Briggs & Stratton Victa User manual
Not for
Reproduction
WARNING! Read this manual before operating your VICTA trimmer.
Line Trimmer
Assembly and
Owner’s Manual
Not for
Reproduction
IMPORTANT NOTES
Please read the following
Thank you for purchasing your VICTA trimmer. VICTA prides itself in the quality and
performance of all its products.
This instruction manual will aid in the assembly, safe operation and maintenance of your
trimmer.
Please read the following warnings to ensure safety and the long life of your product.
Safety Markings and Symbols
Warning!
Always switch off the
machine and pull off the
spark plug boot
Read the directions
for use before
operating the machine.
Read the directions
before carrying out any
maintenance work.
Wear safety goggles,
a helmet and ear
protection.
Do not use rigid cutting
disk.
Wear sturdy, non-slip
footwear.
Do not use solid saw
edged blades.
Wear safety gloves.
All bystanders must be
kept at least 15 m from the
machine.
Protect the machine
from rain and damp.
Tool continues to run some
seconds after switching off
motor.
Be careful of objects
being thrown out!
CAUTION: Hot machine
parts. Keep your distance.
• Read the instructions carefully. Ensure you are familiar with all controls & safety
precautions outlined in this document before operating the machine.
• Stay alert and watch what you are doing when operating the machine. Do not operate
the trimmer under the influence of alcohol, drugs or medication or when you are tired
or sick.
• Operate the trimmer at reasonable hours only - not early in the morning or late at night
or when people might be disturbed. Check with your local council for operation times.
• Do not operate the trimmer indoors or in confined spaces.
• While the trimmer is running, always keep hands and feet away from the trimmer head.
(Keep away from any bystanders or animals when in use.)
• Use only manufacturer's genuine recommended replacement parts and accessories.
Not for
Reproduction
Table of Contents
NOTE – WARRANTY DETAILS ARE NOT WRITTEN WITHIN THIS OPERATOR’S
MANUAL. REFER TO OTHER DOCUMENTS SUPPLIED WITH THIS MACHINE
FOR WARRANTY DETAILS.
THE WARRANTY DOCUMENTS MAY INCLUDE TECHNICAL SPECIFICATIONS
THAT ARE SPECIFIC TO EACH MODEL THAT ARE NOT WRITTEN WITHIN THIS
OPERATOR’S MANUAL.
Quick Start
Quick Start 1
Features & Definitions
Features Definitions 2
Safety & Handling
Safety Instructions 4
Hazards 5
Personal Safety Equipment 6
Assembly Procedures
Handle Assembly 7
Carry Strap Assembly 7
Guard Assembly 7
Shaft Assembly 8
Trimmer Line Assembly 9
Cutting Head Assembly 12
Operating Instructions
Fuelling Procedures 13
Starting Instructions 14
Stopping Instructions 17
Trimming Tips 16
Maintenance & Care
Air Filter 17
Spark Plug 18
General Maintenance 18
Cleaning & Storage 18
Maintenance Chart 19
Troubleshooting
Troubleshooting 20
Not for
Reproduction
1
QUICK START
Quick Start Guide
• That there are no leaks in the fuel system
• That all screws are securely fastened
• Trimmer Bump Head, Guard and Coupling are secured safely and as
instructed.
Check the position & operation of controls to ensure you are
comfortable before you start using the machine.
Check all components are assembled as per assembly instructions on
page 7.
Quick Start Guide
• Place the trimmer on a hard, level surface.
• Press the PRIMER 10 times.
1 – Get ready…
PRIMER
1.
• Set STOP switch to the “ON” position (I)
• Set the choke lever to COLD
2 – Set
3 – Go!
• Slightly pull out the starter cord until you feel it
resist
• Then tug sharply on the starter cord 2 or 3 times.
• Tug sharply on the starter cord as before.
• 2 or 3 pulls should start your trimer.
Never allow the starter cord to snap back. This may damage the machine!
Repressing the throttle lever will release the throttle lock from the fixed
position.
1.
2.
3.
Check
Not for
Reproduction
2
FFBent Shaft Trimmer
1 Cast Trimmer Head
2 Shoulder Strap
3 Universal Handle
4 Trimmer Guard
5 3mmØ Nylon line 20pc
(Grey)
6 Spark Plug Wrench
7 Allen Key
8 Allen Key
9 Reversible Screw Driver
10 Hook, Shoulder Strap
11 Engine Stop Switch
12 Throttle Lever
13 Presence Release
14 Spark Plug Boot
15 Engine Shroud Cowling
16 Fuel Primer Pump
17 Starter Chord Lever
18 Choke Lever
19 Air Filter Housing Cover
20 Petrol Tank
21 Shaft Coupling
22 Trimmer Line - Bump
Head
23 Bent Lower Shaft
24 Upper Shaft
2
1
43
876
59
Do not operate the VICTA Trimmer
before reading all Safety &
Handling sections.
&%!452%3 $%&).)4)/.3
22
4
23
21
3
24
10
10 11 13
12
18
19
20
16
17
15
14
Not for
Reproduction
3
Do not operate the VICTA Trimmer
before reading all Safety &
Handling sections.
&%!452%3 $%&).)4)/.3
1 Cast Trimmer Head
2 Shoulder Strap
3 Universal Handle
4 Trimmer Guard
5 3mmØ Nylon line 20pc
(Grey)
6 Spark Plug Wrench
7 Allen Key
8 Allen Key
9 Reversible Screw Driver
10 Hook, Shoulder Strap
11 Engine Stop Switch
12 Throttle Lever
13 Presence Release
14 Spark Plug Boot
15 Engine Shroud Cowling
16 Fuel Primer Pump
17 Starter Chord Lever
18 Choke Lever
19 Air Filter Housing Cover
20 Petrol Tank
21 Shaft Coupling
22 Trimmer Line - Bump
Head
23 Straight Lower Shaft
24 Upper Shaft
25 Braket, Trimmer Guard
10 11 13
12
18
19
20
16
17
15
14
876
59
5
5
5
2
1
34
22 4
23
21 3
24
Straight Shaft Trimmer
25
Not for
Reproduction
4
Safety Instructions
Do not operate the VICTA Trimmer before reading all Instructions &
reading all Safety & Handling sections.
Operator Safety
• Wear the necessary safety equipment, as listed on page (6), in the Personal Safety
Equipment Section.
• Always wear heavy, long pants. Do not wear loose clothing, jewellery, short pants,
sandals or go barefoot. Secure hair so it is above shoulder length.
• Do not operate the unit if you are tired, ill or under the influence of alcohol, drugs or
medication.
Unit Safety
• The product is intended for garden maintenance trimming of organic ground covering
such as grass and lawn. The product must not be used for or modified for uses other
than is intended, unless approved by the manufacturer.
• Inspect the entire unit and cutting head before each use.
• Ensure that the guard is properly attached.
• Do not use the unit if it is running erratically. Have it serviced promptly.
• Keep handles free of oil and fuel.
• Learn how to stop the engine quickly in an emergency.
• Stop the engine when the unit is unattended. Never leave engine running while
unattended.
• Never allow children or unauthorised persons to operate the unit.
• Do not leave the unit on dry cuttings when it is Hot, as a risk of fire is present. Do not
cover muffler or restrict airflow to muffler..
Fuel Safety
• Use a container approved for fuel and a funnel to avoid spillage.
• Mix and pour fuel outdoors where there are no sparks or flames.
• Frequently check for fuel leaks.
• Do not smoke or allow smoking near fuel, or near the unit, or while using the unit.
• Add fuel before starting the unit.
• Never remove the fuel tank cap while the engine is running or hot, allow to cool
before refuelling.
• Never allow the unit to run out of fuel before refuelling.
• Move at least 3 metres away from the fuelling site before starting the engine.
• Wipe all traces of fuel on the unit before starting the engine.
• Change your clothes before starting the unit if fuel has been spilt on them.
Not for
Reproduction
5
Safety Instructions
Starting Safety
• Start the engine with feet well away from the cutting head.
• Ensure that the area of starting and operation is clear of sticks, stones, glass, nails,
wire, string and debris, which could be thrown by the cutting head.
Cutting Safety
• Use only in good visibility and favourable weather conditions.
• Keep children, animals and bystanders outside the 15 metre hazard zone. Stop the
engine immediately if approached.
• Keep the engine to the right of your body, holding the unit with both hands.
• Keep a firm footing and balance. Do not over reach.
• Keep the cutting head below waist level and do not raise the engine above your
shoulder. The cutting head can come dangerously close to your body.
• Keep your body away from the cutting head and muffler when the unit is running.
• Do not strike objects that may cause harm or damage to the unit.
Maintenance Safety
• Stop the engine and disconnect the spark plug before clearing blockages, checking
or working on the unit. Clean carbon from the muffler at exhaust outlet frequently.
• Stop the engine, disconnect the spark plug and inspect the unit if it begins to vibrate
abnormally or if it strikes a foreign object.
• Use only genuine VICTA trimmer line. Never use wire, rope, string, etc.
• Use only genuine VICTA replacement parts.
Transporting and Storage
• Hand carry the unit with the engine stopped and the muffler away from your body.
• Allow the engine to cool, empty the fuel tank and secure the unit before storing or
transporting in a vehicle.
• Empty the fuel tank after each use and before storing the unit.
• Store the unit and fuel well away from sparks or open flames from water heaters,
electric motors, switches or furnaces, etc.
• Store the unit out of reach of children and unauthorised persons.
Not for
Reproduction
6
Personal Safety Equipment
Always use the following safety equipment when working with your trimmer:
• A safety helmet fitted with a visor or suitable eye protection.
• A set of ear muffs.
• A pair of protective gloves.
• A pair of safety boots.
Safety Instructions
Hazards
The following safety precautions must be strictly observed to avoid the risk of damage or
personal injury.
Prior to using the unit, clear the operating area of objects which may
be thrown up by the cutting head, such as rocks, glass and other
debris.
Do not start or operate the unit inside a closed room or building.
Breathing exhaust fumes can kill.
Be careful when operating the unit on slippery ground or overgrown
terrain. Be attentive for concealed hazards, such as ditches, tree
stumps and roots.
Maintain solid footing and balance while operating the unit. Cut only
on ground level.
Never use the unit without the guard securely in place.
Do not touch the cutting head in motion. When handling blade for
assembly or maintenance tasks, always wear protective gloves.
Bystanders must be at least 15 metres away during operation of the
unit, as rocks and other materials may be thrown at high velocities.
Switch the unit off immediately if approached.
Keep body away from hot muffler parts.
Not for
Reproduction
10
Guard Assembly
ASSEMBLY PROCEDURES
Fig: 1 Fig: 3Fig: 2
Fitting the handle
1. Remove all the screws from the handle. (Fig.1)
2. Position brackets on Upper Shaft and secure scews.(Fig.2)
3. Position Top handle onto bracket and secure two screws. (Fig.3)
Handle Assembly
CAUTION! Not too loose or too tight. Over tightening may damage the unit.
Fig: 4 Fig: 5 Fig: 6
Fitting the bent shaft guard
1. Remove screw from guard using an Allen key (Fig 4).
2. Clip the guard to the lower bent shaft head spindle and ensure is seated in location (Fig 5).
3. Screw the guard hood tightly in position with the fastening screw (Fig 6).
Carry Strap Harness Assembly
Fitting the Carrying Strap Harness
• The strap is intended to help you work safely &
ergonomically with the machine.
• Hook the strap into the fastening eyelet.
• Slip the strap over the shoulder.
• Set the length of the shoulder strap in such a
way that the trimmer head runs parallel to the ground.
In order to establish the optimum length of the strap, you
should then make a few swinging movements to check
operating comfort before starting the engine.
7CAUTION! Do not use the trimmer without the guard.
Other manuals for Victa
2
Table of contents
Other Briggs & Stratton Trimmer manuals
