BOT LIGHTING MERIDA6G Technical specifications

Bot Lighting S.r.l.

Via Lombardia, 37/39

30030 Cazzago di Pianiga (VE) –Italy

www.botlighting.it

[email protected]

MERIDA

MANUALE D’USO E INSTALLAZIONE

USE AND INSTALLATION MANUAL

INTRODUZIONE - INTRODUCTION

Paletto da giardino in alluminio verniciato per lampada GU10.

Garden bollard in painted aluminum for GU10 bulb.

CARATTERISTICHE TECNICHE -TECHNICAL CHARACTERISTICS

MODELLO

MODEL

Colore

Colour

Tipo

Type

Volt

Protezione

Protection

Classe

Class

Dimensioni

Dimensions

(mm)

Temperatura

di lavoro

Working

Temperature

MERIDA6G

ANTRACITE

Anthracite

GU10

110-240V

50/60Hz

IP65

136x100x600

-20° - +40°C

MERIDA6C

CORTEN

Corten

GU10

110-240V

50/60Hz

IP65

136x100x600

-20° - +40°C

ISTRUZIONI DI INSTALLAZIONE –INSTALLATION INSTRUCTION

1. Prima di iniziare assicurarsi di aver tolto tensione all’impianto elettrico. Svitare il diffusore.

2. Segnare la posizione di fissaggio, forare e inserire gli appositi tasselli adeguatamente dimensionati

3. Estrarre dall’interno del paletto il sistema morsettiera e svitare il coperchio della scatola dei morsetti.

4. Effettuare il collegamento elettrico, avendo cura di accoppiare il cavo della fase (marrone) al morsetto “L”, il cavo del

neutro(blu) al morsetto “N” e il cavo di terra (giallo e verde) al morsetto centrale.

5. Fissare il paletto a terra

6. Inserire una lampada con attacco GU10 a propria discrezione e riavvitare il diffusore. Una volta completata la procedura

di installazione è possibile ridare tensione all’impianto.

1. Before starting, make sure you have disconnected the electrical system. Unscrew the diffuser.

2. Mark the fixing position, drill and insert the suitable anchors suitably sized

3. Extract the terminal block system from the inside of the pole and unscrew the terminal box cover.

4. Make the electrical connection, taking care to couple the phase wire (brown) to terminal “L”, the neutral wire (blue) to

terminal “N” and the earth wire (yellow and green) to the central terminal.

5. Secure the post to the ground

6. Insert a lamp with a GU10 socket at your discretion and screw the diffuser back on. Once the installation procedure has

been completed, it is possible to restore power to the system.

NOTE RELATIVE ALLO SMALTIMENTO - NOTES ON DISPOSAL ON WASTE MATERIAL

Bot Lighting S.r.l.

Via Lombardia, 37/39

30030 Cazzago di Pianiga (VE) –Italy

www.botlighting.it

[email protected]

This manual suits for next models

Table of contents

Other BOT LIGHTING Outdoor Light manuals

BOT LIGHTING

BOT LIGHTING ARONA601 Technical specifications

BOT LIGHTING

BOT LIGHTING ARONA303EM Technical specifications

BOT LIGHTING

BOT LIGHTING Shot YUMA5N Guide

BOT LIGHTING

BOT LIGHTING SHOT FLAME2N Guide

BOT LIGHTING

BOT LIGHTING Shot YUMA15N Guide

BOT LIGHTING

BOT LIGHTING SEGOVIA1E27 Technical specifications

BOT LIGHTING

BOT LIGHTING Shot YMA20NP Technical specifications

BOT LIGHTING

BOT LIGHTING IBIZA Technical specifications

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual