BRINKMANN PUMPS BBV1 User manual
Operating instructions (Translation)
BBV1, BBV2 100 bar and higher
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
BBV1-2 100 bar and higher
Englisch
2018-11-26
Table of Content
1 General 4
1.1 About the documentation 4
1.2 Manufacturer´s address 4
1.3 Symbolism 5
2 Safety 6
2.1 Intended use 6
2.2 Personnel qualification and training 6
2.3 Basic safety instructions 6
2.4 Basic hazards 7
3 Device description 8
3.1 Functional principle 8
3.2 Basic design 9
4 Technical data 11
4.1 General 11
4.2 Permissible pressure range 12
4.2.1 Operating pressure 12
4.2.2 Layout pressure setting range - flow rate BBV1, 2 12
4.3 Permissible temperature range 12
4.4 Material data 12
4.5 Dimensions 12
5 Transport and storage 13
5.1 General 13
5.2 Storage 13
6 Installation 15
6.1 Safety instructions for installation 15
6.2 Mechanical installation 16
6.2.1 Preparation 16
6.2.2 Screw-in valve 16
6.2.3 Pipeline installation 16
6.3 Connection lines 17
6.3.1 General 17
6.3.2 Mounting Connection lines 17
7 Operation start-up 18
7.1 Safety instructions for start-up 18
7.2 Pressure setting 19
7.3 Further operation start-up 21
8 Removal 22
8.1 Safety instructions for removal 22
8.2 General 23
9 Maintenance 24
9.1 Safety instructions for maintenance 24
9.2 Maintenance work 25
9.3 Maintenance instructions 25
10 Repairs 27
10.1 Safety instructions for repair 27
10.2 General 28
10.3 Detecting and eliminating failures 29
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
4
2018_11_26 BBV1-2 100 bar and higher
1 General
1.1 About the documentation
These operating instructions describe the installation, operation and maintenance
of the following device:
Pressure relief valve BBV1-2 100 bar and higher,
The device is manufactured in different versions. Information about the version
concerned in the individual case can be found on the device's type plate.
These operating instructions are a component of the device and must be kept ac-
cessible for the personnel near the device at all times.
If you have any questions about these operating instructions, please contact the
manufacturer.
1.2 Manufacturer´s address
Brinkmann Pumpen
K. H. Brinkmann GmbH & Co. KG
Friedrichstraße 2
DE 58791 Werdohl
Tel: +49 (0) 23 92 / 5006-0
Fax: +49 (0) 23 92 / 5006-180
E-mail: sales@brinkmannpumps.de
Web: www.brinkmannpumps.de
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
BBV1-2 100 bar and higher 2018_11_26
5
1.3 Symbolism
DANGER
Identification of an immediate hazard, which would result in death or severe bod-
ily injury if not avoided.
WARNING
Identification of a potential medium risk hazard, which would lead to death or se-
vere bodily injury if not avoided.
CAUTION
Identification of a low risk hazard, which could lead to minor or medium bodily inju-
ry if not avoided.
NOTICE
Flagging of notices to prevent property damage.
Identification of basic safety instructions. Non-compliance can lead to hazards for
people and the device.
Flagging of special user tips and other especially useful or important information.
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
6
2018_11_26 BBV1-2 100 bar and higher
2 Safety
2.1 Intended use
1. The device has been designed for operation with fluid.
2. The device may be operated in filled condition only.
The medium must be compatible with the materials used in the device. The
chemical competence is necessary for this. Be careful with ethylene oxide or
other cathalytic or exothermic or self-decomposing materials. Please consult
the manufacturer in cases of doubt.
3. The device may be operated only in usual industrial atmospheres. If there are
any aggressive substances in the air, always ask the manufacturer.
4. Operation of the device is only permissible when complying with the operating
instructions and applicable documents.
Deviating operating conditions require the express approval of the manufac-
turer.
5. In case of any use of the device not according to specification, any warranty is
voided.
2.2 Personnel qualification and training
The staff designated to assemble, operate and service the device must be properly
qualified. This can be through training or specific instruction. Personnel must be
familiar with the contents of this operating instructions.
Read the operating instructions thoroughly before use.
2.3 Basic safety instructions
1. Comply with existing regulations on accident prevention and safety at work
along with any possible internal operator regulations.
2. Pay attention to the greatest possible cleanliness.
3. Wear suitable personal protection equipment.
4. Do not remove, make illegible or obliterate type plates or other references on
the device.
5. Do not make any technical changes on the device.
6. Maintain and clean the device regularly.
7. Use spare parts approved by the manufacturer only.
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
BBV1-2 100 bar and higher 2018_11_26
7
2.4 Basic hazards
DANGER
Hazardous fluids!
Danger of death when handling hazardous fluids.
1. Comply with the safety data sheets and regulations on handling hazardous
fluids.
2. Collect and dispose of hazardous fluids so that no hazards arise for people
or the environment.
WARNING
Failure of load-carrying parts due to overload!
Danger of injury from flying parts.
Danger of injury from spurting fluids.
1. Depressurise the device and all connection lines before doing any work.
2. Securely prevent the restoration of pressure while working on the device.
WARNING
Failure of load-carrying parts due to overload!
Danger of injury from flying parts.
Danger of injury from spurting fluids.
1. Use only connections and lines approved for the expected pressure range.
2. Securely prevent exceeding the permissible pressure, e.g. by using pressure
relief valves or rupture discs.
3. Design pipework so that no tensions, e.g. caused by changes in length due to
fluctuations in temperature, are transmitted to the device.
WARNING
Failure of load-carrying parts due to overload!
Danger of injury from flying parts.
Danger of injury from spurting fluids.
1. Consider the permissible pressure setting range of the valve.
2. Check the pressure setting (the valve must not block).
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
8
2018_11_26 BBV1-2 100 bar and higher
3 Device description
3.1 Functional principle
Pressure relief valves of the BBV1-2 series are directly operated seat valves and
are used to safeguard low-pressure hydraulic circuits.
Explanation
1
Housing
2
Valve cone
3
Valve seat
4
Threaded bush
5
Compression spring
6
Hexagonal nut
7
Adjustment screw
8
Protective cap
The valve cone is pressed by the compressed spring into the valve seat, which
blocks Pressure connection (P) from Tank connection (T). When the response
pressure is reached by adjusting with the setscrew, the valve cone releases the
fluid flow to the tank connection.
The valve should preferably be mounted vertical, with the adjustment screw facing
down.
The flow direction is marked with an arrow on the unit housing. It is always imple-
mented from the pressure port (P) to the tank connector (T).
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
BBV1-2 100 bar and higher 2018_11_26
9
3.2 Basic design
EBV1, 2
BBV1, 2
Explanation
Explanation
1.
Damping plugs
1.
Housing
2.
Valve seat
2.
Damping plugs
3.
O-Ring
3.
Valve seat
4.
Valve cone
4.
O-Ring
5.
O-Ring
5.
Valve cone
6.
Support ring
6.
O-Ring
7.
Compression spring
7.
Support ring
8.
Threaded bush
8.
Compression spring
9.
O-Ring
9.
Threaded bush
10.
Support ring
10.
O-Ring
(only NG 20)
11.
Support ring
11.
Hexagonal nut
(only NG 20)
12.
Adjustment screw
12.
Hexagonal nut
13.
Protective cap
13.
Adjustment screw
14.
Protective cap
Pressure relief valve BBV1-2, BBVH1-2 100 bar and higher
10
2018_11_26 BBV1-2 100 bar and higher
BBVH1, 2
Explanation
1.
Housing
10.
O-Ring
2.
Damping plugs
11.
Support ring
3.
Valve seat
(only NG 20)
4.
O-Ring
12.
Check nut
5.
Valve cone
13.
Adjustment screw
6.
O-Ring
14.
Twist grip
7.
Support ring
15.
Washer
8.
Compression spring
16.
Hexagonal nut
9.
Threaded bush
17.
Washer
This manual suits for next models
3
Table of contents
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
