BT Decor 2100 User manual
If you experience any problems, please visit
www.bt.com/producthelp
BT Decor 2100
User Guide
If you experience any problems, please visit
www.bt.com/producthelp
1
Mute
Welcome ….
to your BT Decor 2100
Corded Telephone
• 3 one-touch memory buttons – for easy dialling
of your 3 most important numbers
• 10 number quickdial memory – so you can store
a further 10 useful telephone numbers
• Mute – mutes your voice so you can talk to
someone else in the room without your caller
hearing you
• Last number redial – easy, one touch dialling of
the last number called
• Ringer volume and tone control options
This User Guide provides you with all
the information you need to get the most
from your phone.
Before you make your first call you will need to
set up your phone. Follow the simple instructions
in ‘Getting started’, on the next few pages.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
2
Getting started
Location
You need to place your BT Decor 2100 within
3 metres of a telephone socket so that the cable
will reach.
Setting up
1 Plug the telephone line cord into the telephone
wall socket.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
3
Getting to know your phone
Mute
Quickdial
memory card
Use to make a note
of your quickdial
memory numbers.
Quick dial
Use to store one-touch
and quickdial telephone
numbers in the memory
and to dial quickdial
memory numbers.
Mute
(with LED indicator)
During a call, mutes
your voice so your caller
cannot hear you.
The red LED illuminates
when the mute function is
on and flashes when storing
a number in the one-touch
or quickdial memory.
If you experience any problems, please visit
www.bt.com/producthelp
4
Getting to know your phone
Mute
Ringer tone
switch (located
on back of base)
Use to set the ringer
tone: R1, R2 or R3.
Incoming call
LED indicator
Red LED flashes to
indicate an incoming call.
One-touch
memory card
Use to make a note
of your 3 one-touch
memory numbers.
Redial
Press to redial the last
number called.
R (Recall)
Used with switchboard
services and certain BT
Calling Features.
Ringer volume switch
Use to select the ringer
volume: High, Low or Off.
One-touch memory buttons
Use to store and dial your one-
touch memory numbers.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
5
Using the phone
Make a call
1. Lift the handset and wait for the dial tone.
2. Enter the telephone number.
End a call
1. Replace the handset on the base.
Receive a call
1. When you receive a call, the telephone rings
and the red incoming call LED will flash. Simply
pick up the handset to answer the call.
Last number redial
1. Lift the handset and press the button.
The last number called will be redialled.
Note: a redial number can only be 32 digits
long. If the last number redialled was longer
than 32 digits only the first 32 digits will be
dialled out.
Mute
1. During a call, press and release the Mute
button to mute the handset microphone. The
red LED on the mute button will illuminate to
indicate that the mute feature is on. Your caller
now cannot hear you speak.
2. To switch mute off, press and release the Mute
button again. The red LED will turn off and your
caller will now be able to hear you.
If you experience any problems, please visit
www.bt.com/producthelp
6
Adjust the ringer volume
There are 3 volume levels to choose from:
High, Low or Off. The default setting is High.
1. Adjust the switch on the base to the volume
you want.
Adjust the ringer tone
There are 3 tones to choose from: R1, R2 or R3.
The default setting is R1.
1. Adjust the switch on the back of the base to the
ringer tone you want.
One-touch memory
You can store 3 of your most important telephone
numbers under the one-touch memory buttons
, and . There is a memory
card located above the one-touch memory buttons
so you can make a note of the number or contact
associated with the number you have stored. You’ll
need to lift the plastic plate up so you can write on
the card.
Note: one-touch memory telephone numbers
can be a maximum of 32 digits. If you enter
more than 32 digits you will hear an error tone.
Store a one-touch number
1. Lift the handset.
2. Press and hold the button for 2 seconds
until you hear a confirmation tone, then release.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
7
3. Press a button to assign a number, either:
M1 , M2 or M3 or
to . A confirmation tone will be heard.
4. Dial the number you want to store.
5. Press and release the button. You will
hear a confirmation tone.
6. Replace the handset on the base.
Note: if you wish to cancel storing a number,
replace the handset on the base. The storing
process will be cancelled and any number that
was previously stored will be retained.
Dial a one-touch number
1. Lift the handset and wait for the dial tone.
2. Press the one-touch button ,
or under which the number you want
is stored. The number will be dialled
out automatically.
Delete a one-touch number
1. Lift the handset.
2. Press and hold the button until you hear
a confirmation tone, then release. The red LED
on the mute button will flash.
3. Press the one-touch button that you want
to delete.
4. Press the button. You will hear a
confirmation tone. Replace the handset on
the base.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
8
Quickdial memory
You can store 10 of your most frequently dialled
telephone numbers under the quickdial memory
buttons to . There is a quickdial memory
card located on the base of the telephone so you
can make a note of the number or the contact
associated with the number you have stored.
You’ll need to lift the plastic plate up so you can
write on the card.
Note: quickdial memory telephone
numbers can be a maximum of 32 digits.
If you enter more than 32 digits you will
hear an error tone.
Store a number in the quickdial memory
1. Lift the handset.
2. Press and hold the button until you hear
a confirmation tone, then release. The red LED
on the mute button will flash.
3. Press the quickdial memory location button
to under which you want to store the
telephone number.
4. Enter the telephone number you want to store
including the area code. (If you want to insert
a pause in the number, see ‘To insert a pause’
on page 14).
5. Press the button. You will hear a
confirmation tone. Replace the handset on
the base.
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
Note: if you wish to cancel storing a number,
replace the handset on the base. The storing
process will be cancelled and any number that
was previously stored will be retained.
Dial a quickdial memory number
1. Lift the handset and wait for the dial tone.
2. Press the button.
3. Press the quickdial memory location button
to under which the number you
want is stored. The number will be dialled
out automatically.
Delete a number stored in the
quickdial memory
1. Lift the handset.
2. Press and hold the button until you hear
a confirmation tone, then release. The red LED
on the mute button will flash.
3. Press the quickdial memory location button
to that you want to delete.
4. Press the button. You will hear a
confirmation tone. Replace the handset on
the base.
9
If you experience any problems, please visit
www.bt.com/producthelp
If you experience any problems, please visit
www.bt.com/producthelp
General information
Safety
- Only use the telephone line cord supplied
otherwise your telephone may not work.
- Do not open the handset or base of the
telephone. This could expose you to high
voltages or other risks.
- Do not stand your product on carpets or other
surfaces that generate fibres, or place it in
locations preventing the free flow of air over
its surfaces.
- Do not expose to direct sunlight.
- Do not submerge any part of your product in
water and do not use it in damp conditions,
such as bathrooms.
- Do not expose your product to fire, explosive or
other hazardous conditions.
Cleaning
Clean the telephone with a damp (not wet) cloth,
or an anti-static wipe. Never use household polish
as this will damage the product. Never use a dry
cloth as this may cause a static shock.
10
Table of contents
Other BT Telephone manuals
