Bush DLED48287FHD User manual
3
2Connect the antenna to your TV
Connect the TV to the mains socket
...and switch on
insert plug...
UK plug
4To switch the TV on
Insert the batteries into the Remote Control
1
Lift the cover on the back of the remote gently. Insert two
AAA batteries. Make sure the (+) and (-) signs match
(observe correct polarity). Place the cover back on.
1. Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up.
To switch on the TV from standby mode either:
2. Press the “ ” button, P/CH+ / P/CH- or a numeric button
on the remote control or;
3. Press the control switch located on the left side of the
TV.
By either method the TV will switch on.
REAR OF THE TV
Quick Start Guide DLED48287FHD
Helpline No: 0345 6040105
Start Auto Setup procedure
Important note: Ensure that the aerial is connected and a Common Interface
module is not inserted before switching on the TV for the first time installation.
Do not insert a common interface module during the search process.
1. When the TV is turned on for the first time the language screen will
be displayed. Select the desired language using Up or Down
button and press OK to save and continue.
2. After setting the language, First Time Installation screen wil be
displayed. Use Up/Down and Left/Right buttons to set the
desired options.
HDMI input
PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE
CONNECTING. Use a HDMI to HDMI cable to connect the two units together.
To select the HDMI input, press the “SOURCE” button on the remote control.
Each time it is pressed the on-screen menu confirms your selection.
6
5
3. “Do you want to start automatic search?" message will be
displayed on the screen. Select YES and press OK to continue.
The TV will search for digital terrestrial broadcasts. After all the
available stations are stored, Channel List will be displayed on the
screen. If you like to sort channels, according to the LCN(*), please
select “Yes” and then press OK. (*) LCN is the Logical Channel
Number system that organizes available broadcasts in
accordance with a recognizable channel sequence.
50345148
SOURCESOURCE
To HDMI connection on
the device
Table of contents
Other Bush LED TV manuals
Bush
Bush LED32127HDCNTD Manual
Bush
Bush LE-20GTG01 Manual
Bush
Bush LED40287FHDCNTD User manual
Bush
Bush LED20265T2S User manual
Bush
Bush CTV401 User manual
Bush
Bush DLED65UHDSFIRE User manual
Bush
Bush DLED43UHDHDRS User manual
Bush
Bush LED32127HDT Manual
Bush
Bush 50 User manual
Bush
Bush DLED40287FHD User manual
Bush
Bush DLED65UHDHDRSB User manual
Bush
Bush 40/135O-WB-11B4-FEGP-UK User manual
Bush
Bush DLED43FHDSB User manual
Bush
Bush ELED32240FHDCNTD3D Manual
Bush
Bush 32-191F3DB User manual
Bush
Bush LE-55GB2A Manual
Bush
Bush DLED55UHDHDRSA User manual
Bush
Bush LED24127FHD Manual
Bush
Bush LED19134HD Manual
Bush
Bush DLED55UHDHDRSB User manual
