2
Installation Safety Instructions
Before installation, please read this manual carefully and be familiar with the installation
steps.
Be very careful when installing the battery. When installing a lead-acid liquid battery, you
should wear protective glasses. Once you come into contact with the battery acid, please rinse
it with clean water in time.
Avoid placing metal objects near the battery to prevent short circuits of the battery.
Acid gas may be generated when the battery is charged, make sure the surrounding environ-
ment is well-ventilated.
When installing the cabinet, be sure to leave enough space around the inverter for heat
dissipation; do not place the inverter and the lead-acid liquid battery together.
False connection points and corroded wires can cause extreme heat to melt wire insulation,
burn surrounding materials, and even cause fire, so make sure that the connectors are
tightened, and the wires are fixed by cable ties to avoid loose connectors caused by shaking of
the wires during mobile applications.
When installing outdoors, avoid direct sunlight and rainwater infiltration.
After the power switch is turned off, there is still high voltage inside the inverter, please do
not open or touch the internal components, and related operations can only be performed after
the capacitor is fully discharged.
Please do not install the inverter in harsh environments such as damp, greasy, flammable,
explosive, or a large amount of dust.
It is forbidden to reverse the polarity of the battery input terminal of this product, otherwise, it
is easy to damage the equipment or cause unpredictable dangers.
The AC output is a high voltage, please do not touch the wiring.
When the fan is working, do not touch it to avoid injury.
It is necessary to confirm that the inverter is the only input device for the input power of the
load equipment, and it is forbidden to use it in parallel with other input AC power sources to
avoid damage.
Additional Safety note
In order to protect the personal and property safety of users while using this product, the
relevant information is provided in the manual and highlighted with the following symbols.
If you encounter the following symbols in the manual, please read the relevant text carefully.
WARNING: Indicates a hazard of electric shock which, if not avoided, will result in equip-
ment damage or personal electric shock/injury.
ATTENTION: Indicates a potential hazard that, if not avoided, could result in equipment
damage.
NOTE: Indicates an important prompt during operation, failure to execute may cause an
equipment failure alarm.
