN

ATN 6015-WPT specification

Famous Trails

Famous Trails ViewCatcher DCB 822 user guide

AGM

AGM EXPLORATOR FSB50-640 user manual

Opticron

Opticron Marine-3 7x50 BIF.GA User instructions and warranty

Kayoba

Kayoba 009129 operating instructions

Vixen

Vixen ARENA Series instruction manual

MAGINON

MAGINON NVB 60 user manual

Leica

Leica Geovid 56 Specifications

Leica

Leica GEOVID PRO quick start guide