Bryant 367AAN Guide

NOTE TO INSTALLER:

This manual must be left with the equipment user.

USER’S

INFORMATION

MANUAL

MODEL 367RAN

OIL FURNACE

— Do not store or use gasoline or other ﬂammable

vapors and liquids in the vicinity of this or any

other appliance.

— WHAT TO DO IFYOU SMELL OIL:

— Do not try to light any appliance.

— Do not touch any electrical switch; do not use

any phone in your building.

• Immediately call your fuel supplier from a

neighbor’s phone. Follow the fuel supplier’s

instructions.

• If you cannot reach your fuel supplier, call the

ﬁre department.

— Installation and service must be performed by a

qualiﬁed installer, service agency or the fuel

supplier.

WARNING: If the information in this manual

is not followed exactly, a ﬁre or explosion may

result causing property damage, personal injury or

loss of life.

Do not use this furnace if any part has been under

water. Immediately call a qualiﬁed service techni-

ciantoinspectthefurnaceandtoreplaceanypart

of the control system and any oil control which

has been under water.

WELCOMETO A

NEW GENERATION

OF COMFORT

Congratulations! In light of rising

energy costs, the 367RAN Low-

Boy Oil Furnace is among the

soundest investments today’s

homeowner can make.

Your new furnace is truly a tri-

umph of technology in home heat-

ing. Its unique silencer within the

heat exchanger, insulated cabinet,

and rubber blower mounts make it

among the quietest units on the

market. The combustion chamber

is stainless steel for long life and it

heats up quickly resulting in

higher energy efﬁciency.

With only minimal care, your new

furnace will deliver many years of

money-saving home comfort and

enjoyment. Spend just a few min-

utes with this manual to learn the

operation of your new furnace and

the small amount of maintenance

it takes to help keep it operating at

peak efﬁciency year after year.

INSTALLATION DATA

Date Installed

Dealer Name

Address

City

State Zip

Telephone

FURNACE

Product No.

Model No.

Serial No.

SPLIT-SYSTEM

OUTDOOR UNIT:

Product No.

Model No.

Serial No.

INDOOR COIL:

Product No.

Model No.

Serial No.

ACCESSORIES

Product No.

Model No.

Serial No.

MODEL 367RAN LOW-BOY FURNACE

;;

;;;

568

UNUSED

LEADS

123

GWRYC

FURNACE COMPONENTS

Heavy-dutyblower circulatesairacrosstheheat

exchanger to transfer heat into the home.

Access door to air filters and blower.

Air filters.

Unique silencer system eliminates combustion

noise.

Return-air plenum.

Stainless steel combustion chamber.

Heat exchanger designed and shaped to effi-

ciently transfer heat from furnace into the home.

Supply-air plenum.

Fully insulated internal walls minimize heat

loss.

High limit control prevents overtemperature.

Manual switch allows user control of constant

low-speed blower operation.

Adjustable electronic fan timer control (inside)

with low voltage electrical terminal strip for

easy connection of thermostat, cooling control,

electronic air cleaner, and humidifier.

Aesthetic removable cabinet hides and protects

burner and controls.

High-performance oil burner.

IMPORTANT FACTS

Your furnace must have adequate

airﬂow for efﬁcient combustion

and safe ventilation. Do not

enclose it in an airtight room or

“seal” it behind solid doors.

To minimize the possibility of

serious personal injury, ﬁre, fur-

nace damage, or improper opera-

tion,

carefully follow these

safety rules:

• Do not cover the furnace, store

trash or debris near it, or in any way

block the ﬂow of fresh air to the

unit.

• Combustion air must be clean and

not contaminated with chlorine or

ﬂuorine. These compounds are

present in many products around

the home, such as: water softener

salts, laundry bleaches, detergents,

adhesives, paints, varnishes, paint

strippers, waxes, and plastics.

Make sure the combustion air for

your furnace does not contain any

of these compounds. During re-

modeling be sure the combustion

air is fresh and uncontaminated. If

airwithvaporsofthesecompounds

is burned in your furnace, the heat

exchangers and metal vent system

may deteriorate.

NOTE:

Do not use this furnace if

any part has been under water.

Immediately call a qualiﬁed ser-

vice technician to inspect the fur-

nace and to replace any part of the

control system, electrical compo-

nents, and any oil control which

has been under water.

NOTE:

The qualiﬁed installer or

agency must use only factory-

authorized replacement parts, kits,

and accessories when servicing

this product.

The furnace burner control has a

safety device which must be man-

ually reset. If the furnace is left

unattended for an extended period

of time, have it checked periodi-

cally for proper operation. This

precaution will prevent problems

associated with no heat, such as

frozen water pipes, etc.

SAFETY

CONSIDERATIONS

Installing and servicing of heating

equipment can be hazardous due to

oil and electrical components.

Only trained and qualiﬁed person-

nel should install, repair, or service

heating equipment.

Untrained personnel can perform

basic maintenance functions such

as cleaning and replacing air ﬁlters.

All other operations must be per-

formed by trained service person-

nel. Observe safety precautions in

this manual, on tags, and on labels

attached to the furnace and other

safety precautions that may apply.

Recognize safety information.

This is the safety-alert symbol .

When you see this symbol on the

furnace and in instructions or man-

uals, be alert to the potential for

personal injury.

Understand the signal words —

DANGER, WARNING, and CAU-

TION. These words are used with

the safety-alert symbol. DAN-

GERost serious hazards which

will

result in severe personal

injury or death. WARNING signi-

ﬁes hazards which

could

result in

personal injury or death. CAU-

TION is used to identify unsafe

practices which

would

result in

minor personal injury or product

and property damage.

STARTING YOUR

FURNACE

This appliance is equipped with an

ignition device which automatically

lights the burner each time the ther-

mostat starts your furnace.

these important safeguards:

• If a suspected malfunction occurs

with your oil control system, such as

the burner not lighting when it

should, refer to the “Shutting Down

Your Furnace” section and call your

dealer as soon as possible.

FORYOUR SAFETY

Do not store or use gaso-

line or other flammable

vapors and liquids in the

vicinity of this or any

other appliance.

WARNING

For use with grade 2 Fuel Oil

maximum. Do not use Gaso-

line, Crankcase Oil, or any Oil

containing Gasoline! Failure

to follow this warning could

lead to sooting, fire, explo-

sion, and/or severe bodily

harm.

CAUTION

Never burn garbage or paper

in the heating system and

never leave rags, paper, or

any flammable items around

the unit.

CAUTION

This furnace is equipped

with a constant type primary

ignition system. DO NOT

ATTEMPT TO LIGHT WITH A

MATCH.

DANGER

HIGH VOLTAGE AT IGNI-

TOR. Severe electrical

shock, personal injury, or

death could result.

CHECK AIR FILTERS:

Before

attempting to start your furnace, be

sure the furnace air ﬁlters are clean

and in place. See “Performing Rou-

tine Maintenance” section in this

manual. Then proceed as follows:

STEPS FOR STARTING

YOUR FURNACE

1. Open all warm air registers and

make sure that all return-air

grills are unobstructed.

2. If a humidiﬁer is installed with

your system, open the water

supply valve.

3. Make sure blower access door is

secured in place.

4. Set your room thermostat to the

lowest temperature setting. (See

Fig. 5.)

5. Turn on electric power to the

furnace. (See Fig. 6.)

6. Open the oil supply valve. (See

Fig. 7.)

7. Check all connections to ensure

there are no leaks.

8. Set room thermostat to a tem-

perature slightly above room

temperature. This will auto-

matically signal the furnace to

start.

9. When the thermostat calls for

heat, power from the trans-

former energizes the fan control

board. The fan control energizes

the ignition control.The ignition

control will automatically light

the burner.

The electronic fan control auto-

matically turns on the blower

after 60 sec. Fan on control is

not adjustable. The air moved

over the heat exchanger by the

blower is warmed and passes

through the ducts to the room

registers.

This unit is equipped with a con-

tinuous ignition control. If the

main burner does not ignite

within 30 sec from the call for

heat, the control will lock out.

The red button on top of the con-

trol must be depressed for 3 sec

in order to reset the control. The

control CANNOT be reset from

the room thermostat.

10.Set your thermostat to the tem-

perature that satisﬁes your com-

for requirements. SUGGES-

TION: Setting the thermostat

back a few degrees and compen-

sating for the difference with

warmer clothing can make a big

difference in your fuel consump-

tion on extremely cold days. The

few degrees at the top of your

thermostat “comfort level” are

the most costly degrees to obtain.

When room temperature drops

below the temperature selected

on the thermostat, the furnace

will be switched on automati-

cally. When room temperature

reaches the degree selected on

the thermostat, the furnace will

be switched off automatically.

Some thermostats have a FAN

mode with 2 selections, AUTO

and ON. When thermostat is set

to AUTO, the furnace blower

cycles on and off, controlled by

the thermostat. In ON mode,

the furnace blower runs contin-

uously. This keeps the tempera-

ture level in your home more

evenly balanced. It also contin-

uously ﬁlters the indoor air.

NOTE:

Constantlow-speedblower

operation can also be achieved by

turning on the constant blower

rocker switch located on top of

unit. Regardless of room thermo-

stat setting, blower will run contin-

uously in low speed to provide

constant air circulation. If constant

blower rocker switch is turned off,

room thermostat will control

blower operation.

SHUTTING DOWN

YOUR FURNACE

Should you need to shut down your

furnace for service or mainte-

nance, you will need to turn the

furnace off. The following proce-

dures must be followed:

1. Set the thermostat to the lowest

setting. (See Fig. 8.)

2. Turn off all electrical power to

the appliance. (See Fig. 9.)

3. Close the oil supply valve.

(See Fig. 10).

4. If applicable, turn off water sup-

ply to humidiﬁer.

5. If furnace blower will be neces-

sary for cooling system, remem-

ber to turn electric power back

on when needed for air condi-

tioning.

6. If the furnace is being shut down

because of a malfunction, call

your dealer as soon as possible.

ALWAYS KEEP MAIN OIL

VALVE TURNED OFF IF

BURNER IS SHUT DOWN FOR

AN EXTENDED PERIOD OF

TIME.

PERFORMING

ROUTINE

MAINTENANCE

With proper maintenance and care,

your furnace will operate economi-

cally and dependably. Instructions

for basic maintenance follow. How-

ever, before beginning maintenance,

follow these safety precautions:

FILTERING OUT

TROUBLE

Dirty air ﬁlters will cause a loss of

airﬂow in your duct system. When

excessive loss of airﬂow occurs,

the furnace may cycle on its safety

controls. If this condition is left

unattended, the furnace will even-

tually lock out. It is recommended

that the furnace air ﬁlters be

checked every 3 or 4 weeks and

cleaned or replaced as necessary.

The air ﬁlters are located in the

blower compartment installed in

an internal ﬁlter rack which is pro-

vided as standard equipment with

furnace. (See Fig. 2.) To inspect,

clean, and or replace air ﬁlters, fol-

low these steps:

1. Turn off electrical supply to fur-

nace. (See Fig. 11.)

2. Remove blower access door in

rear of furnace. (See Fig. 13.)

Pull out then up using 2 strap

handles on blower access door.

3. Remove air ﬁlters from furnace.

a. Remove ﬁlter resting in ﬁlter

rack at an angle in front of

blower ﬁrst. Slide ﬁlter back

to clear ﬁlter rack ends then

lift up and out of ﬁlter rack

and blower compartment.

(See Fig. 14.))

WARNING

Turn off all electrical power to

furnace before performing

any maintenance or service

on unit. Failure to take this

precaution may result in per-

sonal injury due to electrical

shock.

CAUTION

Although special care has

been taken to minimize sharp

edges, be extremely careful

when handling parts or

reaching into the furnace.

CAUTION

Never operate your furnace

without the air filters in place.

Doing so may damage the

furnace blower motor. An

accumulation of dust and lint

on internal parts of your

furnace can cause a loss of

efficiency.

b. Remove second ﬁlter lying

above blower. Slide ﬁlter

toward rear of furnace and

out of blower compartment.

(See Fig. 15.)

4. Inspect the ﬁlter. If torn, replace

it.

NOTE:

If ﬁlter that was shipped

with furnace has been replaced

with an electronic air cleaner

(EAC), refer to the EAC Owner’s

Manual for maintenance informa-

tion.

5. The ﬁlters shipped with the fur-

nace are disposable. If they are

dirty, they must be replaced. If

your furnace air ﬁlter needs to

be replaced, be sure to use the

same size and type of ﬁlter that

was originally supplied. Use the

furnace ﬁlter table and compare

your furnace size with the

proper ﬁlter size.

FURNACE AIR FILTERTABLE

If you have replaced the factory-

provided disposable ﬁlters with

permanent washable ﬁlters, they

may be cleaned if they are dirty.

Wash ﬁlters in a sink, bathtub, or

outside with a garden hose.Always

use cold tap water. A mild liquid

detergent may be used if necessary.

Spray water through ﬁlter in the

opposite direction of airﬂow.

Allow ﬁlter to dry.

6. Reinstall clean air ﬁlters by

reversing procedure in item

3 above.

7. Replace blower access door.

(See Fig. 16.)

8. Turn on electrical supply to

furnace.

A CHECK-UP

CHECKLIST

Your furnace represents an impor-

tant investment in your family’s

comfort and your home’s value. To

keep it performing properly and as

a preventative to future problems,

have a trained service specialist

give your furnace a professional

check-up annually. The following

checklistcan be used as a guideline

to proper service:

• Check ﬂue and secondary tube pas-

sage ways including chimney —

clean if necessary.

• Change oil ﬁlter.

• Change nozzle.

• Check and adjust combustion and

draft.

• Inspect all vent piping inside struc-

ture for deterioration and vent termi-

nations outside the structure for

blockage.

• Check oil pipes leading to and

inside of your furnace for leaks.

• Inspect and clean the blower motor

and wheel.

• Inspect and change or clean air ﬁl-

ters if necessary.

• Inspect all supply- and return-air

ducts for obstructions, air leaks, and

insulation. Remedy any problem

when necessary.

• Inspect the return-air duct connec-

tions at the furnace to ensure it

is physically sound, sealed to

the furnace casing, and terminates

outside the space containing the

furnace.

• Inspect electrical wiring, connec-

tions, and components for loose

connections.

• Examine the physical support of

the furnace. Support should be

sound with no cracks, sagging, gaps,

etc. around the base.

• Check furnace for any obvious

signs of deterioration.

BEFOREYOU REQUEST

A SERVICE CALL

If your furnace is not operating or

not performing properly, you may

save the expense of a service call

by checking a few things yourself

before calling for service.

FOR INSUFFICIENT AIRFLOW:

• Check for dirty air ﬁlters.

• Check for blocked return-air or

supply-air grilles throughout your

home. Ensure they are open and

unobstructed.

If problem still exists, call your

dealer for service.

IF FURNACE FAILS TO

OPERATE:

Follow this checklist step by step,

advancing to the next step only if

furnace fails to start.

• Check thermostat for proper tem-

perature. Is thermostat set above

room temperature?

• Is thermostat set on HEAT?

• Check fuses and circuit breakers.

Is electrical supply on?

• Is valve in oil supply pipe in open

position?

• Is the ignition control on the burner

not in lockout? The red button on top

FURNACE

CASING

DEPTH

(IN.)

FILTER

QUANTITY

AND SIZE

(IN.)

FILTER

TYPE

53-3/4 (2) 12 X 20 X 1 Disposable

60-5/32 (2) 16 X 20 X 1 Disposable

Cancels: NEW OM16-11

Catalog No. 5336-702 11-00

of the control must be depressed for 3

sec in order to reset the control.

• Check for obstructions around the

vent termination.

If the furnace still fails to operate,

call your service representative. For

your convenience, record the fur-

nace product and serial numbers on

page 2. Should you ever require ser-

vice, you will have ready access to

the information needed by your ser-

vice representative.

Other manuals for 367AAN

This manual suits for next models

Table of contents

Other Bryant Furnace manuals

Bryant

Bryant 362AAN Instructions and recipes

Bryant

Bryant 935CA Guide

Bryant

Bryant 922SA Guide

Bryant

Bryant 350AAV Instructions and recipes

Bryant

Bryant A10252 User manual

Bryant

Bryant 925SA Series Operation manual

Bryant

Bryant 368RAN Guide

Bryant

Bryant 333B-AV-036060-AA-JA User manual

Bryant

Bryant GAS=FIRED COUNTERFLOWED FURNICE 396D Operation manual

Bryant

Bryant CONDENSING GAS FURNACE 350MAV Instructions and recipes

Bryant

Bryant 66120 Guide

Bryant

Bryant DELUXE 355AAV Operation manual

Bryant

Bryant PLUS 95S Operation manual

Bryant

Bryant 330AAV B Series Instructions and recipes

Bryant

Bryant 986TB Guide

Bryant

Bryant 912SC Operation manual

Bryant

Bryant 393U Operational manual

Bryant

Bryant 395C Series Guide

Bryant

Bryant OBM112 User manual

Bryant

Bryant 396HAD Installation and user guide

Bryant

Bryant GAS-FIRED INDUCED-COMBUSTION FURNACE 393AAV Guide

Bryant

Bryant 369RAN Guide

Bryant

Bryant 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURNACE... Operation manual

Bryant

Bryant EVOLUTION 987MA Operation manual

Popular Furnace manuals by other brands

Armstrong

Armstrong EG7H SERIES Installation and maintenance instructions

Payne

Payne PG92ESA Installation, start-up, operating and service and maintenance instructions

SUPREME

SUPREME FEM10-M2301CM-A Installation instructions and homeowner's manual

Ingersoll-Rand

Ingersoll-Rand S9V2B080D4VSAC/D Installer's guide

Johnson Controls

Johnson Controls TM9T User's information manual

Fluke

Fluke 9118A user manual

Lennox

Lennox EL195UHE Elite Series Unit information

Intertherm

Intertherm M7RL Series user manual

HDG

HDG Pelletmaster 15 Operation manual

Pinnacle

Pinnacle Aero Bella AB-716C-QH User's manual and operating instructions

Nortek

Nortek MG2S Series installation instructions

VERDER

VERDER CARBOLITE GERO ABF 8/28 Installation, operation and maintenance instructions

Goodman

Goodman GMV9 Installation & operating instructions

SUPREME

SUPREME SUP10-M2301C Installation instructions and homeowner's manual

Dettson

Dettson AMT400B34-SM1PMA Installation instructions and homeowner's manual

Evcon

Evcon DGD 60 MBH installation instructions

Trane

Trane S8B1A026M2PSAB Installer's guide

Hart Sceintific

Hart Sceintific 9113 user manual