Braun CombiMax K 750 Operator's manual
Service Documentation Market Release 4/97
Braun CombiMax K 750 3202
3202
3202 - 2
BINC Rev: 4/97 Service Documentation
Exploded Drawing
BAG Rev: 11/96 3202
3202 - 3
BINC Rev: 4/97 Service Documentation
Spare Parts List
BAG Rev: 1/97 3202
Pos. No. Part Description Part Number
1Cover 3202627
2Return spring 3205029
3Leg spring 3202014
4Lever 3205017
5Switching PCB 3205641
6Coupling 3202056
7Coupling 3205053
8Safety lock 3202629
9Housing K 750 3202636
10 Setting knob 3205629
11 Switch knob 3202628
12 Button 3202012
13 Pressure spring 3210004
14 Spring 3205016
15 O-ring 3205055
40 Protective cover 3202011
3202 - 4
BINC Rev: 4/97 Service Documentation
Exploded Drawing
BAG Rev: 11/96 3202
3202 - 5
BINC Rev: 4/97 Service Documentation
Spare Parts List
BAG Rev: 1/97 3202
Pos. No. Part Description Part Number
16 Spring 4227016
17 Carbon brush 4227034
18 Motor cpl. 3205634
19 Ferrite tube 3205155
20 Wiring, black 3205930
20 Wiring, brown 3205931
20 Wiring, orange 3205932
20 Wiring, red 3205933
20 Wiring, blue 3205934
21 Cable support 3202002
22 Washer 0111410
23 Damper 3205038
24 Supporting frame 3202625
25 Screw 0033423
26 Gear wheel with shaft 3202944
27 Tension roller 3202878
28 Gear wheel with shaft 3202626
29 Toothed belt 3202031
30 Screw 0028012
31 Cable clamp 4206149
32 Mains lead 3205879
33 Base 3202621
34 Rubber foot 3205025
35 Screw 0033419
36 Switch-PCB 3205642
37 Switch cam 3205078
38 Insulating tube 0818182
3202 - 6
BINC Rev: 4/97 Service Documentation
Exploded Drawing
BAG Rev: 11/96 3202
3202 - 7
BINC Rev: 4/97 Service Documentation
Spare Parts List
BAG Rev: 11/96 3202
Pos. No. Part Description Part Number
55 Lid 3202643
56 Seal ring 3202144
57 Mixer blade 3202640
59 Mixer bowl 3202641
60 Pusher 3200032
61 Lid 3200640
62 Blade 3200636
63 Ice crushing blade 3200646
64 Kneading hook 3200635
66 Safety cover 4293067
67 Whipping attachment 3200645
68 Bowl 3200630
70 Grating insert 3200151
71 Coarse slicing insert 3200153
72 Fine slicing insert 3200152
73 Coarse shredding insert 3200155
74 Fine shredding insert 3200154
75 Julienne insert 3200158
76 Insert carrier 3200633
77 French fries system 3200634
78 Slicing insert 3200650
79 French fries insert 3200651
80 Insert carrier 3200649
3202 - 8
BINC Rev: 3/98 Service Documentation
Exploded Drawing
BAG Rev: 11/96 3202
3202 - 9
BINC Rev: 3/98 Service Documentation
Spare Parts List
BAG Rev: 11/96 3202
Pos. No. Part Description Part Number
1Cone 3200637
2Strainer basket 3200638
30 Mixing arm 3200644
31 Whisk 3200643
3202 - 10
BINC Rev: 4/97 Service Documentation
Service Information
BAG Rev: 2/97 3202
Technical Data
Nominal voltage/frequency: 120V 60 Hz
Driving motor: DC motor B2-DC
Nominal power: approx. 600 W (load dependent)
No-load power: approx. 120 - 180 Watts
No-load speed position 2: approx. 240 - 300 r.p.m. at the bowl coupling
No-load speed position 14: approx. 1850 - 2200 r.p.m. at the bowl coupling
No-load speed position 2: approx. 1100 r.p.m. at the mixing coupling
No-load speed position 14: approx. 10500 r.p.m. at the mixing coupling
Overload protection: electronic controls, see use instructions
Mixing arm rotation: approx. 14 - 130 r.p.m. mixing arm into the bowl
approx. 144 - 1320 r.p.m. whisk into the mixing arm
Length of mains lead: approx. 1.30 m
Note about the screws The special screws (25/35), can only be removed with a screw
driver furnished with a special blade insert. These special blade
inserts for the screwdriver can be ordered from the parts department.
Because of approval-board requirements and reasons of safety, only
the special screws (35) into the base plate must be used to avoid
tampering by un-authorized persons.
Note about the PCB Attention, charging capacitor on the PCB (36) is charged, use a
resistor of 10-50 Ohms to discharge.
Note about the wiring All connecting cables are provided with self-securing plugs. In order
be bent down slightly. These pins must not be deformed or broken
off. In case that the plug does not snap in correctly to the connecting
contact, a completely new cable must be used.
Note about the speed It is not possible to adjust the speed. In case that the number of
revolutions does not correspond to the technical data, the device is
defective.
This manual suits for next models
1
Other Braun Food Processor manuals
Braun
Braun Multiquick 7 User manual
Braun
Braun FP3020 User manual
Braun
Braun Multipractic MC 100 Quick guide
Braun
Braun Multiquick system 300 Quick guide
Braun
Braun MQ 40 User manual
Braun
Braun PurEase FP 3131 User manual
Braun
Braun FX 3030 User manual
Braun
Braun MultiSystem K 3000 User manual
Braun
Braun Multiquick 7 MR 740 cc User manual
Braun
Braun TributeCollection FX 3020 User manual
Braun
Braun Multiquick 5 User manual
Braun
Braun FP3020 User manual
Braun
Braun FP3020 User manual
Braun
Braun CombiMax 700 User manual
Braun
Braun MULTIQUICK 7 K 3000 User manual
Braun
Braun Multiquick 7 MR740 cc User manual
Braun
Braun MR 730 cc User manual
Braun
Braun Multiquick 7 User manual
Braun
Braun CombiMax 700 Vital User manual
Braun
Braun CombiMax 700 User manual
