Briteq B06031 User manual
ENGLISH INSTALLATION MANUAL V1.0
BRITEQ®1/2 BT-THEATRE YOKE ADAPTER-HD1
INSTALLATION MANUAL
Thank you for buying this Briteq®product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
•This kit adapts the “BT-THEATRE YOKE” perfectly to the “BT-THEATRE HD1” theatre Fresnel.
•The kit consists of 4 extra parts:
•Custom-made aluminum cylinder
•1pc M10 “hex socket head” bolt L=50mm
•1pc M10 “hex socket head” bolt L=30mm
•1pc M10 “spring washer”
•All installation accessories for easy installation are included
MECHANICAL ASSEMBLY:
IMPORTANT: To save time, follow the steps below very carefully!
Please also check the user/assembly manual of the “BT-THEATRE YOKE”
You can also check the INSTRUCTION VIDEO: CLICK HERE to better understand
some steps in the assembly process.
DIFFERENT PARTS
You will not need all parts: here is a selection of the parts that you will need / not need anymore.
PARTS NOT NEEDED ANYMORE PARTS NEEDED FOR THE ASSEMBLY
ENGLISH INSTALLATION MANUAL V1.0
BRITEQ®2/2 BT-THEATRE YOKE ADAPTER-HD1
PREPARE SOME OF THE PARTS
1. Take the aluminum cylinder named “I” and insert 2 of the M4 screws “D” → see picture
2. Cylinders “A” and “B” are identical: take one of them and make the central hole bigger using
a metal drill Ø 10mm. From now on we call this cylinder “B”
REMOVE THE ORIGINAL BRACKET
3. Unscrew and remove the L-handle on the left side of the projector: not needed anymore!
4. Unscrew and remove the M10 Hex bolt on the right side of the projector: not needed anymore, except for
the biggest washer.
5. Remove the complete bracket: not needed anymore.
6. Keep the 2 big, thin copper colored washers: both are still needed.
INSTALL THE NEW CYLINDERS
7. Fix the cylinder “I” firmly using parts “F” and “G” on the left
side where you removed the L-handle
8. Now fix cylinder “A” on top of cylinder “I”, using four “D”
screws.
9. Put the 2 copper washers on the right side of the projector and
squeeze the 2 copper washers with cylinder “B” (with 10mm hole).
10.Fix the Yoke on cylinder “B” using the M10 bolt “H” and a big black
washer from the original bracket.
11.Turn the projector so the left side is facing you.
12.Open the Yoke a little so it can be put over the cylinder “A”
13.Fix the Yoke firmly using the long M10 bolt named “C” + spring washer “E”
14.Done
All information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.briteq-lighting.com
Copyright © 2019 by BEGLEC NV - ‘t Hofveld 2C ~ B1702 Groot-Bijgaarden ~ Belgium
Reproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
This manual suits for next models
1
Table of contents
Other Briteq Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
