Brik AP-32H User manual

Model: AP-32H

ADC+DAC Headphone Amplifier

Dear Friends,

Thank you for purchasing BRIK AP-32H, you can find content as below in the box.

BRIK AP-32H x 1 unit

USB Cable x 1pc

BRIK 12V Adaptor x 1pc

BRIK Disc x 1pc(included driver.)

BRIK User Manual.

Key Feature

DAC Support, playback resolution 32bit/384KHz

ADC recording resolution 24bit/384KHz

Support 2 Headphone Output with Volume Control

USB B type input x 1

Golden-Plated RCA Analog input x 1 (Recording)

Metal housing and Aluminum front panel of Silver or Black.

Miniature size of W 140 x H 48 x D 160 mm, 1,100g approx..

AP-32H ships with Windows & Mac drivers that have to be installed on your

computer.

NOTE: Mac OS DO NOT NEED TO INSTALL DRIVER.

An extension 12V power supply is included.

※ATTENTION※

1. Turn off AP-32H:

Please turn off the power button of AP-32H, instead of plugging out USB cable from

computer directly for protecting your PC.

2. Note for choosing recording software:

Please make sure recording software can support 384Khz sample rate with seller.

// INDEX//

Page Subject

02----------------------------------Technical Specification of BRIK AP-32H

02----------------------------------Front Panel Environment

03--------------------------------- Rear Panel Environment

03~06-----------------------------Install driver of AP-32H

07----------------------------------Uninstallation Guided Instruction

07~09-----------------------------Suggested software to execute Playback with AP-32H

09---------------------------------- Suggested software to execute Recording with AP-32H

Technical Specification BRIK AP-32H

BRIK AP-32H

Power Output 32ohm x 2 total 400mW

S/N 95dB

Distortion 0.02%

Load impedance 16~600 ohm

Frequency Response 20HZ~20KHZ

USB Interface USB 2.0 High/full Speed compliant

USB Audio Device Class Specification

v1.0/2.0 Compliant

Line input 1 Set RCA stereo input supported

Recording to PC

Headphone Analog

Output

sample rate support

44.1Khz, 48Khz, 88.2Khz, 96Khz,

176.4Khz, 192Khz, and 384Khz.

16, 24 bit & 32bit 2 Channel

Front Panel Environment

□

Volume Control for 2 headphone output.

□

On/Off Switch on front, power LED will glow when power on.

□

3.5mm headphone jack x 2 on front panel of AP-32H.

Rear Panel Environment

◇

12V Power supply, 2.1mm tip jack supply connector.

◇

PC Signal input, connect a 2.0 USB cable, B type USB connector.

◇

RCA stereo input supported recording to PC.

Please read this User Manual before operating the machine to ensure its best

performance and your safety.

Install driver of AP-32H

1. Please execute driver of AP-32H on the BRIK CD-ROM.

2. Installing process

Power on AP-32H and connect it to the PC, driver will start automatic installation as

following:

AP-32H Driver Installation based on a Windows-based PC

Open the driver folder and select “SETUP.EXE”, installation START.

(Pic.1)

Click “NEXT STEP” to proceed, as PIC.2

(PIC.2)

Check in the column. Click “Next” to move on installation, as PIC.3.

(PIC.3)

Message window states installation status and please click on “Next” for next

step. (PIC.4)

(PIC.4)

Please reboot PC and finish installation, PIC.5

(PIC.5)

After reboot, you can find icon of BRIK AP-32H(PIC.6) on Device Manager of the

PC, the installation is finished.

(PIC.6)

PLEASE NOTE: The Wizard Installation appearance may be slightly different

depends on XP/Vista and Windows 7 system environment.

**Uninstallation Guided Instruction:

Insert Driver Disk, power on AP-32H and connect to the PC Enter Control panel of

the PC Click on Programs(uninstall a program) Choose BRIK AP-32H and

execute uninstallation.

Suggested software to execute Playback with AP-32H.

-- FooBar 2000 (http://www.foobar2000.org/) , downloading and installing FooBar

Software, which can support many music formats and high sample rate.

-- Use FooBar with WASAPI under Windows SP1 Vsita or newer(e.g.Windows 7),

it needs to download DLL’s of WASAPI or ASIO output support from FooBar 2000

website.

Here are links for component of WASAPI Output support and ASIO output support:

WASAPI

http://www.foobar2000.org/components/view/foo_out_wasapi

ASIO

http://www.foobar2000.org/components/view/foo_out_asio

-- Please key in “.rar” or.”zip” behind when you’re saving component.

-- Please copy all files and paste it to FooBar2000 main folder in your hard disk.

(PIC.7 as WASAPI for example, you can use ASIO Output support as well)

-- And, restart FooBar and go for Preference Playback Output Window and

set parameter accordingly.

(PIC.8)

(PIC.9 As WASAPI for example, choose one of them (WASAPI PUSH or

Event,BRIK AP-32H) or choose ASIO:ASIO4ALL v2, below PIC.10)

(PIC.10)

Suggested software to execute Recording with AP-32H.

--Suggested Recording Software “Magix Samplitude Pro”

--Please execute Magix Samplitude Pro as PIC.11

(PIC.11)

-- Click “File” ->”Record” and there will be a window shown up as PIC.12

Other Brik Amplifier manuals

Brik

Brik Integrated Amplifier User manual

Popular Amplifier manuals by other brands

ASTRO

ASTRO HVO V40 P operating manual

Marantz

Marantz SUPERSCOPE BLA-545 Service data

NAD

NAD CI980 Quick setup guide

Technics

Technics SE-CH770 Service manual

Harman Kardon

Harman Kardon HK6300 instruction manual

NAD

NAD T975 owner's manual

McIntosh

McIntosh MA6850 Brochure & specs

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N manual

Viatron

Viatron Autrix Technical manual

GME

GME GA9800 instruction manual

Atlas

Atlas CP700 Specification sheet

Roland

Roland KC-1000 owner's manual

Pyle

Pyle PFMRA350BW user manual

Advantage

Advantage S-250 manual

IRT Electronics

IRT Electronics DVA-3007 manual

Dimavery

Dimavery BA-100 Series user manual

Sony

Sony XM-S400D operating instructions

Schertler

Schertler ROY X quick guide