Boyo VTB-100 Installation manual
VIVID TV BOX
VTB-100
Operation Manual
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Introduction
The compact unit easily turns your LCD, CRT monitor, plasma display or projector into a
multimedia center. ith a built-in TV tuner and multiple video ports, you can connect
DVD players, digital cameras, VCRs or even game consoles. It provides S-video,
composite (RCA) video connectors, audio pass-through and front-panel headphone
support.
ith advanced scaling technology, the unit provides 3:2 pull down correction that
eliminates jitter from DVD movies that originated from motion picture films. Motion and
adaptive de-interlacing also improves the clarity and sharpness of the overall image
producing sharp, clear, saturated images.
Users can also adjust contrast, brightness, color, hue and channel from the remote control
and on-screen menu.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•Stand-alone, Plug-n-Play. No software drivers required and no messy PC installation
routines.
•No PC compatibility problems & special firmware design for some famous PDPs
(Plasma Displays).
•Built-in TV tuner, support up to 125 channels with Fine Tuning function.
•Provide user-friendly OSD (on screen display) to control functions.
•Automatic source standard detection (NTSC/PAL/SECAM for video or S-Video).
•Auto-scan air/cable TV channels, channel rename, and channel editing functions.
•Full screen TV display, support VGA (640x480), SVGA (800x600) and XGA
(1024x768) display resolution.
•DE-INTERLACE function provides can provide high quality pictures with sharp &
stable image output to VGA/DVI out.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
•Localized TV system menu selection.
•Compatible for multi-signal inputs: TV tuner, Video, S-Video, Component (Y, Cb,
Cr) & VGA.
•Support Sleep Timer Setting.
•Available in NTSC/Multi-PAL (BG, DK, I)/SECAM model.
•Re-mapping function for programming your favorite channels.
•Fully functional infrared remote control.
•Supports 3:2 pull-down for film mode.
•Supports MTS for NTSC system & NICAM for PAL.
•Supports 15pin D-Sub graphic card (VGA in); 15pin D-Sub monitor (VGA out) and
DVI Monitor (DVI out).
•Supports Teletext (optional) for PAL
•Supports protection of Channel setting: V-Chip (optional) for NTSC system/USA.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Front Panel
1. POWER
Pressing this button to switch the unit On or Off.
. VIDEO SOURCE SELECTION
Select the video source between TV/Cable, S-Video, AV,
Component (Y, Cb, Cr) or PC
3. POWER LED / INFRARED RECEIVER
Lights when the TV BOX is powered up and ready to operate. Receive the Infrared
signal from the remote control
4. : Decrease the sound volume
5. : Increase the sound volume
6. : : Adjust channel decrease
7. : Adjust channel increase
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Rear Panel
1. DC In- Connect to a 12V power supply.
. VGA Out- Connect your 15 Pin Monitor to the VGA output.
3. VGA In- Using the 15 pin VGA cable provided, connect one side to the VGA
output on your pc and the other side to the VGA In of your unit.
4. Video-In -Please connect the external video from VCR, LD/VCD/DVD or video
game console to the Video In port.
5. S-Video- Please connect it to the S-Video In port when the external Video device is
S-Video.
6. Component (Y, Cb, Cr) Input- Please connect them to the Component (Y, Cb Cr)
In port when the external video device has Y, Cb, Cr Output’s support.
7. RF In (VHF/UHF)- Please connect your RF cable to RF IN port to receive antenna
or cable TV signal.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Side Panel
1. Line In- Connect the audio from sound card to Line In port. Thus you should be
able to have sound from PC/external speakers even when your TV Box is in stand-
by mode.
. Line Out- Connect the Line Out to your PC/external speakers.
3. AUDIO (R&L) In- Please connect the external audio to the Audio In port.
4. DVI Out (Optional)- Use the DVI Cable (male to male) to connect to DVI
supported Monitor or other video devices.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Connection and Installation
1. To prevent damage to your equipment due to ground potential
influence, make sure that all devices on the installation are properly
grounded. Consult your dealer for technical details if necessary.
2. Please turn off the power of all devices before connection.
To install the unit for the analog TV and A/V device connection, please refer to the
diagram below.
Notes:
* Audio/Video connection: For audio connection, pleas use RCA audio (LTR) connector.
For video connection, please choose either RCA video connector or S-Video connector.
* Moreover, for connection to a stand alone, please omit those connections associated
with PC.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Operation Instruction
Initial Settings
For all function settings of the unit, you can use the supplied remote control unit.
Please refer to the following steps below:
1. Install 2 AAA batteries into the Remote Control.
2. Power on the unit or press the Power button on the Remote Control
3. Press the “Source” button to select signal source.
4. Press the “Autoscan” button to scan and memorize all the channels.
5. After the auto scan is finished, please press channel “+”,”-“ or channel number keys
to select channels.
6. Press the “Menu” button and the OSD Main Menu window appears.
7. Press or , to select the OSD Sub Menu.
8. Press “ENTER” for the he selected Sub Menu
9. If you don’t want to select the Sub MENU, press” EXIT” button.
Source Select Setting
Source Select Sub-Menu provides TV, AV, S-VIDEO, YCbCr and PC mode selections.
1.In the SOURCE Sub Menu, press or button to choose the Video Source; TV;
AV; S-video; YCbCr; PC.
2. Press “ENTER” to select the source.
3. Press “EXIT” to return to the Main “MENU”.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
PICTURE setting
Picture Sub-Menu provides BRIGHTNESS, CONTRAST, COLOR, TINT,
SHARPNESS adjustment modes AND RESET.
1. In the Picture Sub-MENU, PRESS or button to choose the required item.
2. Press or button to adjust the selected item.
3. Press ENTER to confirm the setting.
4. Select Reset to clear all adjustments and return to factory settings.
5. hen finished making all picture adjustments, press the “Exit” button to return the
main menu.
SOUND Setting
The SOUND Sub-Menu provides BASS, TREBLE, BALANCE adjustment modes and
the RESET mode.
1. In the SOUND Sub MENU, Press or button to choose the required item.
2. Press “Enter” to select the item.
3. To adjust the selected item by and button.
4. hen finished, press “Exit” to return to SOUND Sub MENU.
5. Select RESET to clear all adjustment and return to factory setting.
6. hen finished, press the “Exit” button to return to the Main MENU.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
TV FUNCTION Setting
TV Function sub-menu provides different function selections for the NTSC and PAL
models. Please refer the following diagrams.
NTSC PAL
NTSC system
Select AIRCATV, CHANNEL EDIT, FINETUNE and AUTO SCAN by pressing the
button, and then pressing “ENTER” to confirm the setting.
PAL system
Select CHANNEL SWAP, CHANNEL RENAME, CHANNEL EDIT, FINETUNE,
AUTO SCAN and VIDEO STANDARD by pressing the button, and then pressing
“ENTER” to confirm the setting.
1. AIRCATV (for NTSC model only)
Before scanning channels, please select appropriate frequency tables among AIR
ANTENNA) and CATV Cable).
To scan program channels automatically, press the AUTOSCAN button. The unit can
auto detect the TV system. After finishing AUTOSCAN, the scanned program channel
will be saved.
. Channel Swapping (for PAL model only)
Press or and “Enter” button to enter the CHANNEL SWAP function.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NS , 2304 Australia, [email protected]
Phone +61 249689313 Fax +61 249689314
www.converters.tv
Table of contents
