Broadcom F5D7010CE2 User manual

CETECOM Inc.

411 Dixon Landing Road, Milpitas, CA-95035, USA

Phone: +1 408 586 6200 Fax: +1 408 586 6299

www.cetecom.com

Issued test report consists of 25 Pages Page 1 (25)

Test report no.: EMC_381EN489-17_2002

ETSI EN 301 489-17 V1.1.1 (2000-09)

(BCM94306CB)

FCC LISTED, REG. NO.: 101450

RECOGNIZED BY INDUSTRY CANADA

IC – 3925

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 2 (25)

Table of Contents

1 General information

1.1 Notes

1.2 Testing laboratory

1.3 Details of applicant

1.4 Application details

1.5 Test item

1.6 Test standards

2 Technical test

2.1 Summary of test results

2.2 Test report

1 General information

1.1 Notes

The test results of this test report relate exclusively to the test item specified in 1.5. The CETECOM

Inc. USA does not assume responsibility for any conclusions and generalisations drawn from the test

results with regard to other specimens or samples of the type of the equipment represented by the test

item. The test report may only be reproduced or published in full. Reproduction or publication of

extracts from the report requires the prior written approval of the CETECOM Inc USA.

TEST REPORT PREPARED BY:

EMC Engineer: Philip Kim

1.2 Testing laboratory

CETECOM Inc.

411 Dixon Landing Road, Milpitas, CA-95035, USA

Phone: +1 408 586 6200 Fax: +1 408 586 6299

E-mail: [email protected]

Internet: www.cetecom.com

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 3 (25)

1.3 Details of applicant

Name : Broadcom corporation

Street : 190 Mathilda Place

City / Zip Code : Sunnyvale, 94086

Country : USA

Contact : Chris McGough

Telephone : 408-922-5810

Tele-fax : 408-543-3399

e-mail : cmcgough@broadcom.com

1.4 Application details

Date of receipt of application : 2002-12-19

Date of receipt test item : 2002-11-21

Date of test : 2002-12-06, 2002-12-13 and 2002-12-14

1.5 Test item

Manufacturer : See Applicant

Model No. : BCM94306CB

Description : 54g Wireless Lan cardbus PC card

Additional information

Frequency : 2412MHz – 2472MHz

Type of modulation : OFDM (orthognal frequency division multiplexing)

Number of channels : 13

Antenna : 1dBi external antenna

Power supply : From Host

Output power : 16.09dBm (40.64mW) max. EIRP

Extreme temp. Tolerance : 0 to +50 oC

1.6 Test standards: ETSI EN 301 489-17 V1.1.1 (2002-09)

ETSI EN 301 489-1 V1.2.1 (2000-08)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 4 (25)

2 Technical test

2.1 Summary of test results

No deviations from the technical specification(s) were ascertained in the course of the tests

Performed

Final Verdict:

(only “passed” if all single measurements are “passed”) Passed

Technical responsibility for area of testing:

2003-01-10 EMC & Radio Lothar Schmidt (Manager)

Date Section Name Signature

Responsible for test report and project leader:

2003-01-10 EMC & Radio Philip Kim (EMC Engineer)

Date Section Name Signature

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 5 (25)

2.2 Test report

TEST REPORT

Test report no. : EMC_381EN489-17_2002

(BCM94306CB)

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 6 (25)

SUMMARY OF TEST RESULTS 7

EMISSION(EMI) 7

IMMUNITY(EMS) 7

GENERAL PERFORMANCE CTIRERIA 8

EMISSION TEST: 9

RADIATED EMISSIONS 9

AC LINE CONDUCTED EMISSIONS 10

HARMONIC CURRENT EMISSIONS 11

FLICKER AND VOLTAGE FLUCTUATION 12

IMMUNITY TEST: 13

RADIATED, RF ELECTROMAGNETIC FIELDS 13

RF COMMON MODE 14

ELECTROSTATIC DISCHARGE 15

FAST TRANSIENTS COMMON MODE 16

SURGES COMMON & DIFFERENTIAL MODE (1-phase) 17

VOLTAGE DIPS 18

PLOTS 19

TEST EQUIPMENT AND ANCILLARIES USED FOR TESTS 21

PHOTOGRAPHS 24

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 7 (25)

SUMMARY OF TEST RESULTS

EMISSION (EMI)

EMI

Phenomenon

Port Requirements EUT set-

Result Applicability

Standard Basic standard

Conducted

Interference voltage,

0.15 – 30*MHz

AC Mains

ETSI EN 301 489-1,

2000-08

Chap. 8.4

EN 55022:1998

+Corr.2001 + A1:2000 na Complies Not Applicable

Radiated

Interference Field

Strength

30 – 1000*MHz

Enclosure

ETSI EN 301 489-1,

2000-08

Chap. 8.2

EN 55022:1998

+Corr.2001 + A1:2000 na Complies Applicable

Harmonic Current

Emissions

AC mains

input port

ETSI EN 301 489-1,

2000-08

Chap. 8.5

EN 61000-3-2: 2000 na Complies Not Applicable

Flicker & Voltage

Fluctuation

AC mains

input port

ETSI EN 301 489-1,

2000-08

Chap. 8.6

EN 61000-3-3: 2000 na Complies Not Applicable

IMMUNITY (EMS)

EMS

Phenomenon

Port Requirements EUT set-

Result Applicability

Standard

Basic standard

Electrostatic

discharge

(ESD)

Enclosure

ETSI EN 301 489-1,

2000-08

Chap. 9.3

EN 61000-4-2: 1995

+A1: 1998+A2:2001 na Complies Applicable

RF-electro-magnetic

field Enclosure

ETSI EN 301 489-1,

2000-08

Chap. 9.2

EN 61000-4-3: 1996

+A1: 1998+A2:2001 na Complies Applicable

Fast transients,

BURST

Powerline

AC / DC

ETSI EN 301 489-1,

2000-08

Chap. 9.4

EN 61000-4-4: 1995

+A1: 2001 na Complies Not Applicable

Surge Powerline

(1 phase)

ETSI EN 301 489-1,

2000-08

Chap. 9.8

EN 61000-4-5: 1995

+A1: 2001 na Complies Not Applicable

Transients & Surges

vehicular

evironment

Powerline

(car

charger)

ETSI EN 301 489-1,

2000-08

Chap. 9.6

ISO 7637-1/2:1990

(12/24VDC) na Complies Not Applicable

RF Common mode

Powerline

AC/DC

signal lines

ETSI EN 301 489-1,

2000-08

Chap. 9.5

EN 61000-4-6: 1996

+A1: 2001 na Complies Not Applicable

Vol. Dips,

interruptions &

fluctuations (AC

Power)

Input &

output AC

ports only

ETSI EN 301 489-1,

2000-08

Chap. 9.7

EN 61000-4-11: 1994

+A1: 2001 na Complies Not Applicable

na=not applicable

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 8 (25)

GENERAL PERFORMANCE CRITERIA

The performance criteria are:

-performance criteria A for immunity tests with phenomena of a continuous nature;

Communication between the BCM94306CB and BCM94306MP in the form of pings should not drop

during the test.

-performance criteria B for immunity tests with phenomena of a transient nature;

N/A

-performance criteria C for immunity tests with power interruptions exceeding a certain time.

N/A

NOTE: For details see subclause 6.2 ETSI EN 301 489-17

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 9 (25)

EMISSION TEST:

RADIATED EMISSIONS

This test assessses the ability of ancilliary equipment to limit their internal noise from being radiated from the enclosure.

According to EMC basic standard (EN 55022)

Measurement according to EMC basic standard, but performed in the anechoic chamber with a reduced measuring distance of

3m. The reduction of the measuring distance and the existing floor absorber are corrected with the chamber factor (Method

Dr. Garn, Austrian Research Centre, Seibersdorf). The test results of the anechoic chamber correspond to the 10m-OATS

results

Test setup

EUT was setup in an anechoic chamber

Limits

Freq. Range

Limit (Quasi peak)

30MHz – 230MHz 30dBµV/m

230MHz – 1000MHz 37dBµV/m

EUT Type and

S/N or EUT set-up

no.

Set.

Plot

No.

receiving

antenna

directed to

angle of

turntable

polari-sation

(h / v)

comment

(e.g. operating mode or

operating mode no.)

result

(passed /

failed)

1.1 -- 0 º - 360º h/v EUT operating mode 3 Passed

Remarks: All measurements were carried out in peak mode. As long as the values stay under the average limit line

No QP measurements are carried out.

CETECOM Inc.

Test report no.:EMC_381EN489-17_2002 Issue date:2003-01-10 Page 10 (25)

AC LINE CONDUCTED EMISSIONS

According to EMC basic standard (EN 55022 [7] Class-B)

1.For the table top EUT the distance to the reference ground plane (wall) should be 40 cm.

2.AC input line plugged into LISN

EUT Operating mode

Tx at middle. channel

Plot no. Powerline

(L,N)

EUT operating mode or

operating mode no.

Detector

(Peak,

AV, QP)

Additional (scan-) information

(e.g. Pre-test Fastscan,

Maxhold,

Final measurement)

Result

(passed /

failed )

-- L+N QP Final measurement N/A

Note: This test does not apply due to the fact that EUT’s power is host dependant.

This manual suits for next models

Table of contents

Other Broadcom Computer Hardware manuals

Broadcom

Broadcom MegaRAID SAS 9365-28i User manual

Broadcom

Broadcom AFBR-S50 Guide

Broadcom

Broadcom MegaRAID SAS 9361-4i User manual

Broadcom

Broadcom BCM1250 User manual

Broadcom

Broadcom MegaRAID 9540-2M2 User manual

Broadcom

Broadcom Brocade X6-4 User manual

Broadcom

Broadcom Brocade X6-8 Director Manual

Broadcom

Broadcom Brocade X7-8 User manual

Broadcom

Broadcom F5D7010CE1 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual