BT BT3110 Specification sheet

BT3110

with nuisance call blocking

and answer machine

Quick Set-up and User Guide

Digital Cordless Phone with Answer Machine

You’ll need a Caller Display service from your network provider to use

Call Blocking and other Caller Display enabled features, including accessing

your Calls list. Charges may apply.

Important – please read rst

• Only use the line cord, power

supply and rechargeable batteries

that come with your phone.

• Make sure the power supply is

connected to a socket that you

know works.

• Connect your phone to the power

supply and let the batteries charge

for 16 hours before connecting your

phone to the phone socket.

• The base should always be plugged

in to the mains power supply.

If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110

Check the box contents

Handset

If you bought more than one

handset you’ll also get:

• Extra handset

• Charger with mains power

adaptor (item code 094096)

• Two rechargeable batteries,

AAA NiMH 300mAh

Important

Only use the mains power adaptors.

Cables and rechargeable batteries

supplied in this box or this product

might not work. Any replacement

rechargeable batteries must be of

the same type. BT accepts no

responsibility for damage caused to

your BT3110 if you use any other

type of batteries.

Base

Phone line (this comes

already installed)

Mains power adaptor

(item code 094096)

Two rechargeable

batteries, AAA NiMH

300mAh

Quick set-up guide

Where to put your phone

• Place the base within

2 metres of a mains power

socket and 1.8 metres of a

phone socket so the cables

will reach.

• Make sure it’s at least a

metre away from other

electrical appliances to avoid

interference.

• Don’t place the phone or

base in a bathroom or other

humid area.

• The product works by

sending radio signals between

the handset and base. The

strength of the signal depends

on where you position the

base. Putting it as high as

possible can help give you

the best signal.

1. Plug in

1. Plug the mains power adaptor

into the base, with the cable clipped

in the groove provided.

2. Plug the other end of the power

adaptor into the wall power socket

and switch on.

The phone line cord is pre-installed

but don’t plug the other end into

the wall socket yet.

Important

• Don’t connect the phone line to

a phone socket until the handset is

fully charged.

• The base station should be

plugged into the mains power socket

all the time.

Quick set-up guide

If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110

1.Slideothebatterycoverfrom

the back of the handset and insert

the two batteries supplied. Note the

‘+’ and ‘-’ markings inside the

battery compartment. Then slide

the battery cover back into place.

2. The handset will check for a link

with the base station. Once found,

you’ll need to set the time and date,

but you can then press the [back]

button to skip any further options

until setup is complete (you can

always set these up later).

3. Place the handset on the base

and leave to charge for 16 hours.

Important

Charge the handset batteries for

16 hours or your phone might

not work.

Talk/Standby time

Under ideal conditions, the

handset batteries should give

up to 10 hours talk time or

100 hours standby on a single

charge. (This doesn’t mean you

can unplug the base or leave

the handset for this length of

time without charge).

Please note that new Ni-MH

rechargeable batteries don’t

reach full capacity until

they’ve been in normal use

for several days.

Battery low warning

You will hear a warning beep

every 2 minutes during a call

and the iconwillash.

You must recharge the

handset batteries before you

can use the handset. If the

charge completely runs out

thehandsetwillswitcho.

Place the handset on the

base or charger to charge.

2. Charge

Quick set-up guide

4. After 16 hours, plug the phone

line cord into the phone wall socket.

Battery performance

• To keep the batteries in

the best condition, leave the

handsetothebasefora

few hours at a time.

• Running the batteries right

down at least once a week

will help them last as long

as possible.

• After charging your handset

forthersttime,subsequent

charging time for the batteries

is approximately 8 hours.

• The charge capacity of

rechargeable batteries will go

down over time, which will

reduce the talk and standby

time. Eventually they’ll need

replacing. For details on how

to get replacement batteries,

call Discom on 0800

9808 999*.

Quick set-up guide

If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110

Set up for additional handsets

(multipacks only)

1. For additional handsets and

chargers: plug the mains power

adaptor into the mains wall socket

and switch on the power.

2. Insert the batteries as explained

on page 5. If you set the time and

dateonthersthandsetthenitwill

be shared with all other handsets

in your multi pack once you insert

the batteries.

3. Place the handset on the charger

to charge for 16 hours.

Using your BT3110 on a line

with broadband?

To avoid problems with your

broadband or noise on your

phone line, you might need to

plug your telephone line cord

into the wall socket via a

microlter(notsupplied).

If your main phone socket has

a single socket, you do need

tousemicrolters,likethis:

You’llneedamicrolterfor

every phone socket where

you’vegotequipment

plugged in – up to a

maximum of four per line –

including alarm sytems and

digital TV boxes.

You can get BT ADSL micro

ltersfrombt.com/shop

You don’t need to use

microltersifyourmain

phone socket has two

separate sockets, like these:

Tip

If you need to take the batteries out,

slide the battery cover down, then

gently take the batteries out.

Quick set-up guide

Your BT3110 is now ready for

you to use

• For instructions on making a call,

go to page 17.

• For help personalising your phone’s

settings, go to page 33.

• For instructions on using the

answer machine, go to page 28.

• For instructions on Call Blocking,

go to page 21.

Or,youmayndtheanswerin

the Help section on page 41 or see

ouronlinefrequentlyasked

questionsatbt.com/bt3110

If you need to call the Helpline,

please read the Help section on

pages41-43rst.Itcontains

troubleshooting tips for common

problemsandfrequentlyasked

questions.Ifyoustillneedsome

help, call the Helpline on

0800 145 6789*.

3. Go!

Tip

If you call the Helpline for advice, it’s

a good idea to call using another

phone so you can follow any

instructions using your BT3110.

* Calls made from within the UK mainland

network and mobile networks are free.

International call costs may vary.

If you need some help, call us on 0800 145 6789 or go to bt.com/bt3110

Contents

4 Quick set-up guide

12 Getting to know your phone

- Handset buttons

14 Handset display

15 Finding your way around

your phone

16 Base buttons

17 Using the phone

17 Switching the handset on

ando

- Making an external call

- Preparatory dialling

- Ending a call

- Call timer

- Receiving a call

18 Mute

- Incoming speech /

Handsfree volume

- Handsfree

- Answer a call using handsfree

- Switching to handsfree during

a call

- Redial

- Redialling the last number

- Viewing and dialling a number

in the redial list

19 Saving a redial number to the

phonebook

- Deleting a number from the

redial list

- Deleting the entire redial list

- Do Not Disturb

 -TurningDoNotDisturbo

20 Turning the handset ringer up,

downoro

- Finding your handset (paging)

21 Call block

- Blocking calls by type

- Blocking a number

22 Viewing the Blocked list

- Editing a number in the

blocked list

- Deleting a number from the

blocked list

- Deleting all of your blocked

numbers

23 Phonebook

-Store a phonebook entry

-Storequickdialnumbersin

buttons 1 and 2

24Dialaquickdialmemorynumber

-Viewing/dialling a phonebook

entry

Contents

-Searching alphabetically for

a phonebook entry

25 Editing a phonebook entry

-Adding a pause to a saved

number

-Deleting a phonebook entry

-Deleting the entire phonebook

26 Caller display and the calls list

-The calls list

-Viewing or dialling an entry in

the calls list

27 Saving a calls list entry to

your phonebook

- Deleting an entry in the calls list

- Deleting all of the calls list

- Adding a calls list number to the

blocked list

28 Answer machine

- Switch the answer machine on

oroandsettheanswermode

- Outgoing messages

- Answer & Record

- Answer only

- Recording your own outgoing

message

29 Playing the current outgoing

message

- Recording a memo

- Setting the answer mode

30 Setting the answer delay

- Playing messages using the

handset

25 Message playback

- Deleting all old played messages

- Using the answer machine

from the base

- Switching the answer machine

onoroatthebase

- Playing messages using the base

- Message playback on the base

- Deleting all played messages

32 Remote access

- Setting or changing the remote

access PIN

 -Turningremoteaccessonoro

- Operating your answering

machine remotely

Other manuals for BT3110

Table of contents

Popular Cordless Telephone manuals by other brands

3Com

3Com NBX Guide

Panasonic

Panasonic KX-TGK210HK operating instructions

Panasonic

Panasonic KX-TCA181EX installation manual

AT&T

AT&T CL84102 user manual

BREZZICNI

BREZZICNI CL-3622 user manual

Panasonic

Panasonic KX-TG1831NZ operating instructions

Panasonic

Panasonic KX-TG7301E operating instructions

Furuno

Furuno FM-4721 Brochure & specs

Sanyo

Sanyo CLT-J70 instruction manual

Amplicomms

Amplicomms BigTel 201 user manual

GE 26992 user guide

AT&T

AT&T E1812B user manual

Sanyo

Sanyo CLT-670 instruction manual

GE 15432970 user guide

Curtis

Curtis TC595 owner's manual

Gigaset

Gigaset Gigaset 3000 Micro operating instructions

Poly

Poly VVX D230 Quick start user guide

AT&T

AT&T 7625 user manual