Brother Dcp-9015cdw Operating manual

Please read this guide before attempting to operate the product, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation. Brother shall not be liable for damage caused where the product owner

has failed to follow the instructions set out in this guide.

How to use this guide: 1

1 Read the whole guide before using your product and keep it for later reference.

2 Carefully follow the instructions set out in this guide and always ensure that you follow all

warnings and instructions marked on the product.

3 If you have concerns about how to use your product having read this guide, please refer to

Brother customer service or your local Brother dealer.

4 To ensure you understand all of the instructions, study the symbols and conventions used in the

documentation.

Product Safety Guide 1

(HL-3140CW / HL-3150CDN / HL-3150CDW / HL-3170CDW /

DCP-9015CDW / DCP-9020CDN / DCP-9020CDW /

MFC-9140CDN / MFC-9330CDW / MFC-9340CDW)

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

Version B

UK/IRE

Symbols and conventions used in the

documentation 1

The following symbols and conventions are used throughout the documentation.

Follow all warnings and instructions marked on the product.

WARNING

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

Notes tell you how you should respond to a

situation that may arise or give tips about how

the operation works with other features.

NOTE

• Not all models are available in all

countries.

• The illustrations in this guide show the

HL-3170CDW and MFC-9340CDW.

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Hot Surface icons warn you not to

touch product parts that are hot.

Prohibition icons indicate actions

that must not be performed.

Bold Bold typeface identifies

specific buttons on the

product’s control panel or on

the computer screen.

Italics Italicized typeface

emphasizes an important

point or refers you to a related

topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the product.

Compilation and Publication Notice 1

This manual has been compiled and published to provide the latest product safety information at

the time of publication. The information contained in this manual may be subject to change.

For the latest manual, please visit us at http://solutions.brother.com/.

Choose a safe location for your product 1

Put your product on a flat, level, stable surface free from vibration and shocks, such as a desk.

Put the product near a telephone socket (MFC only) and a standard earthed electrical socket.

Choose a location where the temperature remains between 10C and 32.5C and the humidity is

between 20% to 80% (without condensation).

WARNING

DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,

moisture or dust. Doing so may create a risk of an electrical shock, short circuit or fire. It may

also damage the product and/or render it inoperable.

DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.

Doing so may create the risk of an electrical shock, short circuit or fire, as water may come into

contact with the product (including condensation caused by heating/air conditioning/ventilation

equipment).

DO NOT place the product near chemicals or in a place where chemical spillage could occur. In

particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve,

risking fire or electric shock. They may also cause the product to malfunction or become

discoloured.

DO NOT put the product in a location that blocks or obstructs any slot or opening in the product.

These slots and openings are provided for ventilation. Blocking the product’s ventilation could

create a risk of overheating and/or fire.

Instead:

• Keep a gap of at least 150 mm between the ventilation hole and the wall.

• Place the product on a solid level surface.

• DO NOT place this product near or over a radiator or heater.

• DO NOT place this product in a “built-in” installation unless adequate ventilation is provided.

CAUTION

This product emits some chemical substances during printing, and additionally if used for

prolonged periods or in poorly ventilated areas may cause the emission of odorous gases such

as ozone. Place the product in a well ventilated area for optimum performance and comfort.

Avoid placing your product in a busy area. If you must place it in a busy area, ensure that the

product is in a safe location where it cannot be accidentally knocked over, which could cause

injury to you or others and serious damage to the product. Also ensure that cords are secured

so as not to pose a tripping hazard.

DO NOT connect your product to electrical sockets controlled by wall switches or automatic

timers, or to the same circuit as large appliances, such as an air conditioner, copier, shredder,

etc. that might disrupt the power supply.

DO NOT eat the silica gel pack, please throw it away. If ingested seek medical attention

immediately.

DO NOT place heavy objects on the product.

DO NOT place this product on an unstable cart, stand, or table. The product is heavy and may

fall, causing injury to you and serious damage to the product. For MFC and DCP products, there

is an added risk of injury if the scanner glass should break. Particularly, if you have children,

please make sure the product is located in a safe position.

IMPORTANT

• DO NOT put objects on top of the product. Doing so could increase the risk of overheating

should the product malfunction.

• DO NOT place anything in front of the product that will block printed documents or faxes (MFC

only).

• DO NOT place your product next to sources of interference, such as speakers or the base units

of non-Brother cordless telephones. Doing so may interfere with the operation of the product's

electronic components.

• Disruption of power can delete information from the product’s memory.

General precautions 1

WARNING

Plastic bags are used in the packing of your product. To avoid danger of suffocation, keep these

plastic bags away from babies and children. Plastic bags are not toys.

• DO NOT put a toner cartridge, a toner cartridge and drum unit assembly, or a waste toner

box into a fire. It could explode, resulting in injuries.

• DO NOT use flammable substances near the product. DO NOT use any type of spray to

clean the inside or outside of the product. Doing so may cause a fire or electrical shock. For

instructions on how to clean the product, see User's Guide/Basic User's Guide: Routine

Maintenance.

DO NOT attempt to operate this product when a paper jam or stray pieces of paper are inside

the product. Prolonged contact of paper with the fuser unit could cause a fire.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner

dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the

toner dust with a dry, lint-free soft cloth and dispose of it according to local regulations.

Unplug this product from the wall socket before cleaning the product and the scanner glass

(MFC and DCP only). DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for

cleaning.

Avoid using this product during an electrical storm. There may be a remote risk of an electric

shock from lightning.

Should you come into contact with toner, follow these instructions:

• Inhalation

Obtain immediate medical attention. In case of accident by inhalation remove casualty to

fresh air and keep at rest.

• Skin contact

Remove contaminated clothing immediately and wash affected skin with plenty of water or

soap and water.

• Eye contact

Obtain medical attention. If substance has got into the eyes, immediately wash out with

plenty of water for at least 15 minutes.

• Ingestion

Obtain immediate medical attention. Wash out mouth with water and give 200 - 300 ml (half

a pint) of water to drink.

For more safety information regarding the toners used in your product, please visit the following

web address to read the Safety Data Sheets (SDS) http://sds.brother.co.jp/sdsapp/index.html.

HOT SURFACE

After you have just used the product, some internal parts of the product will be extremely hot.

Wait at least 10 minutes for the product to cool down before you touch the internal parts of the

product.

(MFC and DCP only)

This product is heavy and weighs more than 20.0 kg. To prevent possible injuries, at least two

people should lift the product. One person should hold the front of the product, and one person

should hold the back, as shown in the illustration below. Be careful not to trap your fingers when

you put the product down.

(MFC only)

Use caution when modifying telephone lines. Never touch exposed telephone wiring or

terminals unless the telephone line has been unplugged from the wall socket. Never fit

telephone wiring during a lightning storm. Never fit a telephone wall socket in a location that is

wet or may become wet, for example, near a refrigerator or other appliance that produces

condensation. Doing this might cause an electrical shock.

CAUTION

(MFC and DCP only)

Some areas of the product can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations, and DO NOT close the covers

with force.

(MFC and DCP only)

To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.

IMPORTANT

DO NOT remove or damage any of the caution or warning labels inside the product.

200°C

390°F

200°C

390°F

Other manuals for dcp-9015cdw

This manual suits for next models

Table of contents

Other Brother All In One Printer manuals

Brother

Brother MFC-J4310DW User guide

Brother

Brother MFC-J265W User manual

Brother

Brother DCP-T300 Operating and maintenance manual

Brother

Brother MFC-J615W Operating and maintenance manual

Brother

Brother MFC 5490CN - Color Inkjet - All-in-One Parts list manual

Brother

Brother DCP-9040CN User manual

Brother

Brother HL-4150CDN Installation instructions

Brother

Brother MFC-215C User manual

Brother

Brother MFC-J220 User manual

Brother

Brother MFC 3220C - Color Inkjet - All-in-One User manual

Brother

Brother PPF4100e User manual

Brother

Brother DCP-9270CDN Assembly instructions

Brother

Brother MFC-7360N Operating and maintenance manual

Brother

Brother DCP-J100 User manual

Brother

Brother MFC-9010CN User manual

Brother

Brother MFC 3420C - Color Inkjet - All-in-One User manual

Brother

Brother MFC-J245 User manual

Brother

Brother HL-L8250CDN User manual

Brother

Brother MFC 3100C - Inkjet Multifunction User manual

Brother

Brother MFC-J280W User manual

Brother

Brother MFC-J4310DW Operating manual

Brother

Brother MFC-8690DW User manual

Brother

Brother MFC-J200 User manual

Brother

Brother DCP 110c - Color Flatbed Multi-Function... Quick start guide

Popular All In One Printer manuals by other brands

Triumph Adler

Triumph Adler DC 2016 Instruction handbook

Epson

Epson WorkForce WF-2510 Basic guide

Epson

Epson Stylus Scan 2000 Product information guide

Epson

Epson PictureMate Snap PM 240 Start here

Konica Minolta

Konica Minolta bizhub C35 user guide

Konica Minolta

Konica Minolta BIZHUB 558 Quick reference guide

Lexmark

Lexmark MX710 Series setup sheet

Lexmark

Lexmark XC8155 user guide

Lexmark

Lexmark X642E Service manual

Sharp

Sharp MX-2310U Start guide

Aficio

Aficio 200 manual

Canon

Canon ImageCLASS 2300 setup sheet

Ricoh

Ricoh Pro C900 Brochure & specs

Lexmark

Lexmark X925 Installation

Epson

Epson Stylus CX8400 Series Brochure & specs

Oce

Oce VarioLink 5022 user guide

Copystar

Copystar CS 4551ci Specifications

Konica Minolta

Konica Minolta Magicolor 4650EN Service manual

Brother dcp-9015cdw Operating manual

Popular All In One Printer manuals by other brands