Burg m.options sPinLock 200 User manual
sPinLock 200
www.burg.de
Operating manualGB
sPinLock 200
sPinLock 200 |March 2018 01- AN/DSW English ǀ 2
sPinLock 200
C
B
F
A
B
C
D
Indicator
Close position
Open position
Guide-Line
Contents
Default settings ...................................................... 2
Technical specifications ........................................... 2
Configuration ...................................................... 2-3
Finding the code by masterkey................................. 3
Installation ............................................................ 3
configuration
Default Settings
Out of the packaging, the resettable combination lock can
be opened using the number combination 0-0-0-0, even
though the number dials may be in other positions.
Number combination 0-0-0-0
E
F
Number dials
Rotary knob
1. Putting the lock in the disengaged state
The lock has to be in the disengaged state. To do so, the
dials must be turned to the current code (default setting 0-
0-0-0). Then turn the knob 90° clockwise until the open
position is reached.
D
E
A
Technical specifications
Dimensions Ø 5,96 cm x 5,22 cm
Material Casing: plastic
Color black
Mounting hole 16 mm x 19 mm
Number of dials 4
Number of possible codes 9.999
Default settings 0-0-0-0
Locking direction L, R, LAD
Lock attachement M19 Nut
Latch Zinc (nickel-plated)
2. Setting the number combination
The desired number combination can be set by turning the
number dials while the lock is in the disengaged state.
sPinLock 200 |March 2018 01- AN/DSW English ǀ 3
Important: A new code can be set any time the lock is in
the disengaged state. Only the code used to engage the lock
can be used to disengage it again. This makes the lock sui-
table for use by several persons.
Turning the knob 90° counterclockwise to the close
position will end the configuration process. Turning the
number dials while the knob is in the close position will
engage the lock.
Finding the code by masterkey
1. Inserting the master key
Insert the master key an turn it 90° clockwise to align it
with the open position.
2. Turning the number dials
Turn the number dials carefully until they stop. It is
important to turn the dials bottom-up one by one, starting
from the leftmost dial and working your way toward the
right.
3. Removing the masterkey
Turn the masterkey 90° counterclockwise and pull it out. In
this state, you will be able to read out the current code and
open the lock.
Installation
Mounting hole: 16 x 19 mm
BURG F.W. Lüling KG
Hegestraße 6
58300 Wetter (Germany)
Fon + 49 (0) 2335 / 63 08-0
Fax + 49 (0) 2335 / 63 08-999
www.burg.de
Other Burg Lock manuals
Burg
Burg Combipad User manual
Burg
Burg sPinLock 410 User manual
Burg
Burg Coreo Pro User manual
Burg
Burg Combipad User manual
Burg
Burg sPinLock 420 User manual
Burg
Burg B-Smart-Lock MASTER Instruction Manual
Burg
Burg B-Smart-Lock Combipad User manual
Burg
Burg Intro.RFID User manual
Burg
Burg sPinLock 410 User manual
Burg
Burg Master User manual
Burg
Burg LEVER 575 User manual
Burg
Burg Intro.Code User manual
Burg
Burg Intro.Code User manual
Burg
Burg Master Pro User manual
Burg
Burg TwinPad User manual
Burg
Burg Intro.Code User manual
Burg
Burg KeyPad Outdoor IP54 User manual
Burg
Burg sPinLock 510 User manual
Burg
Burg Master Pro User manual
Burg
Burg Flexo.Code User manual
