B+K precision 1685B Owner's manual
Model: 1685B, 1687B, 1688B, 1900B, 1901B, 1902B
Switching DC Power Supplies
PROGRAMMING MANUAL
Table of Contents
1USB Interface Connection.............................................................................2
1.1 USB (Virtual COM) Configuration ..................................................................................... 2
2PC Software..................................................................................................2
2.1 General Functions and Display......................................................................................... 2
2.2 External Timed Program................................................................................................... 5
2.3 Internal Preset Memory ................................................................................................... 6
2.4 Data Log............................................................................................................................ 7
2.5 Settings............................................................................................................................. 8
2.6 Power Supply Calibration ................................................................................................. 9
3Command Set.............................................................................................11
2
1USB Interface Connection
Users can remotely control the power supply via PC over the USB interface. Upon installation of the USB driver, the
PC can control the instrument over virtual COM.
Connecting Instrument to PC
1. Download the USB drivers from www.bkprecision.com .
2. Connect the included USB cable to the power supply and the USB port on the PC.
3. When Windows recognizes the USB connection, do not follow the default Windows driver installation wizard.
Simply run the setup file from the downloaded USB drivers and follow the prompt to install drivers.
4. The computer will recognize the instrument as a USB (virtual COM) device, meaning it will be detected as a serial
COM port. Windows will automatically assign a COM port to the instrument. Please verify which COM port
Windows has assigned by going into Device Manager.
1.1 USB (Virtual COM) Configuration
The following serial port settings are used by the power supply.
Baudrate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
2PC Software
2.1 General Functions and Display
Note: The power supply must be in Normal Mode and operated as a standalone equipment (not connected in
series or parallel with multiple supplies) for PC interface control.
The remote control PC software will display all output voltage, current, and power readings. Voltage and current
values can be set using either the text box or slide bar. The output status is shown on the display panel and can be
clicked to set the power supply output ON or OFF.
3
Figure 2.1 - PC Software General Functions and Display
1. Display panel
Shows real-time information of power supply’s output and setting voltage and current.
2. Main configuration and data log display panel
Use to change general setting of program and display data log.
3. Voltage and current setting panel
Use to set output value and output On/Off.
4. File panel
Use to save, load, and print data.
5. File description input
Use to enter description of program or log file.
6. Program running cycle setting panel
Use to set running cycle for External Timed Program.
7. Information panel
Use to display maximum voltage/current, sampling time, upper voltage/current limit, and software
version.
2
1
3
4
5
6
7
4
Figure 2.2 - Display Panel
Figure 2.3 - Output Configuration Panel
You can directly type the desired output voltage and output current and then click “Set” button to set the value or
use the slide bar to adjust the value.
5
2.2 External Timed Program
External Timed Program is completely controlled by the PC. The PC counts the step time and changes the specified
voltage and current levels of the power supply.
Figure 2.4 - External Timed Program
External Timed Program Procedure
1. Select the External Timed Program tab to switch to the External Timed Program tab.
2. Set voltage, current, and time parameters for number of steps (max 20) needed in timed program. Values
can be configured using the slide bar or set incrementally by pressing the left and right arrow keys on your
keyboard.
3. Specify desired number of running cycles. Up to 999 running cycles can be entered. Enter 0 for continuous
cycle.
4. To run the timed program, click the “Run” button. During running cycles, the “Stop” button can be clicked
to stop the program.
5. To save and export the table to a '.csv’ file, enter Table Name in text box and click the “Save” icon. The
timed program table data can be retrieved or printed by clicking the “Load” and “Print” icons.
6. To delete all data in the table, click the “Clear Table” button.
6
2.3 Internal Preset Memory
The Internal Preset Memory tab allows you to define the power supply’s presets remotely.
Figure 2.5 - Internal Preset Memory
Internal Preset Memory Procedure
1. Select Internal Preset Memory tab to switch to the Internal Preset Memory function.
2. Enter in desired Voltage and Current values for Presets 1, 2, and 3.
3. Click “Set” to select and save Presets.
4. To retrieve power supply’s stored presets, click the “Read from PS” button.
5. Retrieved data will be shown in red if they exceed the present preset upper voltage and current limit value.
6. To save the table, enter Table Name in text box and click “Save” icon. Data of different groups of presets can
be classified, stored, exported to a csv file, printed, or retrieved for use at any time.
7. To delete all data in the table, click the “Clear Table” button.
7
2.4 Data Log
The Data Log window can be used to view real-time or stored output voltage, current, and power data. Move left
and right along the graphed data by adjusting the “Move” slide bar. Zoom In/Out of the graph by adjusting the
“Zoom” slide bar.
Figure 2.6 - Data Log Window
To save and export a data log to a ‘.csv’ file, enter Log Name in text box and click the “Save” icon.
The log can be retrieved or printed by clicking the “Load” and “Print” icons.
Time Frame Concept of Data Log
The data logging function always starts when the software begins to run.
0 seconds on the right hand side of the X-axis indicates real-time data with the length of time lapsed on the left
hand side.
The X-axis is adjustable using the “Move” and “Zoom” slide bars so that any time period of the log can be
displayed for analysis.
8
2.5 Settings
Use this tab to configure general settings. The software will automatically detect power supply model and COM
port used. If not found, please recheck COM port or USB driver installation as mentioned in “USB Interface
Connection” section.
Figure 2.7 - Settings Configuration
Data Log Sampling Time: You can select your desired data log sampling time from 1 second and up.
Voltage Upper Limit (UVL) Setting: You can set your power supply’s upper voltage limit value to safeguard your low
voltage applications.
Current Upper Limit (UCL) Setting: You can set your power supply’s upper current limit value to safeguard your low
current applications.
Note: Any changes to the UVL and UCL settings will be saved on the power supply. These values can only be set
through remote PC software.
Update Firmware: The power supply’s firmware could be updated by the user through the software for future
versions. This is only available for power supplies with firmware version 3.1 or above.
9
2.6 Power Supply Calibration
Note: Software calibration only available for firmware 3.1 or above.
B&K Precision recommends a calibration interval of one year to ensure that the power supply meets specifications.
This instrument features closed-case calibration. To perform the calibration, the following equipment is required:
Digital multimeter
DC electronic load
The following calibration instructions may be used by authorized technicians or calibration personnel
only. If you are not authorized, do not attempt to calibrate the instrument yourself, as it may damage the
instrument and void the warranty.
Please refer to the following figure to connect your power supply for Voltage and Current Calibration.
Figure 2.8 - Connection Setup for Calibration
Click on the Calibration tab.
Figure 2.9 - Calibration Screen
Other manuals for 1685B
1
This manual suits for next models
5
Table of contents
Other B+K precision Power Supply manuals
B+K precision
B+K precision 9100 Series User manual
B+K precision
B+K precision 1610 User manual
B+K precision
B+K precision 9115 User manual
B+K precision
B+K precision 1671A User manual
B+K precision
B+K precision 1785B User manual
B+K precision
B+K precision 1651A User manual
B+K precision
B+K precision 1697B User manual
B+K precision
B+K precision 1665 User manual
B+K precision
B+K precision 1670A User manual
B+K precision
B+K precision XLN3640 User manual
B+K precision
B+K precision 1680 User manual
B+K precision
B+K precision PVS10005 User manual
B+K precision
B+K precision BK 1692 User manual
B+K precision
B+K precision XLN6024 User manual
B+K precision
B+K precision 9140 Series User manual
B+K precision
B+K precision 1693 User manual
B+K precision
B+K precision 19*00 User manual
B+K precision
B+K precision 1601 User manual
B+K precision
B+K precision MR Series User manual
B+K precision
B+K precision 1785B User manual
