Brent 1082 User manual

Grain Handling

CORNER AUGER GRAIN CART

MODELS 1082 & 882

Model 1082 = Serial Number B31220100 & Higher

Model 882 = Serial Number B31240100 & Higher

Part No. 281900

Brent 1082/882 — Introduction

Foreward

This symbol identiﬁes important safety messages. When you see it, read the message

that follows and be alert to the possibility of personal injury.

Remember, safety instructions stated in this manual are for your protection. Read them care-

fully and follow them closely when working around or using this machine.

Read and study this manual completely before attempting to operate this implement. Take this

manual to the ﬁeld for handy reference when operating, adjusting, or servicing your machine.

When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined

by standing behind the machine and facing in the direction of travel.

(November 2014)

Brent 1082/882 — Introduction

• The information, specifications, and illustrations in the manual are based on information available

at the time it was written. Due to continuing improvements in the design and manufacture of

Unverferth products, all specifications and information contained herein are subject to change

without notice.

Product Information

When ordering parts or when requesting further information or assistance, always give the

following information:

• Machine name

• Model number

• Serial number

All products manufactured by Unverferth Mfg. Co., Inc. are warranted to be free from ma-

terial and workmanship

defects for one full year from time of consumer delivery. Your local

dealer will gladly assist you with any warranty questions.

Please ﬁll out and retain this portion for your records. The serial number plate is located

on the frame as shown below.

Purchase Date _____________Model _________________Serial No._______________________________

Dealer ____________________________________ City ____________________________________________

Dealer Contact _______________________________ Phone ______________________________________

Serial Number Location

(December 2012)

Brent 1082/882 — Introduction

Table of Contents

Section I

Safety

General Hazard Information ............................................................................................................ 1-2

Safety Decals .................................................................................................................................. 1-3

Following Safety Instructions .......................................................................................................... 1-5

Before Operating or Servicing ........................................................................................................ 1-6

During Operation ............................................................................................................................. 1-6

Before Transporting ......................................................................................................................... 1-7

During Transport.............................................................................................................................. 1-7

Drive Line Safety ............................................................................................................................ 1-8

Pressurized Oil ................................................................................................................................ 1-9

Preparing for Emergencies.............................................................................................................. 1-10

Wearing Protective Equipment ........................................................................................................ 1-10

(July 2015)

Brent 1082/882 — Introduction

5(July 2015)

Table of Contents

Section II

Set Up

Basic Cart Set Up - Folding Side Extension ................................................................................. 2-3

Basic Cart Set Up - SMV Emblem ................................................................................................ 2-4

Basic Cart Set Up - Auger Rest Retainer Removal ...................................................................... 2-4

Basic Cart Set Up - Lamp Set Up................................................................................................ 2-5

Basic Cart Set Up - Drive Line Storage ....................................................................................... 2-5

Basic Cart Set Up - Wheel/Tire Set Up ........................................................................................ 2-6

Basic Cart Set Up - Adjustable Axle (Optional)............................................................................. 2-7

Basic Cart Set Up - Adjustable Axle from Heavy to Light Setting .............................................. 2-8

Optional Tarp Installation - End Caps & Bows.............................................................................. 2-10

Optional Tarp Installation - Cables, Tarp, Tubes ............................................................................ 2-13

Optional Tarp Installation - Hand Crank ........................................................................................ 2-16

FOR TRACK INFORMATION, PLEASE REFER TO YOUR TRACK MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

FOR HYDRAULIC DRIVE INFORMATION, PLEASE REFER TO YOUR HYDRAULIC DRIVE MANUAL.

Brent 1082/882 — Introduction

Table of Contents

Section III

Operation

Operating Checklist ......................................................................................................................... 3-2

Preparing Tractor............................................................................................................................. 3-3

Preparing Cart - Hardware............................................................................................................. 3-3

Preparing Cart - Pivot Pins............................................................................................................ 3-3

Preparing Cart - Hitch.................................................................................................................... 3-3

Preparing Cart - Auger................................................................................................................... 3-3

Preparing Cart - Soft Start System ............................................................................................... 3-4

Preparing Cart - Hydraulic System ................................................................................................ 3-4

Preparing Cart - Tires/Wheels ........................................................................................................ 3-4

Lubrication....................................................................................................................................... 3-4

Hitching to Tractor - Drawbar Connection ..................................................................................... 3-5

Hitching to Tractor - Jack Usage .................................................................................................. 3-5

Hitching to Tractor - Transport Chain Connection ......................................................................... 3-6

Hitching to Tractor - Hydraulic Connections .................................................................................. 3-6

Hitching to Tractor - Hydraulic Connections for Hydraulic Drive .................................................. 3-7

Hitching to Tractor - Electrical Connections .................................................................................. 3-8

Towing............................................................................................................................................. 3-9

Auger Operation - PTO-Driven Auger............................................................................................. 3-10

Optional Equipment - Hydraulic Drive............................................................................................ 3-11

Weather Guard Tarp........................................................................................................................ 3-13

FOR TRACK INFORMATION, PLEASE REFER TO YOUR TRACK MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

FOR HYDRAULIC DRIVE INFORMATION, PLEASE REFER TO YOUR HYDRAULIC DRIVE MANUAL.

FOR UM520 AUTO DOOR OPERATING INFORMATION, PLEASE REFER TO YOUR

UM520 SCALE INDICATOR OPERATOR’S MANUAL.

(July 2015)

Brent 1082/882 — Introduction

Table of Contents

Section IV

Maintenance

Lubrication....................................................................................................................................... 4-2

Gearbox Lubrication ........................................................................................................................ 4-3

Seasonal Storage ............................................................................................................................ 4-3

Auger System - Lower Auger Disassembly ................................................................................... 4-4

Auger System - Lower Auger Assembly ........................................................................................ 4-5

Auger System - Upper Auger Disassembly.................................................................................... 4-7

Auger System - Upper Auger Assembly ........................................................................................ 4-8

Auger System - Auger Flow Door Cylinder Replacement.............................................................. 4-9

Verify Telescoping PTO Shaft Length ............................................................................................. 4-12

PTO Shaft and Clutch..................................................................................................................... 4-14

PTO Quick Disconnect .................................................................................................................... 4-18

Tarp Troubleshooting Inspection & Maintenance ............................................................................ 4-21

Electrical System Schematic........................................................................................................... 4-22

Hydraulic System Schematic........................................................................................................... 4-23

UM520 Auto Unload Manifold Schematic ....................................................................................... 4-24

Wheels and Tires - Wheel Nut Torque .......................................................................................... 4-25

Wheels and Tires - Tire Pressure.................................................................................................. 4-26

Wheels and Tires - Tire Warranty.................................................................................................. 4-27

Torque Chart - Hardware ............................................................................................................... 4-28

Torque Chart - Hydraulic Fittings................................................................................................... 4-30

FOR TRACK INFORMATION, PLEASE REFER TO YOUR TRACK MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

FOR HYDRAULIC DRIVE INFORMATION, PLEASE REFER TO YOUR HYDRAULIC DRIVE MANUAL.

(July 2015)

Brent 1082/882 — Introduction

Table of Contents

Section V

Parts

Final Assembly ........................................................................................................................... 5-2

Touch-Up Paint........................................................................................................................... 5-3

Rigid Axle................................................................................................................................... 5-4

Adjustable Axle........................................................................................................................... 5-5

Axle Mounting (Wheels) - with 3 Point Scale.......................................................................... 5-6

Track Axle Mounting - Model 1082 with 3 Point Scale

Serial Number B31220099 and Lower ............................................................................... 5-7

Track Axle Components - Model 1082 - with 5 Point Scale System

Serial Number B31220100 and Higher............................................................................... 5-8

Hub, Single Wheels.................................................................................................................. 5-10

Hubs, Duals.............................................................................................................................. 5-11

Wheels & Tires ........................................................................................................................ 5-12

Dual Wheels ............................................................................................................................. 5-15

Decals ...................................................................................................................................... 5-16

Sideboards - Model 882 ......................................................................................................... 5-18

Sideboards - Model 1082 ....................................................................................................... 5-19

Electrical................................................................................................................................... 5-20

Drive Components.................................................................................................................... 5-22

Auger Components................................................................................................................... 5-24

Auger Fold Indicator ................................................................................................................ 5-27

Cleanout Door Assembly .......................................................................................................... 5-28

Flow Door Seals ...................................................................................................................... 5-29

Cylinders................................................................................................................................... 5-30

Hydraulics................................................................................................................................. 5-32

Directional Spout...................................................................................................................... 5-34

PTO Assembly Shear-Bolt Clutch............................................................................................. 5-36

PTO Assembly Friction Clutch.................................................................................................. 5-38

Friction Clutch.......................................................................................................................... 5-39

Shear-Bolt Clutch ..................................................................................................................... 5-40

45 Degree Gear Box ............................................................................................................... 5-41

Driveline U-Joint Assembly ...................................................................................................... 5-42

Optional Weather Guard Tarp................................................................................................... 5-44

Video System Option ............................................................................................................... 5-46

FOR TRACK INFORMATION, PLEASE REFER TO YOUR TRACK MANUAL.

FOR SCALE INFORMATION, PLEASE REFER TO YOUR SCALE MANUAL.

FOR HYDRAULIC DRIVE INFORMATION, PLEASE REFER TO YOUR HYDRAULIC DRIVE MANUAL.

(July 2015)

Brent 1082/882 — Safety

1-1