BOSSCO DD-500 User manual

p. 1

MIDI Implementation

Model: DD-500

Date: September 28, 2017

Version: 2.00

1. Recognized data

Received messages are transmitted without change according to the "MIDI: MIDI IN->OUT" and "MIDI: USB IN->OUT" settings.

■Channel Voice Message

These messages are received if the "MIDI: Rx CHANNEL" setting matches the MIDI channel number of the incoming message.

●Control Change

○Bank Select

Status 2nd Byte 3rd Byte

BnH 00H mmH

BnH 20H 00H

n = MIDI Channel Number: 0H –FH (0 - 15) 0=ch.1 15=ch.16

mm = Bank Number (MSB) : 00H - 02H ( 0 - 2)

* After this unit starts up, it operates with 00H as the bank number until a bank select message is received.

○Control Change Number #1～#31 (MSB), #33 - #63 (LSB), #64～#95

Status 2nd Byte 3rd Byte

BnH ccH vvH

n = MIDI Channel Number: 0H –FH (0 - 15) 0=ch.1 15=ch.16

cc = Control Change Number: 01H - 1FH (MSB), 20H - 3FH (LSB), 40H - 5FH (1 - 31, 32 - 63, 64-95)

vv = Value : 00H - 7FH (0 - 127)

* Recognized if "MIDI CC IN" = ON.

* Recognized if the "Assign: SRC" setting is CC#1--#31 or CC#64--#95.

Target value = (parameter min) + ((((cc value) - (act range low)) * (parameter range)) / ((act range High) - (act range Low)))

* When a CC# matching the CC# that is specified as "MIDI: EFFECT SW," "MIDI: EFFECT A," "MIDI: EFFECT B," "MIDI: TIME CC," "MIDI: FEEDBACK CC," "MIDI: E.LEVEL CC,"

"MIDI: TONE CC," "MIDI: MOD DEPTH CC," "MIDI: CTL1 CC," "MIDI: CTL2 CC," "MIDI: EXP CC," "MIDI: LOOP ON/OFF," "MIDI: LOOP REC/DUB,"

"MIDI: LOOP PLAY," "MIDI: LOOP STOP," "MIDI: LOOP CLEAR" is received, that controller is controlled.

* LSB (#33 - #63) is received when "TIME CC" set to CC #1 - #31

CC #1 - #31

MSB value = 0

Parameter value = parameter min

MSB value = 127

Parameter value = parameter max

Others

Parameter value = (((cc MSB+LSB value) * (parameter range)) / 16383)

cc MSB+LSB value = (MSB value) * 128 + (LSB value)

CC #64 - #95

Parameter value = (((cc value) * (parameter range)) / 127)

* "FEEDBACK CC," "E.LEVEL CC," "TONE CC," "MOD DEPTH CC"

Parameter value = (((cc value) * (parameter range)) / 127)

Parameter range = (parameter max) - (parameter min)

●Program Change

Status 2nd Byte

CnH ppH

n = MIDI Channel Number : 0H - FH (0 - 15) 0 = ch.1, 15 = ch.16

pp = Program Number : 00H - 7FH (0 - 127)

* This message switches to the patch that is specified by "MIDI PC MAP."

■System Realtime Messages

●Timing Clock

Status

F8H

* Recognized if the "MIDI: SYNC" setting is other than INTERNAL.

p. 2

●Active Sensing

Status

FEH

* When an Active Sensing message is received, the interval of all subsequent messages will begin to be monitored.

When the message interval is being monitored, and the interval exceeds 400 ms, the display indicates "MIDI OFFLINE" and the unit returns to a state in which message interval

is not monitored.

■System Exclusive Messages

Status Data Byte Status

F0H, iiH, dev, ddH, ..., eeH, F7H

Byte Explanation

F0H: System Exclusive Message status

iiH: ID number

41H: Roland's manufacturer ID

7EH: Universal Non-realtime message

dev: Device ID (dev: 00H-1FH, 7FH) * 7FH = Broadcast

dd,...,ee = data: 00H-7FH(0-127)

F7H: EOX (End of Exclusive)

●Universal Non-Realtime System Exclusive Messages

○Identity Request Message (Device Inquiry)

Status Data Byte Status

F0H, 7EH, dev, 06H, 01H, F7H

Byte Explanation

F0H: System Exclusive Message status

7EH: Universal Non-realtime Message

dev: Device ID (dev: 00H-1FH, 7FH) * 7FH = Broadcast

06H: Sub ID # 1 (General Information)

01H: Sub ID # 2 (Identity Request)

F7H: EOX (End of Exclusive)

When this message is received, this unit transmits the prescribed identity reply message (see transmitted data).

●One Way Communication

○Request Data 1 RQ1 (11H)

Status Data Byte Status

F0H, 41H, dev, 00H, 00H, 00H, 4DH, 11H, aaH, bbH, ccH, ddH, ssH, ttH, uuH, vvH, sum, F7H

Byte Explanation

F0H: System Exclusive Message status

41H: Manufacturer ID (Roland)

dev: Device ID (00H-1FH, 7FH) * 7FH = Broadcast

00H: Model ID # 1 (DD-500 Ver.2)

00H: Model ID # 2 (DD-500 Ver.2)

00H: Model ID # 3 (DD-500 Ver.2)

4DH: Model ID # 4 (DD-500 Ver.2)

11H: Command ID (RQ1)

aaH: Address MSB

bbH: Address

ccH: Address

ddH: Address LSB

ssH: Size MSB

ttH: Size

uuH: Size

vvH: Size LSB

sum: Checksum

F7H: EOX (End of Exclusive)

p. 3

○Data Set 1 DT1 (12H)

Status Data Byte Status

F0H, 41H, dev, 00H, 00H, 00H, 4DH, 12H, aaH, bbH, ccH, ddH, eeH, ... hhH, sum, F7H

Byte Explanation

F0H: System Exclusive Message status

41H: Manufacturer ID (Roland)

dev: Device ID (00H-1FH, 7FH) * 7FH = Broadcast

00H: Model ID # 1 (DD-500 Ver.2)

00H: Model ID # 2 (DD-500 Ver.2)

00H: Model ID # 3 (DD-500 Ver.2)

4DH: Model ID # 4 (DD-500 Ver.2)

12H: Command ID (DT1)

aaH: Address MSB

bbH: Address

ccH: Address

ddH: Address LSB

eeH: Data

ffH: Data

sum: Checksum

F7H: EOX (End of Exclusive)

2. Transmitted data

■Channel Voice Messages

* Set the channel voice message transmit MIDI channel number to "MIDI: Tx CHANNEL."

●Control Change

○Bank Select

Status 2nd Byte 3rd Byte

BnH 00H mmH

BnH 20H 00H

n = MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16

mm = Bank Number (MSB): 00H - 02H ( 0 - 2)

* If the "MIDI: PC OUT" setting is ON, this message is transmitted when you switch patches. If the "BANK SEL OUT" setting is MSB, only BnH 00H mmH (MSB) is transmitted.

○Control Change Number #1～#31 (MSB), #33-#63 (LSB)、#64～#95

Status 2nd Byte 3rd Byte

BnH ccH vvH

n = MIDI Channel Number: 0H - FH (0 - 15) 0=ch.1 15=ch.16

cc = Control Change Number: 01H - 1FH, 20H - 3FH, 40H - 5FH (1 - 31, 32 - 63, 64 - 95)

vv = Value : 00H - 7FH (0 - 127)

* Transmitted if "MIDI CC OUT" = ON.

* When you operate a controller, the CC# specified by "MIDI: EFFECT CC," "MIDI: EFFECT A," "MIDI: EFFECT B," "MIDI: TIME CC," "MIDI: FEEDBACK CC," "MIDI: E.LEVEL CC,"

"MIDI: TONE CC," "MIDI: MOD DEPTH CC," "MIDI: CTL1 CC," "MIDI: CTL2 CC," "MIDI: EXP CC" is transmitted.

* LSB (#33 - #63) is transmitted when "MIDI: TIME CC" set to CC #1 - #31

CC #1 - #31

Parameter value = min

vv (MSB) = 0

vv (LSB) = 0

Parameter value = max

vv (MSB) = 127

vv (LSB) = 127

Others

vv (MSB) = (((parameter value) * 16383) / (time range)) / 128

vv (LSB) = (((parameter value) * 16383) / (time range)) - (vv (MSB) * 128)

CC #64 - #9

vv = (((parameter value) * 127) / (time range))

* "FEEDBACK CC," "E.LEVEL CC," "TONE CC," "MOD DEPTH CC"

vv = (((parameter value) * 127) / (parameter range))

Parameter range = (parameter max) - (parameter min)

p. 4

●Program Change

Status 2nd Byte

CnH ppH

n = MIDI Channel Number: 0H - FH (0 - 15) 0 = ch.1 15 = ch.16

pp = Program Number: 00H - 7FH (0 - 127)

* If the "MIDI: PC OUT" setting is ON, this message is transmitted when you switch patches.

* Patch numbers correspond to program numbers as follows.

BANK SEL.

PATCH# MSB LSB PROG#

01A 00H 00H 00H

: :

43B 00H 00H 7FH

43C 01H 00H 00H

: :

86A 01H 00H 7FH

86B 02H 00H 00H

: :

99C 02H 00H 28H

■System Realtime Message

●Timing Clock

Status

F8H

* If both "MIDI: SYNC" = INTERNAL and "MIDI: REALTIME SRC" = INT, this message is transmitted at intervals corresponding to the tempo.

* If the "MIDI: REALTIME SRC" setting is other than INT, this message is transmitted when timing clock messages corresponding to the setting are received.

●Active Sensing

Status

FEH

* This message is always transmitted at intervals of approximately 250 ms.

■System Exclusive Message

Status Data Byte Status

F0H 41H, ddH, ..., eeH, F7H

Byte Explanation

F0H: System Exclusive Message status

41H: Roland's manufacturer ID

dd,...,ee = data: 00H-7FH(0-127)

F7H: EOX (End of Exclusive)

●Universal Non-realtime System Exclusive Message

○Identity Reply Message

Status Data Byte Status

F0H, 7EH, dev, 06H, 02H, 41H, 4DH, 03H, 00H, 00H, 00H, 00H, 00H, 01H, F7

Byte Explanation

F0H: System Exclusive Message status

7EH: ID Number (Universal Non-realtime Message)

dev: Device ID (dev: 00H - 1FH)

06H: Sub ID # 1 (General Information)

02H: Sub ID # 2 (Identity Reply)

41H: Roland's manufacturer ID

4DH: 03H Device family code # 1 (DD-500 Ver.2)

00H: 00H Device family code # 2 (DD-500 Ver.2)

00H: Software revision level # 1

00H: Software revision level # 2

00H: Software revision level # 3

01H: Software revision level # 4

F7H: EOX (End of Exclusive)

* This message is transmitted when an identity request message is received.

p. 5

●One Way Communication

○Data Set 1 DT1 (12H)

Status Data Byte Status

F0H, 41H, dev, 00H, 00H, 00H, 4DH, 12H, aaH, bbH, ccH, ddH, eeH, ... hhH, sum, F7H

Byte Explanation

F0H: System Exclusive Message status

41H: Roland's manufacturer ID

dev: Device ID (00H-1FH)

00H: Model ID # 1 (DD-500 Ver.2)

00H: Model ID # 2 (DD-500 Ver.2)

00H: Model ID # 3 (DD-500 Ver.2)

4DH: Model ID # 4 (DD-500 Ver.2)

12H: Command ID (DT1)

aaH: Address MSB

bbH: Address

ccH: Address

ddH: Address LSB

eeH: Data

ffH: Data

sum: Checksum

F7H: EOX (End of Exclusive)

3. System Exclusive Address Map

DD-500 Ver.2 (Model ID : 00H 00H 00H 4DH)

-----------------------------------------------------------------------------------------------------------------

|Start |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 00 00 | Setup

| 10 00 00 00 | System

| 20 00 00 00 | MIDI PC MAP

| 30 00 00 00 | BANK (Temporary)

| 30 04 00 00 | BANK (BANK 1)

| : | :

| 33 0C 00 00 | BANK (BANK 99)

-----------------------------------------------------------------------------------------------------------------

* Setup

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 00 | Setup Common

-----------------------------------------------------------------------------------------------------------------

* System

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 00 | System Common

| 00 10 00 | System CTL

-----------------------------------------------------------------------------------------------------------------

* MIDI PC MAP

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 00 | MIDI PC MAP

-----------------------------------------------------------------------------------------------------------------

* BANK

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 00 | BANK BANK

| 00 10 00 | BANK PATCH (patch A)

| 00 20 00 | BANK PATCH (patch B)

| 00 30 00 | BANK PATCH (patch C)

-----------------------------------------------------------------------------------------------------------------

p. 6

* Setup Common Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0000 000a | Current Patch Number (0 - 296)

| | | PATCH 01A - PATCH 99C

| | 0000 bbbb |

| | 0000 cccc |

-----------------------------------------------------------------------------------------------------------------

* System Common Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0000 00dd | Global Output Mode (0 - 2)

| | | STEREO, A:DIR B:EFX, DIRECT MUTE

| 00 01 | 0000 000d | Bank wait mode (0 - 1)

| | | WAIT, IMMEDIATE

|00 02 | 0ddd dddd | Bank Extent Begin (0 - 98)

| | | 01 - 99

| 00 03 | 0ddd dddd | Bank Extent End (0 - 98)

| | | 01 - 99

| 00 04 | 0000 000d | Global Knob Lock Switch (0 - 1)

| | | OFF, ON

|00 05 | 0000 000d | Global Knob Mode (0 - 1)

| | | IMMEDIATE, HOOK

| 00 06 | 0000 00dd | Phrase Loop Mode (0 - 2)

| | | 96k MONO, 48k ST, 48k MONO

| 00 07 | 0000 000d | Global Bypass Mode (0 - 1)

| | | BUFFERED, TRUE

| 00 08 | 0000 000d | Global Pedal Action (0 - 1)

| | | PUSH, RELEASE

|00 09 | 0000 0ddd | Foot Switch Hold Time (0 - 4)

| | | 1sec, 2sec, 3sec, 4sec, 5sec

| 00 0A | 0000 00dd | Foot Switch Mode (0 - 3)

| | | NORMAL, A/B/C, A/B SIMUL, SW DN/UP

| 00 0B | 0000 00dd | Global Display Type (0 - 3)

| | | DISP_TIME, DISP_BPM, DISP_PATCH, DISP_PARAM

| 00 0C | 000d dddd | MIDI Rx Channel (0 - 16)

| | | Ch.1, Ch.2, Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9, Ch.10, Ch.11, Ch.12, Ch.13, Ch.14, Ch.15,

| | | Ch.16, OFF

|00 0D | 000d dddd | MIDI Tx Channel (0 - 17)

| | | Ch.1, Ch.2, Ch.3, Ch.4, Ch.5, Ch.6, Ch.7, Ch.8, Ch.9, Ch.10, Ch.11, Ch.12, Ch.13, Ch.14, Ch.15,

| | | Ch.16, Rx, OFF

|00 0E | 0000 000d | MIDI Program Change IN (0 - 1)

| | | OFF, ON

| 00 0F | 0000 000d | MIDI Program Change OUT (0 - 1)

| | | OFF, ON

| 00 10 | 0000 000d | MIDI Bank Select OUT (0 - 1)

| | | MSB, M+L

|00 11 | 0000 000d | MIDI Control Change IN (0 - 1)

| | | OFF, ON

| 00 12 | 0000 000d | MIDI Control Change OUT (0 - 1)

| | | OFF, ON

| 00 13 | 00dd dddd | MIDI Effect A Control Change (0 - 63)

| | | OFF, CC#1, CC#2, CC#3, CC#4, CC#5, CC#6, CC#7, CC#8, CC#9, CC#10, CC#11, CC#12, CC#13, CC#14,

| | | CC#15, CC#16, CC#17, CC#18, CC#19, CC#20, CC#21, CC#22, CC#23, CC#24, CC#25, CC#26, CC#27, CC#28,

| | | CC#29, CC#30, CC#31, CC#64, CC#65, CC#66, CC#67, CC#68, CC#69, CC#70, CC#71, CC#72, CC#73, CC#74,

| | | CC#75, CC#76, CC#77, CC#78, CC#79, CC#80, CC#81, CC#82, CC#83, CC#84, CC#85, CC#86, CC#87, CC#88,

| | | CC#89, CC#90, CC#91, CC#92, CC#93, CC#94, CC#95 ……(*A)

| 00 14 | 00dd dddd | MIDI Effect B Control Change (*A)

| 00 15 | 00dd dddd | MIDI TAP/CTL Switch Control Change (*A)

| 00 16 | 00dd dddd | MIDI Feedback Control Change (*A)

| 00 17 | 00dd dddd | MIDI Effect Level Control Change (*A)

| 00 18 | 00dd dddd | MIDI Tone Control Change (*A)

| 00 19 | 00dd dddd | MIDI Mod Depth Control Change (*A)

| 00 1A | 00dd dddd | MIDI CTL1 Control Change (*A)

| 00 1B | 00dd dddd | MIDI CTL2 Control Change (*A)

| 00 1C | 00dd dddd | MIDI EXP Control Change (*A)

| 00 1D | 00dd dddd | MIDI EFFECT ON/OFF Control Change (*A)

| 00 1E | 00dd dddd | MIDI LOOPER ON/OFF Control Change (*A)

| 00 1F | 00dd dddd | MIDI LOOPER [REC/DUB] Control Change (*A)

| 00 20 | 00dd dddd | MIDI LOOPER [PLAY] Control Change (*A)

p. 7

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 21 | 00dd dddd | MIDI LOOPER [STOP] Control Change (*A)

| 00 22 | 00dd dddd | MIDI LOOPER [CLEAR] Control Change (*A)

| 00 23 | 0000 00dd | MIDI Sync (0 - 3)

| | | INTERNAL, EXT (USB), EXT (MIDI), AUTO

| 00 24 | 0000 00dd | MIDI source of realtime message to output (0 - 2)

| | | INT, USB, MIDI

| 00 25 | 0000 00dd | MIDI In THRU into Out (0 - 3)

| | | OFF, USB, MIDI, U+M

|00 26 | 0000 00dd | USB In THRU into Out (0 - 3)

| | | OFF, USB, MIDI, U+M

|00 27 | 0000 000d | effect sw (0 - 1) (*1)

| | | OFF, ON

| 00 28 | 0000 000d | effect sw2 (0 - 1) (*1)

| | | OFF, ON

| 00 29 | 0ddd dddd | LOOP Level (0 - 100)

| | | 0 - 100

|00 2A | 00dd dddd | MIDI Time Control Change (*A)

| 00 2B | 0000 000d | Feedback loop sw (0 - 1)

| | | OFF, ON

-----------------------------------------------------------------------------------------------------------------

* System CTL Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0000 000d | TAP/CTL preference (0 - 1)

| | | PATCH, SYSTEM

| 00 01 | 0000 dddd | TAP/CTL Function (0 - 9)

| | | OFF, TAP, HOLD, WARP, TWIST, MOMENT, ROLL 1/2, ROLL 1/4, ROLL 1/8, FADE

| 00 02 | 0000 000d | CTL1 preference (0 - 1)

| | | PATCH, SYSTEM

| 00 03 | 0000 dddd | CTL1 Function (0 - 14)

| | | OFF, TAP, HOLD, WARP, TWIST, MOMENTARY, ROLL 1/2, ROLL 1/4, ROLL 1/8, FADE, EFFECT SW, BANK UP,

| | | BANK DOWN, LOOPonOff,

| | | LOOP CLR

|00 04 | 0000 000d | CTL1 Mode (0 - 1)

| | | MOMENT, TOGGLE

| 00 05 | 0000 000d | CTL2 preference (0 - 1)

| | | PATCH, SYSTEM

| 00 06 | 0000 dddd | CTL2 Function (0 - 14)

| | | OFF, TAP, HOLD, WARP, TWIST, MOMENTARY, ROLL 1/2, ROLL 1/4, ROLL 1/8, FADE, EFFECT SW, BANK UP,

| | | BANK DOWN, LOOPonOff,

| | | LOOP CLR

|00 07 | 0000 000d | CTL2 Mode (0 - 1)

| | | MOMENT, TOGGLE

| 00 08 | 0000 000d | EXP preference (0 - 1)

| | | PATCH, SYSTEM

| 00 09 | 0000 0ddd | Exp Pedal Function (0 - 6)

| | | OFF, TIME, FEEDBACK, TONE, E.LEVEL, MOD DEPTH, MOD RATE

| 00 0A | 0000 0aaa | Exp target min (0 - 23000)

| | | 0 - 23000

|| 0000 bbbb |

| | 0000 cccc |

| | 0000 dddd |

| 00 0E | 0000 0aaa | Exp target max (0 - 23000)

| | | 0 - 23000

|| 0000 bbbb |

| | 0000 cccc |

| | 0000 dddd |

| 00 12 | 0000 000d | TAP/CTL Mode (0 - 1)

| | | MOMENT, TOGGLE

| 00 13 | 0ddd dddd | TAP/CTL Rise time (0 - 100)

| | | 0 - 100

|00 14 | 0ddd dddd | TAP/CTL Fall time (0 - 100)

| | | 0 - 100

|00 15 | 0ddd dddd | CTL1 Rise time (0 - 100)

| | | 0 - 100

|00 16 | 0ddd dddd | CTL1 Fall time (0 - 100)

| | | 0 - 100

p. 8

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

|00 17 | 0ddd dddd | CTL2 Rise time (0 - 100)

| | | 0 - 100

|00 18 | 0ddd dddd | CTL2 Fall time (0 - 100)

| | | 0 - 100

|00 19 | 0ddd dddd | TAP/CTL Hold level (0 - 120)

| | | 0 - 120

|00 1A | 0ddd dddd | TAP/CTL Warp level (0 - 120)

| | | 0 - 120

|00 1B | 0ddd dddd | TAP/CTL Twist level (0 - 120)

| | | 0 - 120

|00 1C | 0ddd dddd | CTL1 Hold level (0 - 120)

| | | 0 - 120

|00 1D | 0ddd dddd | CTL1 Warp level (0 - 120)

| | | 0 - 120

|00 1E | 0ddd dddd | CTL1 Twist level (0 - 120)

| | | 0 - 120

|00 1F | 0ddd dddd | CTL2 Hold level (0 - 120)

| | | 0 - 120

|00 20 | 0ddd dddd | CTL2 Warp level (0 - 120)

| | | 0 - 120

|00 21 | 0ddd dddd | CTL2 Twist level (0 - 120)

| | | 0 - 120

-----------------------------------------------------------------------------------------------------------------

* MIDI PC MAP Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0000 000a | BANK: #1 PC: #001 (0 - 296)

| | | PATCH 01A - PACH 99C ……(*B)

| | 0000 bbbb |

| | 0000 cccc |

| 00 03 | 0000 000a | BANK: #1 PC: #002 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 00 06 | 0000 000a | BANK: #1 PC: #003 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 00 09 | 0000 000a | BANK: #1 PC: #004 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 00 0C | 0000 000a | BANK: #1 PC: #005 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 00 0F | 0000 000a | BANK: #1 PC: #006 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| : | :

| 00 7E | 0000 000a | BANK: #1 PC: #043 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 01 01 | 0000 000a | BANK: #1 PC: #044 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| : | :

| 01 7F | 0000 000a | BANK: #1 PC: #086 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 02 02 | 0000 000a | BANK: #1 PC: #087 (*B)

|| 0000 bbbb |

| | 0000 cccc |

| : | :

| 02 7D | 0000 000a | BANK: #1 PC: #128 (*B)

| | 0000 bbbb |

| | 0000 cccc |

p. 9

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 03 00 | 0000 000a | BANK: #2 PC: #001 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| : | :

| 05 7D | 0000 000a | BANK: #2 PC: #128 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| 06 00 | 0000 000a | BANK: #3 PC: #001 (*B)

| | 0000 bbbb |

| | 0000 cccc |

| : | :

| 08 7D | 0000 000a | BANK: #3 PC: #128 (*B)

| | 0000 bbbb |

| | 0000 cccc |

-----------------------------------------------------------------------------------------------------------------

* BANK BANK Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0000 000d | Structure (0 - 1)

| | | SERIES, PARALLEL

| 00 01 | 0000 000d | Output mode (0 - 1)

| | | MIX, A/B

|00 02 | 0000 000d | Sync (0 - 1)

| | | OFF, ON

| 00 03 | 0000 00dd | Feedback loop select (0 - 2)

| | | OFF, PATCH A, PATCH B

|00 04 | 0000 aaaa | Direct level adjust (0 - 150)

| | | 50% - 200%

| | 0000 bbbb |

-----------------------------------------------------------------------------------------------------------------

* BANK PATCH Parameters Offset Address

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

| 00 00 | 0ddd dddd | Patch Name1 (32 - 126)

| | | 32 - 126 [ASCII]

|00 01 | 0ddd dddd | Patch Name2 (32 - 126)

| | | 32 - 126 [ASCII]

|: | :

| : | :

| 00 0F | 0ddd dddd | Patch Name16 (32 - 126)

| | | 32 - 126 [ASCII]

|00 10 | 0000 dddd | Delay MODE (0 - 11)

| | | STANDARD, TERA ECHO, SLOW ATTACK, FILTER, SHIMMER, SFX, REVERSE, PATTERN, DUAL, VINT. DIGITAL,

| | | TAPE, ANALOG

| 00 11 | 0000 00aa | Delay Time (1 - 10000)

| | | 1ms - 10.0s

| | 0000 bbbb |

| | 0000 cccc |

| | 0000 dddd |

| 00 15 | 0000 00aa | BPM (15 - 2400000)

| | | Quarter Note=1.5 -=240000.0

|| 0000 bbbb |

| | 0000 cccc |

| | 0000 dddd |

| | 0000 eeee |

| | 0000 ffff |

| 00 1B | 0000 dddd | Note (0 - 12)

| | | 16th, 8th triplet, dotted 16th, 8th, quarter triplet, dotted 8th, quarter, half triplet,

| | | dotted quarter, half, whole triplet, dotted half, whole

|00 1C | 0ddd dddd | Feedback (0 - 100)

| | | 0 - 100

|00 1D | 0ddd dddd | Tone (0 - 100)

| | | -50 - +50

p. 10

-----------------------------------------------------------------------------------------------------------------

|Offset |

| Address | Description

-----------------------------------------------------------------------------------------------------------------

|00 1E | 0ddd dddd | Effect Level (0 - 120)

| | | 0 - 120

|00 1F | 0ddd dddd | Direct Level (0 - 100)

| | | 0 - 100

|00 20 | 0ddd dddd | Modulation Depth (0 - 100)

| | | 0 - 100

|00 21 | 0ddd dddd | Modulation Rate (0 - 113)

| | | 0 - 100, whole, dotted half, whole triplet, half, dotted quarter, triplet half, quarter,

| | | dotted 8th, triplet quarter,

| | | 8th, dotted 16th, triplet 8th, 16th

| 00 22 | 0000 000d | Carryover OFF/ON (0 - 1)

| | | OFF, ON

| 00 23 | 0000 00dd | EQ ON/OFF (0 - 3)

| | | OFF, PRE, FEEDBACK LOOP, POST

| 00 24 | 00dd dddd | EQ Total Level (0 - 40)

| | | -20dB - +20dB

|00 25 | 000d dddd | EQ Low Cut Filter Freq (0 - 17)

| | | FLAT, 20.0Hz, 25.0Hz, 31.5Hz, 40.0Hz, 50.0Hz, 63.0Hz, 80.0Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz,

| | | 315Hz, 400Hz, 500Hz, 630Hz, 800Hz

|00 26 | 00dd dddd | EQ Low Gain (0 - 40)

| | | -20dB - +20dB

|00 27 | 00dd dddd | EQ Low Mid Gain (0 - 40)

| | | -20dB - +20dB

|00 28 | 000d dddd | EQ Low Mid Freq (0 - 27)

| | | 20.0Hz, 25.0Hz, 31.5Hz, 40.0Hz, 50.0Hz, 63.0Hz, 80.0Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz,

| | | 400Hz, 500Hz, 630Hz, 800Hz, 1.00kHz, 1.25kHz, 1.60kHz, 2.00kHz, 2.50kHz, 3.15kHz, 4.00kHz,

| | | 5.00kHz, 6.30kHz, 8.00kHz, 10.0kHz

| 00 29 | 0000 0ddd | EQ Low Mid Q (0 - 5)

| | | 0.5, 1, 2, 4, 8, 16

| 00 2A | 00dd dddd | EQ High Mid Gain (0 - 40)

| | | -20dB - +20dB

|00 2B | 000d dddd | EQ High Mid Freq (0 - 27)

| | | 20.0Hz, 25.0Hz, 31.5Hz, 40.0Hz, 50.0Hz, 63.0Hz, 80.0Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz,

| | | 400Hz, 500Hz, 630Hz, 800Hz, 1.00kHz, 1.25kHz, 1.60kHz, 2.00kHz, 2.50kHz, 3.15kHz, 4.00kHz,

| | | 5.00kHz, 6.30kHz, 8.00kHz, 10.0kHz

| 00 2C | 0000 0ddd | EQ High Mid Q (0 - 5)

| | | 0.5, 1, 2, 4, 8, 16

| 00 2D | 00dd dddd | High EQ Gain (0 - 40)

| | | -20dB - +20dB

|00 2E | 0000 dddd | High Cut Filter Freq (0 - 15)

| | | 630Hz, 800Hz, 1.00kHz, 1.25kHz, 1.60kHz, 2.00kHz, 2.50kHz, 3.15kHz, 4.00kHz, 5.00kHz, 6.30kHz,

| | | 8.00kHz, 10.0kHz, 12.5kHz, 16.0kHz, FLAT

| 00 2F | 000d dddd | Low DAMP (0 - 20)

| | | -20dB - +0dB

| 00 30 | 000d dddd | Low DAMP FREQ (0 - 16)

| | | 20.0Hz, 25.0Hz, 31.5Hz, 40.0Hz, 50.0Hz, 63.0Hz, 80.0Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz,

| | | 400Hz, 500Hz, 630Hz, 800Hz

|00 31 | 000d dddd | Hi Damp GAIN (0 - 20)

| | | -20dB - +0dB

| 00 32 | 0000 dddd | Hi Damp FREQ (0 - 14)

| | | 630Hz, 800Hz, 1.00kHz, 1.25kHz, 1.60kHz, 2.00kHz, 2.50kHz, 3.15kHz, 4.00kHz, 5.00kHz, 6.30kHz,

| | | 8.00kHz, 10.0kHz, 12.5kHz, 16.0kHz

| 00 33 | 0ddd dddd | DUCK Sens (0 - 100)

| | | 0 - 100

|00 34 | 0ddd dddd | DUCK Pre Depth (0 - 100)

| | | 0 - 100

|00 35 | 0ddd dddd | DUCK Post Depth (0 - 100)

| | | 0 - 100

|00 36 | 0ddd dddd | Effect Pan (0 - 100)

| | | L50 - CENTER - R50

|00 37 | 0ddd dddd | Direct Pan (0 - 100)

| | | L50 - CENTER - R50

|00 38 | 0000 dddd | TAP/CTL Function (0 - 9)

| | | OFF, TAP, HOLD, WARP, TWIST, MOMENT, ROLL 1/2, ROLL 1/4, ROLL 1/8, FADE

| 00 39 | 0000 dddd | CTL1 Function (0 - 14)

| | | OFF, TAP, HOLD, WARP, TWIST, MOMENTARY, ROLL 1/2, ROLL 1/4, ROLL 1/8, FADE, EFFECT SW, BANK UP,

| | | BANK DOWN, LOOPonOff, LOOP CLR

|00 3A | 0000 000d | CTL1 Mode (0 - 1)

| | | MOMENT, TOGGLE

Other manuals for DD-500

Other BOSSCO Recording Equipment manuals

BOSSCO

BOSSCO JamStation JS-5 Operating and maintenance manual

BOSSCO

BOSSCO PRO SE-70 User manual

BOSSCO

BOSSCO ME-50B User manual

BOSSCO

BOSSCO GX-100 User manual

BOSSCO

BOSSCO SX-700 User manual

BOSSCO

BOSSCO BR-1600CD Instruction and safety manual

BOSSCO

BOSSCO BR-1600CD User manual

BOSSCO

BOSSCO GT-10 User manual

BOSSCO

BOSSCO AB-2 User manual

BOSSCO

BOSSCO Dr.Rhythm DR-110 User manual

BOSSCO

BOSSCO VF-1 User manual

BOSSCO

BOSSCO CL-50 User manual

BOSSCO

BOSSCO RSD-10 User manual

BOSSCO

BOSSCO JamStation JS-5 User manual

BOSSCO

BOSSCO MICRO BR User manual

BOSSCO

BOSSCO GS-10 User manual

BOSSCO

BOSSCO RC-505 User manual

BOSSCO

BOSSCO RC-600 User manual

BOSSCO

BOSSCO RC-505 User manual

BOSSCO

BOSSCO EQ-20 Advanced EQ User manual

BOSSCO

BOSSCO BR-1600CD Assembly instructions

BOSSCO

BOSSCO ME-20B User manual

BOSSCO

BOSSCO VE-5 User manual

BOSSCO

BOSSCO Boss BE-5M User manual

Popular Recording Equipment manuals by other brands

KV2 Audio

KV2 Audio 500 Series user guide

Robotics Technologies

Robotics Technologies microBus-Cam II installation manual

Seca

Seca 460 quick start guide

Cognex

Cognex MVS-8000 Series Hardware manual

Mect

Mect MPNC006 Series user manual

Bad Caf

Bad Caf THE LEASH operating manual

Strymon

Strymon NIGHTSKY user manual

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U user manual

Tews Technologies

Tews Technologies TPMC465 user manual

Honeywell

Honeywell Excel 50 user guide

SeaLevel

SeaLevel COMM+8.LPCI user manual

Arturia

Arturia AUDIOFUSE STUDIO user manual

Rukra

Rukra RK-1240 quick start guide

Samson

Samson SCOM owner's manual

Dynacord

Dynacord DPS260 owner's manual

Nice

Nice Core user manual

Pyle Pro

Pyle Pro PSS8 manual

RF-System

RF-System TinyGate Assembly and user's manual