Bridge BriPower ESA Series User manual

BriPower

ESA Series User Manual

INFO & CONTACT ADDRESSES

Bridge Technology is a company focusing on business of power supplies and test systems for

new energy applications. We are devoted to providing high quality products and solutions for

customers.

Bridge Technology has a top-class R&D team in China, workstation on modularization and

standardization power supplies and systems. We have sales, technical support, R&D and

manufacture in Shanghai, Nanjing, and Chengdu.

Nanjing Bridge New Energy Technology was founded on Jan 12th, 2016, focusing on R&D and

manufacturing BriPower brand power systems, including bi-directional AC sources for grid

simulation, bi-directional DC sources for battery simulation, and regenerative loads. The

BriPower AC&DC power systems are widely used in new energy and related fields.

•

Nanjing Bridge New Energy Technology Co., Ltd

Sabo Industrial Park, Runhuai Road, Zhetang Street, Lishui District, Nanjing, Jiangsu

General information: info@bridgetech.cn

Technical Support: support@bridgetech.cn

Repair &Calibration: service@bridgetech.cn

Int'l Sales: contact@bridgetech.com.sg

Tel: +86 25-86168994 (Nanjing)

• Shanghai Bridge Electronic Technology Co., Ltd

412, Building A, No.90 Wanrongyi Road, Jing’an District, Shanghai, 200436

Tel：+86 21-62220238 (Shanghai)

Legal Notices

Without the written permission and consent of Bridge Technology, No part of this manual may

be used, copied, translated, modified, or transmitted in any form. All the information,

instructions and illustrations provided in this manual are the latest version currently. This

manual is based on the technical status at the time of printing. Bridge Technology will make

every effort to ensure that the information in this manual is up-to-date and accurate. It will be

modified without notice. Although there are regular controls and corrections, there may still

be typographical errors or defects. Bridge Technology has no liability for any technical,

typographical or translation errors in this manual. If any errors are found, please report them

to us in writing.

The pictures used in this manual do not represent the pictures of the products purchased by

the user. The actual products purchased by the user may be customized versions, which may

not match the manual in terms of appearance, weight, and technical parameters. For specific

understanding of the actual appearance and technical parameters of related products, please

contact Bridge Technology.

Software Statement

ESA series provides GUI software, which is installed on the TFT-Touch panel using the Windows

OS. Unless interoperability requires by law, it is prohibited to reverse program, disassemble,

or decompile the software.

Date and Reversion

Date Version Reversion record

Oct, 2020 Revision 1.0 Complete the manual

Safety Requirements

Summary of safety requirements

Please read the manual thoroughly before putting the equipment into operation. Pay regard

to the following safety instructions and keep the manual nearby for future purpose to avoid

any damage to the equipment. To prevent potential hazards, please follow the instructions in

the manual to safely use the instrument. Bridge Technology have no liability for failures caused

by violate protective measures or other safety regulations.

•

Unpacking

Please make sure that the shipping carton and the packing is without any damage. If any

external damage is found, it is important to record the type of damage. Please keep the original

packing to ensure the product is adequately protected in case it needs to be transported to

the factory or make a claim.

•

Surroundings

To avoid electrical hazards or product failure, the equipment should be installed indoor which

meets the environment requirements.

•

Operator

The equipment operator must follow the warnings, safety instructions and accident

prevention measures in the manual.

•

Visual Inspection

After unpacking, please immediately check whether there is any defects or damage of the

equipment during transportation. If there is obvious physical damage, please do not use the

equipment. Please notify the carrier and the agent of Bridge Technology immediately.

•

Power Operation

Please confirm the model and voltage / current rating on the nameplate before operating.

Damage caused by wrong power supply is not covered by the warranty.

•

Use Suitable Cables

Please select the appropriate cable according to the equipment specifications of the local

country.

•

Equipment Groundin

The equipment is grounded through the protective ground bus. To avoid electrical hazards,

connect the ground terminal to the protective ground terminal before connecting any input

or output terminals.

•

Appropriate Overvoltage Protection

Make sure that there is no overvoltage on the product (such as overvoltage caused by

lightning). Otherwise, the operator may be in danger of electrical hazards.

•

Avoid Exposing Circuits or Wires

When the module is powered on, do not touch the exposed connectors or components.

Safety Notices and Symbols

Safety Symbols

SHOCK HAZARD WARNING PROTECTIVE EARTH

TERMAINAL

Other Symbols

IMPORTANT INFORMATION

Safety Information

WARNING

If improperly operated, it may cause injury or danger immediately.

WARNING

Potentially dangerous situation or practice. If not avoided, it

will result in serious

injury or death.

CAUTIOUS

Potentially dangerous situation or practice. If not avoided, may result in product

damage or loss of important data.

SHOCK HAZARD

Danger, caution or warning caused by electricity. To avoid the risk of electric

shock, the power supply must be firmly connected to the ground wire and other

equipment wiring. Within a few seconds after the power supply is

off, the high

voltage at the output terminal may be maintained. Do not

touch the cable or

terminal block immediately.

IMPORTANT INFORMATION

Important information when operating the equipment/software.

Content

Safety Requirements ................................................................................................................. 4

Part I Equipment Introduction................................................................................................. 10

1.1 System Overview ..................................................................................................... 11

1.1.1 Overview of ESA series .................................................................................... 11

1.1.2 Model Description ........................................................................................... 11

1.1.3 Features and configuration ............................................................................. 11

1.1.4 General Specification ...................................................................................... 12

1.2 Appearance and structure of Equipment ................................................................ 14

1.2.1 Appearance and outline .................................................................................. 14

1.2.2 Front Panel ...................................................................................................... 14

1.2.3 Rear panel ....................................................................................................... 16

1.2.4 Internal structure ............................................................................................ 17

1.2.5 Front panel of control module ........................................................................ 17

1.2.6 Connection layer and other interface layers ................................................... 18

1.3 Interface Description ............................................................................................... 20

1.3.1 LAN interface（standard） ............................................................................. 20

1.3.2 RS485 nterface (standard) ............................................................................... 21

1.3.3 RS232 interface (-232 option) ......................................................................... 22

1.3.4 TTL interface (standard) .................................................................................. 24

1.3.5 ATI Interface (-ATI option) ............................................................................... 25

1.3.6 External emergency stop interface (standard) ................................................ 26

1.3.7 Remote sense interface (standard) ................................................................. 27

1.3.8 Master-slave interface（-MS option） ........................................................... 29

Part II Equipment Installation .................................................................................................. 32

2.1 Check before Installation ......................................................................................... 33

2.1.1 Check the packing ........................................................................................... 33

2.1.2 Check the equipment ...................................................................................... 33

2.2 Equipment Installation ............................................................................................ 34

2.2.1 Selection of input/output cables ..................................................................... 34

2.2.2 Installation steps ............................................................................................. 34

2.2.3 Add single-phase output (-1P option) ............................................................. 36

2.3 Parallel installation of equipment ........................................................................... 37

Part III Power-on Operation ...................................................................................................... 40

3.1 Power-on Operation ................................................................................................ 41

3.2 GUI Software Operation (Local Control).................................................................. 43

3.3 GUI Software Operation(Remote Control） ........................................................... 45

3.4 Power off Operation ................................................................................................ 46

Part IV Function and Feature Introduction................................................................................ 48

4.1 Grid Simulation Function......................................................................................... 49

4.2 Re-generative AC Load (-LD option) ........................................................................ 52

4.3 Extends to DC output (-DC option) .......................................................................... 53

4.4 Line impedance (RL) Simulation (-IMP option) ....................................................... 53

Part V Software Interface ................................................................................................... 54

5.1 GUI Software Introduction ...................................................................................... 56

5.1.1 Operating status .............................................................................................. 56

5.1.2 Sequence mode ............................................................................................... 57

5.1.3 Input/output controls ...................................................................................... 58

5.2 Communication Setting ........................................................................................... 60

5.3 Hardware Limits ...................................................................................................... 62

5.4 Sequence ................................................................................................................. 64

5.5 Analog Input ............................................................................................................ 66

5.6 AC/AC+DC/DC .......................................................................................................... 67

5.6.1 AC .................................................................................................................... 67

5.6.2 AC+DC .............................................................................................................. 68

5.6.3 DC (-DC option) ............................................................................................... 69

5.7 Harmonic and inter-harmonic simulation ............................................................... 70

5.7.1 Harmonic simulation ....................................................................................... 70

5.7.2 Inter-harmonic simulation ............................................................................... 71

5.8 Simulation of Re-generative AC Load ...................................................................... 73

5.8.1 CR mode .......................................................................................................... 73

5.8.2 Rectifier mode ................................................................................................. 74

5.8.3 CC/CP phase lead/lag mode ............................................................................ 75

5.9 Measurements ........................................................................................................ 76

5.10 Waveform ................................................................................................................ 77

5.10.1 Real-time waveform browsing ........................................................................ 77

5.10.2 Historical waveform browsing ......................................................................... 78

5.11 System Status .......................................................................................................... 80

5.12 Administrator Account ............................................................................................ 81

Part VI Equipment verification and calibration ................................................................... 82

6.1 Performance Verification ........................................................................................ 83

6.1 1 Verity equipment and settings ............................................................................... 83

6.1.2 Verity content .................................................................................................. 85

6.2 Test Record Form ............................................................................................................... 91

Part VII Equipment Maintenance and Repair..................................................................... 92

7.1 Equipment Maintenance ................................................................................................... 93

7.1.1 Equipment operating environment ................................................................. 93

7.1.2 Equipment maintenance ................................................................................. 93

7.2 Equipment Repair .................................................................................................... 94

7.2.1 Equipment self-test ................................................................................................ 94

7.2.2 Maintenance service .............................................................................................. 94

7.2.3 Equipment returns .......................................................................................... 94

Part VIII Programming ........................................................................................................... 95

8.1 Command Format ................................................................................................... 96

8.1.1 Parameters data type ...................................................................................... 96

8.1.2 Command parameters/Return valve units ...................................................... 96

8.1.3 Command format ............................................................................................ 96

8.2 Command Sets ........................................................................................................ 97

8.2.1 Common commands ....................................................................................... 97

8.2.2 SCPI and panel comparison ........................................................................... 101

8.3 Example ................................................................................................................. 110

Part I Equipment Introduction

1.1 System Overview

1.1.1 Overview of ESA series

1.1.2 Model description

1.1.3 Features and configuration

1.1.4 General specification

1.2 Appearance and Structure of Equipment

1.2.1 Appearance and outline

1.2.2 Front panel

1.2.3 Rear panel

1.2.4 Internal structure

1.2.5 Control module of front panel

1.2.6 Connection layer and other interface layers

1.3 Interface Description

1.3.1 LAN interface (standard)

1.3.2 RS485 interface (standard)

1.3.3 RS232 interface (232 option）

1.3.4 TTL interface (standard）

1.3.5 ATI Interface (-ATI option)

1.3.6 External emergency stop interface (standard）

1.3.7 Remote sense (standard)

1.3.8 Master-Slave interface (-MS option)

Other manuals for BriPower ESA Series

Table of contents

Other Bridge Power Supply manuals

Bridge

Bridge BriPower ESA Series User manual

Popular Power Supply manuals by other brands

Monacor

Monacor PS-12CCD instruction manual

VOLTIMA

VOLTIMA MagicBox 15 Installation and operating instructions

Agilent Technologies

Agilent Technologies 6032A Service manual

Miller

Miller Auto Deltaweld 452 owner's manual

BCP

BCP PUOUBK How to install

HC 2210 manual

Puls

Puls CT5.241 installation manual

OCZ

OCZ ZX1250W Technical specifications

iseg

iseg ECH 238 manual

Power

Power XXL A Series instruction manual

Agilent Technologies

Agilent Technologies 6631B Service manual

Renogy

Renogy PHOENIX 300 user guide

HP 6200B Operating and service manual

Epson

Epson Stylus Scan 2500 Product information sheet

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 manual

Puls

Puls MiniLine ML50.100 instruction manual

Puls

Puls AS-Interface SLA4.100 installation manual

Kenwood

Kenwood PS-60 instruction manual