BRAYER BR4201 User manual
Instruction manual
Инструкция по эксплуатации
Vacuum cleaner BR4201
Пылесос BR4201
brayer.pro
СОДЕРЖАНИЕ
EN......................................................................................................................................3
DE....................................................................................................................................12
RU ...................................................................................................................................22
KZ....................................................................................................................................32
3
EN
EN
VACUUM CLEANER BR4201
The vacuum cleaner is intended for dry cleaning of
rooms.
DESCRIPTION
1. Power cord
2. Power cord winding button
3. Outlet lter grid
4. Outlet HEPA lter
5. Suction power control
6. Carrying handle
7. Brush storage
8. Vacuum cleaner on/o button
9. Dust bin lock button
10. Dust bin upper lid clamp
11. Filter block
12. Dust bin lower lid clamp
13. Dust bin
14. Universal crevice nozzle
15. Floor/carpet brush
16. «FLOOR/CARPET» switch
17. Telescopic pipe clamp
18. Telescopic extension pipe
19. Flexible hose
20. Flexible hose handle
21. Manual suction power control
22. Ending clamp
23. Flexible hose ending
24. Air inlet
25. Dust bin lower lid
26. Separator ring
27. Separator
4 EN
1
2
3
4
5
106 97 8
11
11
12
13
14 15 16 17 18 19
20
21
22
23
24
10
12
13
25
26
27
5EN
Рiс. 1 Рiс. 2 Рiс. 3
Рiс. 4 Рiс. 5 Рiс. 6 Рiс. 7
Рiс. 8 Рiс. 9 Рiс. 10 Рiс. 11
6 EN
Рiс. 20
Рiс. 12 Рiс. 13 Рiс. 14
Рiс. 15 Рiс. 16 Рiс. 17
Рiс. 21 Рiс. 22
Рiс. 18
7
EN
SAFETY MEASURES AND OPERATION
RECOMMENDATIONS
Read the operation manual carefully before using
the vacuum cleaner; after reading, keep it for future
reference.
• Use the unit for its intended purpose only, as it is stated
in this manual.
• Mishandling the unit can lead to its breakage and cause
harm to the user or damage to the user’s property,
which is not covered by warranty.
• Make sure that the operating voltage of the unit
indicated on the label corresponds to your home mains
voltage.
• To avoid re, do not use plug adapters for connecting
the vacuum cleaner to the mains.
• Do not touch the vacuum cleaner body, the power cord
and the power plug with wet hands.
• Do not use the vacuum cleaner if the dust bin is not
installed or installed improperly, or if the inlet and outlet
lters are not installed.
• Use only the parts and attachments supplied with the
unit.
• Never leave the unit connected to the mains
unattended.
• Do not use the vacuum cleaner outdoors.
• It is not recommended to use the unit during lightning
storms.
• Protect the unit from impacts, falling, vibrations and
other mechanical stress.
• Do not use the unit near heating appliances, heat
sources or open ame.
• Do not use the vacuum cleaner in places where
aerosols are used or sprayed, and in proximity to highly
inammable liquids; do not use the vacuum cleaner in
the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting water
or other liquids.
• Do not use the vacuum cleaner for collecting burning or
smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, our or ashes.
• Do not use the vacuum cleaner to clean your pets’ fur.
• Keep free hanging clothes, hair and other parts of
your body away from the air inlets of the brush or the
attachments while room cleaning.
• Do not cover the inlets and outlets of the vacuum
cleaner with any foreign objects. Do not switch the
vacuum cleaner on if any of its openings is blocked.
• Do not run over the power cord with the vacuum
cleaner while room cleaning to avoid damaging it.
• Do not use the power cord as a handle for carrying the
vacuum cleaner; carry it by the handle.
• Regularly clean the dust bin and the lters of the
vacuum cleaner.
• After you nish using the vacuum cleaner or before
cleaning it, switch the unit o with the on/o button and
unplug it.
• When unplugging the vacuum cleaner, hold the power
8
EN
plug and carefully remove it from the mains socket,
do not pull the power cord, as this can lead to its
damage and cause a short circuit.
• For children safety reasons do not leave polyethylene
bags used as a packaging unattended.
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself; if any malfunction
is detected, and after the unit has been dropped,
unplug it and apply to the service center.
• To avoid damage, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Turn the vacuum cleaner upside down and remove
the transport parts (pic. 1).
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
• Make sure that the given specications of supply
voltage of the unit correspond to the specications of
your mains.
Attention! Do not allow children to play with
polyethylene bags or packaging lm. Danger of
suocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
for their safety or if they are not instructed by this
person on the usage of the unit.
• From time to time check the power cord insulation.
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or
similar qualied personnel to avoid danger.
9
EN
USING THE ATTACHMENTS
Floor/carpet brush (15)
When using the brush (15) set the switch (16) to the
necessary «FLOOR/CARPET» position (pic. 2).
Combined crevice nozzle (14)
The combined crevice nozzle (14) can be used for
cleaning radiators, crevices or spaces between
cushions, as well as for collecting dust from furniture
surface. The pile on the brush prevents damage of
polished furniture surfaces. While cleaning, set the
brush to the required position.
ASSEMBLING THE VACUUM CLEANER
Attaching and removing the exible hose (19)
• Insert the exible hose (29) ending (23) into the air
inlet (24) until the locks (22) catch.
• To remove the exible hose (29), press the locks (22)
and detach the ending (23) from the air inlet (24)
(pic.3).
Attaching the telescopic pipe (18) and the
attachments
• Attach the telescopic extension pipe (18) to the
exible hose handle (20) (pic. 4).
• Extend the lower part of the telescopic extension
pipe (18) to the required length, having preliminarily
pressed the lock (17) (pic. 5).
• Choose the necessary attachment: oor/carpet brush
(15), combined crevice nozzle (14) and attach it to
the telescopic extension pipe (18).
• You can attach the combined crevice nozzle (14) to
the exible hose handle (20).
ATTENTION!
• Do not use the vacuum cleaner in places where
aerosols are used or sprayed and in proximity to
highly inammable liquids, do not use the vacuum
cleaner in the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting
water or any other liquids; do not use it for collecting
burning or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, our or ashes.
• Take sharp objects away from the oor before
cleaning to prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it o immediately,
unplug it and check the telescopic pipe (18) or
the exible hose 19) for obstruction. Remove the
obstruction, after that you can resume cleaning.
USING THE VACUUM CLEANER
The dust bin (13) is equipped with the cyclonic lter (27)
which sieves out garbage and dust from the ingoing air,
and the inlet HEPA (11) lter fully retains the nest dust
particles.
10
EN
Note: provide that the HEPA lter (11) is always clean,
because the overall performance of the vacuum cleaner
depends on it.
Attention!
Before switching on and using the vacuum cleaner,
make sure that the HEPA lter (11), the separator (27),
the dust bin (13) and the outlet lter (4) are installed
properly.
• Take the power plug (1) and unwind the power cord
to the required length, connect the power plug to the
mains socket (pic. 7).
• The yellow mark on the power cord indicates the
maximum cord length. Do not pull out the power cord
further than the red mark.
• Press the on/o button (8) to switch the vacuum
cleaner on (pic 8).
• While cleaning, you can control the suction power
using the manual suction power control (21) on the
exible hose handle (19) (pic. 9).
• After you nish cleaning, switch the vacuum cleaner
o by pressing the on/o button (8) and unplug it.
• To wind the power cord, press the button (2); keep a
hold of the winding cord with your hand.
• If you have to make a break during the cleaning,
switch the vacuum cleaner o by pressing the button
(8) and install the brush (15) to the brush storage (7)
(pic. 10).
ATTENTION!
Before changing the attachments or cleaning the
dust bin (13), switch the vacuum cleaner o by
pressing the on/o button (8) and unplug it.
CLEANING AND MAINTENANCE
Cleaning the dust bin (13)
• It is recommended to remove garbage and dust from
the dust bin (13) after every room cleaning.
• Switch the vacuum cleaner o by pressing the on/o
button (8) and unplug it.
• Holding the handle (13), press the lock (9) and
remove the dust bin (13) (pic.11).
• Place the dust bin (13) over a garbage bin.
• Pull the lock (12) and open the lower lid (25) (pic.
12).
• Remove accumulated dust and garbage from dust
bin (13).
• Close the lid (25).
• Install the dust bin (13) back to its place and make
sure that the dust bin (13) is xed properly.
Cleaning the HEPA lter (11) and the separator (27)
installed in the dust bin (1)
• Clean the lter block (11) at least once a month.
• Preliminarily remove dust and garbage from the dust
bin (13) as described above.
• Pull the upper lid clamp (10) and open the lid
(pic.13).
Table of contents
Languages:
Other BRAYER Vacuum Cleaner manuals
BRAYER
BRAYER BR4221 User manual
BRAYER
BRAYER BR4262 User manual
BRAYER
BRAYER BR4225 User manual
BRAYER
BRAYER BR4204 User manual
BRAYER
BRAYER BR4208 User manual
BRAYER
BRAYER BR4266 User manual
BRAYER
BRAYER BR4223 User manual
BRAYER
BRAYER BR4260 User manual
BRAYER
BRAYER BR4200 User manual
BRAYER
BRAYER BR4203 User manual
BRAYER
BRAYER BR4205 User manual
BRAYER
BRAYER BR4222 User manual
BRAYER
BRAYER BR4209 User manual
BRAYER
BRAYER BR4267 User manual
BRAYER
BRAYER BR4264 User manual
BRAYER
BRAYER BR4202 User manual
BRAYER
BRAYER BR4265 User manual
BRAYER
BRAYER BR4263 User manual
BRAYER
BRAYER BR4262 User manual
BRAYER
BRAYER BR4261 User manual
