Bryton Cardio 35 User manual
START/PAUSE/
STOP/UP
LAP/MODE/DOWN
POWER/BACK/
BACKLIGHT ON
OK/SETTING/PAGE
Cardio 35
User’s Guide
bb.brytonsport.com
EN
1
2
3
4
2
EN
Contents
Introduction ................................ 3
Getting Started........................... 4
Buttons.......................................... 6
Clock View.................................... 7
Clock Settings.................................8
Exercise/Training ....................... 10
Start / Pause / Stop Exercising..10
Mark Lap...........................................11
View Exercise/Training Info .......12
Training Settings........................ 13
Set Training .....................................13
Set LAP training.............................17
Link Sensors....................................18
View Exercise/Training
Record...............................................21
Using Stopwatch...........................21
Stride Length..................................22
Auto Scrolling.................................23
Clear Storage ..................................23
Icons............................................... 24
Specications.............................. 25
Screen Terminologies............... 26
EN
3
Introduction
Cardio 35 GPS sports watch is for casual activities and professional
training. Cardio 35 can accurately calculate and record your
location, speed, distance, pace, stride rate, calories, cadence*, heart
rate* and more. Your training results can be shared and analyzed
at brytonsport.com. With the built-in sensor, no extra foot pod
is needed for indoor exercise. Cardio 35 is for both running and
cycling activities.
Package Contents
Make sure the following items are in the box:
Cardio 35•
USB cable•
User’s Guide•
Optional accessories:
Heart rate monitor•
Speed / Cadence sensor•
* HRM or SPD/CAD sensor is required.
4
EN
Getting Started
Step 1. Connect, Sync, and Charge
1. Connect Cardio 35 to a PC using the supplied USB cable.
2. Download the Bryton Bridge 2 application at bb.brytonsport.com
and sync with Cardio 35.
Step 2. Turn On
Press button 1to turn on Cardio 35.
Note: To turn o, long press button 1for 5 seconds.
Step 3. Initial Setup
For rst time use, do the following:
1. Select your preferred language.
2. Select the unit of measurement.
3. Enter your user prole (recommended).
Note: Data accuracy will highly aect your training analysis.
4. Select you preferred date format.
Keep Cardio 35 connected to
the PC to charge the battery.
Note: For rst time use, charge the
battery for at least 2.5 hours.
EN
5
Step 4. Start a training or exercise
Cardio 35 operates in three major modes:
Clock View Exercise
3
5. Enter your max heart rate.
6. Go outdoors to acquire GPS signal. Once the GPS signal is xed,
Cardio 35 automatically sets the date and time. To manually set
the date and time, refer to Time settings (see page 8).
7. Press button 2to complete setup.
Training
2
1
Note: During pairing process (with heart
rate monitor/foot pod/cadence sensor/
speed sensor), the LED indicators (on the
top of the icons) will blink. When the sensors
are successfully linked to the device, the LED
indicators will light on.
Activity type
(Bike or Run)
Note: If you want to change your prole, please connect your device to
Brytonsport.com and change the setting via My Device -> Manage Device Data.
Or go to Settings > Others > Prole and change your settings.
6
EN
Buttons
Cardio 35 has four buttons that are used for multiple functions.
Power/BACK (1)
Press to turn on Cardio 35. Press and•
hold to turn it o.
After a training/exercise is stopped,•
press to switch to clock view.
In Setting and Stopwatch modes,•
press to go back to clock view.
OK (2)
In Clock view, press to access Setting.•
In Exercise/Training, press to scroll•
your exercise data.
• InSetting,presstoenterorconrma
selection.
In Stopwatch, press to view the le•
for lap data.
START/STOP (3)
In Clock view, press to start/pause/•
stop exercise, and it will also start/
pause/stop recording at the same
time.
In Setting, press to move up to scroll•
through menu options.
4
3
2
1
In Stopwatch, press to start/stop the•
stopwatch.
LAP (4)
In Clock view, press to switch Bike or•
Run mode.
In Exercise or Stopwatch, press to•
mark lap.
In Setting, press to move down to•
scroll through menu options.
After stopwatch is stopped, press to•
reset the stopwatch.
EN
7
The table below provides a graphical indication on using the
buttons which will be used in later sections.
Buttons Indication
Power/BACK 1
OK 2
START/STOP 3/
LAP 4/
Clock View
There are two types of clock view:
Type 1: Display current time (HH:MM) and date (MM-DD).
Battery Status Icon
Exercise mode
Run/Bike mode
Date
MM/DD
Type 2: Display current time (HH:MM) and secondary time (24-hour
format). Time 2
Secondary time
Current Time
Alarm Icon
Note: By default, “Date” is displayed at
“Time 2” location. If you want to display
secondary time, please see “Display/Hide
Time 2” on page 9.
8
EN
Clock Settings
Auto Calibration by GPS
Use this setting to reset the date and time based on your GPS
location.
Set Alarm
Use this setting to set alarm with Cardio 35.
(Select time format)
(Current time is set)TIME GPS TIME
* indicates screen changes, no button is pressed.
(Time is set)
2 2 2
2
(Alarm is set) (If O, skip this step)
TIME ALARM ON
OFF
2 2 2
22
EN
9
Display/Hide Time 2
Use this setting to display/hide Time2.
(Time 2 display) (Time 2 is set)
Set Daylight Saving Time
Use this setting to set the daylight saving time.
(Daylight saving time is set)
(Select setting)
Note: After you hide Time 2, Clock view will show Date below current time.
TIME TIME 2 ON
OFF
2 2 2
2
TIME Daylight Saving
Time
2 2 2
2
2
10
EN
Start / Pause / Stop Exercising
Press button 3
to start, pause, or end an activity.
Display item
Recording indicator
Exercise type
Display data
GPS signal
Exercise/Training
During exercise or training, Cardio 35 allows you to measure
and record your running activities and displays your current
performance.
You can choose the following activity type:
Bike Mode•
Run Mode•
Note:
Displayed information varies on exercise mode and user preference.•
You can switch Bike or Run mode while in clock view by pressing button• 4.
Before you start
Link sensors (page 18), optional•
Table of contents
Languages:
Other Bryton Watch manuals
