Bravo BV301H User manual

Range hoods

BV301H

BV302H

BV303H

BV361H

BV362H

User Manual Instructions

Installation Instructions

BV301H/361H BV302H/362H BV303H

Fig.1

Fig.2 Fig.3

Fig.4 Fig.5

Fig.6 Fig.7

Fig.8 Fig.9

Fig.10 Fig.11

Fig.12 Fig.13

Fig.14

Fig.15 Fig.16

Fig.17 Fig.18

Fig.19

Fig.20

GENERAL

Carefully read the following important information regarding installation

safety and maintenance. Keep this information booklet accessible for further

consultations. The appliance has been designed for use in the ducting

version (air exhaust to the outside – Fig.1B), filtering version (air circulation

on the inside – Fig.1A) or with external motor (Fig.1C).

SAFETY PRECAUTION

1. Please take note that when the cooker hood is operating simultaneously

with an open fireplace or burner that depend on the air in the environment,

the cooker hood may removes the air from the environment which a burner

or fireplace need for combustion. The negative pressure in the environment

must not exceed 4Pa (4x10-5 bar). Provide adequate ventilation in the

environment for a safe operation of the cooker hood. Follow the local laws

applicable for external air evacuation.

Before connecting the model to the electricity network:

- control the data plate (positioned inside the appliance) to ascertain that the

voltage and power correspond to the network and the socket is suitable. If in

doubt please ask qualified electrician for help.

2. WARNING!

In certain circumstances electrical appliances may be a danger hazard.

A) Do not check the status of the filters while the cooker hood is operating

B) Do not touch bulbs or adjacent areas, after prolonged use of the lighting

installation.

C) Flambe cooking is prohibited underneath the cooker hood

D) Avoid free flame, as it is damaging the filters and can cause fire hazard

E) Constantly check food frying, the overheated oil may become a fire

hazard

F) Disconnect the electrical plug prior to any maintenance.

G) There shall be adequate ventilation in the room when the range hood is

operating

H) There is a risk of fire if cleaning is not carried out in accordance with the

instructions

I) If the supply cord is damaged, it must be replaced by the manufacturer , its

service agent or similarly qualified person s in order to avoid a hazard.

J) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

K) Children should be supervised to ensure that they do not play with the

appliance.

L) The air must not be discharged into a flue that is used for exhausting

fumes from appliances burning gas or other fuels

M) The minimum distance between the supporting surface for the cooking

vessels on the hob and the lowest part of the range hood shall be at least

65cm. The instructions for installation of the gas hob specify a greater

distance has to be taken into account if requirement stated

N) Regulation concerning the discharge of air has to be fulfilled.

O) The hoods can be applicable for 6 burners cooking together max.

INSTALLATION INSTRUCTIONS

Assembly and electrical connections must be carried out by specialized

personnel.

• Electric Connection

The appliance has been manufactured as class I, therefore earth cable is

necessary.

The connection to the mains is carried out as follows:

If the plug is not provided, connect the electrical load as indicated on the

description label. When a plug is provided, the cooker hood must be

installed in order that the plug is easy to access.

An omnipolar switch with a minimum aperture of 3mm between contacts; in

line with the electrical load and local standards, must be placed between the

appliance and the network in the case of direct connection to the electrical

network.

IEC227

North America

L=live

Brown

Black

N=neutral

Blue

White

E=earth

Green/Yellow

Green

• The minimum distance between the support surfaces of the cooking pots on

the cooker top and the lowest part of the cooker hood must be at least 65 cm.

If a connection tube composed of two parts is used, the upper part must be

placed outside the lower part.

Do not connect the cooker hood exhaust to the same conductor used to

circulate hot air or for evacuating fumes from other appliances generated by

other than an electrical source.

Before proceeding with the assembly operations, remove the anti-grease

filter(s) (Fig.5) so that the unit is easier to handle.

In the case of assembly the appliance, in the suction version prepare the hole

for evacuation of the air.

• FIXING TO THE WALL

Preparing the installation

Caution!

Ensure that there are no electric wires, gas or water pipes in the area

where holes are to be made.

1. Mark a vertical centre line on the wall from the ceiling to the lower edge

of the extractor hood.

2. Mark positions for the screws and the contour of the attachment area.

3. Drill five 8 mm diameter holes to a depth of 50 mm for the attachments

and press in the wall plugs flush with the wall.

Installation

1. Screw on the fixing bracket for the flue duct.

2. Screw on brackets for the extractor hood hand-tight. Do not firmly

tighten the screws.

Attaching and aligning the appliance

1. First, remove the mounting bracket, screw on the machine.

2. When attaching the appliance, ensure that it engages firmly with the

brackets.

3. Align the appliance horizontally by turning the brackets. If required, the

appliance can be moved to the right or left.

4. Firmly tighten the screws for the brackets. When doing so, hold the

brackets securely in place.

5. Firmly tighten the screws.

For the various installations use screws and screw anchors suited to the type

of wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and screw

anchors are provided with the product, kindly check the screws are suitable

for the type of wall in which the hood is to be fixed.

• FIXING THE DECORATIVE TELESCOPIC FLUE

Arrange the electrical power supply within the dimensions of the decorative

flue. If your appliance is to be installed in the ducting version or in the

version with external motor, prepare the air exhaust opening. Adjust the

width of the support bracket of the upper flue (Fig.3). Then fix it to the

ceiling using the screws A (Fig.2) make sure that it is in line with your hood

and respecting the distance from the ceiling indicated in Fig.2. Connect the

flange C to the air exhaust hole using a connection pipe (Fig.4).

To transform the hood from a ducting version into a filtering version, ask

your dealer for the charcoal filters and please follow the installation

instructions.

• FILTERING VERSION

Install the hood and the two flues as described in the paragraph for

installation of the hood in ducting version. To assemble the filtering flue

refers to the instructions contained in the kit. If the kit is not provided, please

order it from your dealer. The charcoal filters must be fitted in the ducting

unit located inside the hood.

USE AND MAINTENANCE

• It is recommended to operate the appliance prior to cooking.

It is recommended to leave the appliance in operation for

15 minutes after cooking is terminated in order to completely eliminate

cooking vapors and odours.

The proper function of the cooker hood is conditioned by the regularity of

the maintenance operations, in particular, the active carbon filter.

• The anti-grease filters capture the grease particles suspended in the air, and

are therefore subject to clogging according to the frequency of the use of the

appliance.

In order to prevent fire hazard, it is recommendable to clean the filter at a

maximum of 2 months by carrying out the following instructions:

- Remove the filters from the cooker hood and wash them in a solution of

water and neutral liquid detergent, leaving to soak.

- Rinse thoroughly with warm water and leave to dry.

- The filters may also be washed in the dishwasher.

Please take note that the aluminum panels may alter in color after several

washes.

• The active carbon filters purify the air that is replaced in the environment.

The filters are not washable or reuseable and must be replaced at maximum

every four months. The saturation of the active carbon filter depends on the

frequency of use of the appliance, also by the type of cooking and the

regularity of cleaning on the anti-grease filters. (Fig 6) To remove the

charcoal filters place our hand on one filter at a time and turn it toward the

front part. The charcoal filter can now be removed. Always ensure to replace

both filters at the same time.

This manual suits for next models

Table of contents

Popular Ventilation Hood manuals by other brands

emmeti

emmeti RECUPA MED A-140 Installation and use manual

Nibe

Nibe F135 user manual

Kuppersberg

Kuppersberg INTRO 60 Technical Passport

Zephyr

Zephyr Spruce AK9834BS Use, care and installation guide

Hisense

Hisense MH6INBG manual

Miele

Miele DA 1255 Operating and installation instructions

Broan

Broan 46000 Specification sheet

GE Profile PV977 Owner's Manual & Installation Instructions

FALMEC

FALMEC FFRIA24W5FS Instruction booklet

Whirlpool

Whirlpool RH2600XL-1 SERIES installation instructions

Küppersbusch

Küppersbusch DX ISLA instruction manual

ETNA

ETNA AV360RVS Instructions for use

JUNO

JUNO JDF603E6 installation manual

Miele

Miele DA 6708 D Operating and installation instructions

Tricity Bendix

Tricity Bendix LE 150 Installation & operating instructions

AEG

AEG X68163BV1 user manual

AEG

AEG 125 D operating instructions

Smeg

Smeg KSEV97X instruction manual