Brave Smyle - C User manual

Brave Smyle - C

Brave Smyle - LC

Brave Smyle - C/C

User guide

Version 2.6

Brave –Door Intercom

Dear customer

Congratulation to your purchase of “BRAVE SMYLE door intercom”. The

BRAVE Smyle door intercom is designed as universal project to be suitable for

different installation on the field and brings more features and possibilities.

This manual is designed for Urmet 1129 panel in 4 models with 1 or 2

buttons:

Brave Smyle - C - Comfort model

Brave Smyle - C/C - Comfort model with analog camera

Brave Smyle - LC - Low cost model

Basic features of BRAVE door intercoms

SMYLE solution –surface installation only

IP 44 casing protection

LED cards lighting

Integrated analog color camera (C/C, LC/C)

1 (2*) relay with 8 different operational modes

possibility to use electrical lock PSU for feeding the unit (C)

elektronical loudness settings ( without neccessity open the unit)

adjustable tones detection for REDIAL or Hanging Up

integrated RTC ( realtimeclock) circuit –automatical DAY/NIGHT

switching (C)

programming by phone DTMF or by USB cable from PC**

24 digits length of number including * # Flash and Pause

(C/C, LC/C) –models only

* Comfort version only

** USB cabel is an option

Version of manual V2.6 22.10.2013

Alphatech spol. s r.o.

Jeremenkova 88

140 00 Praha 4

Tel/fax: 272103334

www.alphatech.cz / info@alphatech.cz

Content

1BASIC DESCRIPTION.........................................................................................6

1.1 FEATURES........................................................................................................6

1.2 TERMINOLOGY.................................................................................................7

1.3 DIFFERENT MODELS OF SMYLE BRAVE DOOR INTERCOM ................................8

1.4 MODELS OF BRAVE DOOR INTERCOM...............................................................8

1.5 PCB SCHEMATICS............................................................................................9

2INSTALLATION.................................................................................................12

2.1 ASSEMBLY.....................................................................................................12

2.1.1 Assembly of Brave Smyle front panel........................................................12

2.1.2 Assembly of cards backlighting.................................................................13

2.1.3 Wall mounting of Brave Smyle..................................................................13

2.1.4 Replacing of cards backlighting after wall mounting...............................14

2.1.5 Cards exchange (name cards)...................................................................14

2.2 CONNECTION .................................................................................................15

2.2.1 Code relay (COSW) ..................................................................................16

2.3 CAMERA (/C VERSION ONLY) ........................................................................18

2.4 ACCSSESORIES...............................................................................................19

2.4.1 Weather hood 19

2.4.2 TimeRelay 19

2.4.3 DistyBox 19

2.4.4 Power supply 12V.....................................................................................20

2.4.5 Programming cable USB..........................................................................20

2.4.6 BlackBox 20

3DOOR INTERCOM SERVICE .........................................................................21

3.1 SIGNALLING OVERVIEW .................................................................................21

3.2 VISITOR AT THE DOOR....................................................................................22

3.3 PERSON INSIDE BUILDING...............................................................................24

3.3.1 Outgoing call 24

3.3.2 Incoming call 25

3.4 ACOUSTIC PATH SETTING...............................................................................25

4PARAMETRES PROGRAMMING ..................................................................26

4.1 PROGRAMMING BY PHONE .............................................................................26

4.1.1 Programming enter...................................................................................26

4.1.2 Parametres programming.........................................................................26

4.2 PC PROGRAMMING –BRAVESET PROGRAMM ................................................27

5DESCRIPRION OF PROGRAMMABLE PARAMETRES............................28

5.1 DIRECT NUMBERS DIAL –MEMORIES..............................................................28

5.2 RELAY(S).......................................................................................................29

BRAVE –user guide

5.3 BASIC PARAMETRES.......................................................................................34

5.4 TIME PARAMETRES.........................................................................................36

5.5 SYSTEM PARAMETRES....................................................................................39

5.6 HANDSFREE PARAMETRES SETTING...............................................................42

5.7 TIME PROGRAMM –AUTOMATIC DAY/NIGHT SWITCHING (C).....................45

5.8 DEFAULT SETTTING AND ERASING .................................................................47

5.9 PROGRAMMING TERMINATION .......................................................................47

5.10 PARAMETRES OVERVIEW ...............................................................................48

6TECHNICAL PARAMETRES ..........................................................................52

6.1 ELEKTRICAL PARAMETRES.............................................................................52

6.2 MECHANICAL DIMENSIONS ............................................................................52

7TABLE FOR EASY PROGRAMMING............................................................53

BRAVE –user guide

1 BASIC DESCRIPTION

1.1 Features

Voice communication is powered from telephone line only

Tone (DTMF) and pulse dial

Two 24digit numbers with each button (including *, #, Flash and Pause)

DAY/NIGHT switching by DTMF code or automatically by integrated

real time clocks - RTC, weekly schedule (C model)

Possibility of the call extension by * or # choice

Possibility to connect 1 or 2 (only C) independent locks for door

opening

8 different relays modes (for example: additional ring, progressive

opening)

Two codes for hanging up the unit by telephone

Two codes for door opening by telephone for 1 pulse and two codes for

2 pulses

3 x 6 codes for each relay (code by buttons at doors)

Can be connected electrically secure lock on the first switch (serial

activation code)

Possible switched on hang up by press the same push button

Possible switched on mode "Baby Call"

Possible switched on suppress receive DTMF by microphone

Possible switched on accoustic tick to the conversation for speech

recognition

Possible switched on accoustic signalization of close the relay

Adjustable number of rings before pick up an incoming call

Adjustable parameters of tone dial, length of Flash and Pause

Adjustable parametres of acoustical signalization

Adjustable parametres of tones detector

Elektronical loudness settings ( without neccessity open the unit)

Integrated analog colour camera with permanent or automatical

operation /C

Automatical camera lighting infra LED /C

Possibility of powering by external PSU 12V (Siemens) /C (C)

Easy settings of HW by DIP switch

Factory settings (default) in different levels

Programming by phone DTMF or by USB cable from PC

Integrated heating for PCB

Permanent cards lighting, switchable

Ground output for better protection against static electricity

/C - model with camera only

BRAVE –user guide

1.2 Terminology

Telephone line analog (2 wires) is way of connection to public network

(PSTN line) or connection to PABX –telephone exchange at

place of installation ( extension line)

Line picking up begin of call –same like OFF HOOK by handset

Line hanging up end of call –same like ON HOOK by handset

Dial DTMF - tone dial. It is dial by 2 tones combination (dial also

special character * and #. Use Flash loop interruption)

Pulse –dial by loop interruption (dial numbers only)

Incoming call connection between intercom and phone has been done by

dial from phone.The intercom picks up the call after

preprogrammed number of rings. After picking up and

password inserting you can programm the unit by phone.

Outgoing call connection between intercom and phone has been done by

dial from intercom, for example : by button pressing

Call establishing it is stage when call is picked up by called party. This stage

is not signalled at analog line. It just stop ringing tone and

call starts. It is difficult identify just this moment.

El.lock code function for relay closing by dial digits combination from

intercom buttons

Code relay between Doorphone Brave and the electric lock can be

connected code relay (COSW - CodeSwitch), which is

located at the lock and lock activates only when is the same

the specified serial combination of the Brave and set the

code on the board relay (COSW).

External code Digits combination dial from intercom buttons for relay

activation. External = dial by intercom buttons –out of

building ( at place of door intercom installation)

Internal code Digits combination dial from phone for relay activation

(DTMF). Internal = dial by phone –inside building ( phone

connected to other PBX extension)

The manufacturer continuously improves the product firmware. The

technology used allows you to upload to Brave the latest version of the

firmware any time using a standard computer with BraveSet and USB

cable. The latest version of the firmware is available at

http://www.alphatech.cz

BRAVE –user guide

1.3 Different Models of Smyle Brave door intercom

Brave door intercoms is designed as new generation of door intercom

units reflects all experiences collected during last 10 years of succesfull sales of

door enry solutions. Features and parametres are different for different models

of intercom to provide best balance between price and usage value.

In this manual you will meet features and parametres marked by (C) which are

specific for Brave Smyle (Comfort) model only and features and parametres

marked (M) which are planned for modular model (in Smyle solution are not

provided due mechanical solution)

Labelling of availability function :

Model LC (low cost) has all features except particularly marked

Model /C is version equiped by full colour analog camera

Model C(comfort) has special features marked by (C)

Model M(modular) has marked (M) –in mechanical Smyle solution is not

produced! And it is mentioned in programming tables only which are same for all

models.

1.4 Models of Brave door intercom

SMYLE models of Brave LC/C includes appropriate mother board with all

connectable elements.

Brave Smyle - 01C Brave Smyle - 01C/C Brave Smyle –02C Brave Smyle –2C/C

Brave Smyle - 01LC Brave Smyle –02LC

Models LCand Care different up mother board components. In model (LC)is

missing:

Second relay

RTC real time clocks for automatic DAY/NIGHT switching

Models with camera /C have added:

Possibility of external powering (usable for relay modes 7 and 8)

automatical / permanent lighting for camera (infra)

switch off cards lighting

disconnectable internal impedance for camera cable ending 75ohm

BRAVE –user guide

1.5 PCB Schematics

All functional and connectional elements are marked by red rounded

number at bellow picture. Explanation follow on next page.

Pict. 1 Brave Smyle mother board

(1) + (3) + (7) + (11) - version /C only

relay 2version (C) only

BRAVE –user guide

1. Camera lighting - infra LED. It lights up space before camera when is active.

It is possible switch off (via. item 7) –version for camera only /C

2. Connector to PC connection via USB cable

3. Analog colour camera –version with camera /C only

4. Speaker connection

5. Microphone connection (caution on polarity)

6. DIP switch in all models:

1 = Service, usage –when programming

password is forgotton. Incoming call is

going directly to programming mode

where you can set new password.

2 = Heating –switch ON integrated heating of mother board to increase resistance

against condensation water during changes of temperature

7. DIP switch position in versions (C)and /C:

3 = external power supply

4 = external power supply –switching 3 and 4 simultaneously. The powering is

used from screw 12V (11) due following reasons:

- using relay mode 7 or 8 –tpermanent switching ON/OFF is possible only

with external power supply. Dont forget setup parametr 64.

- Connection of door intercom to certain type of PBX which has problems

with current consumption on its extensions during start (Siemens).

5 = Camera lighting up (switch ON/OFF lighting of space before camera via infra

LED)

6 = Cards lighting (switch ON/OFF Leds backlighting for cards beside button)

7 = Activate permanent camera operation. In default camera is active only when

door intercom is active.

8 = Allows connect 75ohm to camera output - impedance

8. Analog telephone line (not depends on polarity)

9. Grounding –connection to ground of static electricity protection –protects

electronic of door intercom as same as PBX

10. Relays are galvanically isolated - max. 48V, max. 1,5A

model (C)has 2 relays

model (LC)has 1 relay only

on switch 1 is available relay function code (COSW - CodeSwitch) (see

page16)

11. Camera output - PAL video 1V / 75ohm. For distance longer than 25m we

recommend coax cable. For other installation UTP cable is also available. /C

model only

12. 12V power supply: - relays control

- mother board heating

- cards backlighting

- camera powering and infra LED camera lighting up

- external powering of unit (DIP 3 and 4)

The power supply might be AC as same as DC, not depends on polarity,

max consumption 250mA from 12V.

The power supply might be used also for electrical lock powering. Then we

recommend power supply 12V/1A.

This manual suits for next models

Table of contents

Other Brave Intercom System manuals

Brave

Brave Steel-C Troubleshooting guide

Popular Intercom System manuals by other brands

Bticino

Bticino LINEA 3000 Installation

MSI

MSI MSI-140 owner's manual

golmar

golmar Stadio Plus instruction manual

CyberData

CyberData 011211 series Installation quick reference

Vidos

Vidos duo M1021 user manual

Vimar

Vimar ELVOX 7539/E Installation and operation manual

SSS Siedle

SSS Siedle BTSV 850-03 operating instructions

Dahua

Dahua VTO Series quick start guide

Elvox

Elvox 5651 Wiring instructions

Videx

Videx VIDEOKIT Series owner's manual

Rocom

Rocom Doortello Business FW T2.05W2.04 user guide

Viking

Viking E-35-EWP product manual

Safeguard Supply

Safeguard Supply LRA-EX1000 user manual

SSS Siedle

SSS Siedle BFCV 850 Series operating instructions

GRD

GRD MAX V2 user manual

Alecto

Alecto ADI-250 user manual

Aiphone

Aiphone IE-8MD Installation & operation manual

Perel

Perel EDB4 user manual