Bosch BDS3210 User manual
Robert Bosch GmbH
72757 Reutlingen
Germany
www.bosch-ebike.com
0 275 U07 3S1 (2021.06) T / 26
en Original operating instructions
fr Notice d'utilisation d'origine
es Instrucciones de servicio originales
Ownerʼs Manual – The Bosch Drive System
Display Mount
BDS3210 | BDS3250 | BDS3620 | BDS3630
This manual contains important safety,
performance and service information.
Read and understand it along with the
information provided to you by your
bicycle manufacturer before using the
product, and keep it for reference.
Cette notice contient d'importantes
informationes sur la sécurité, les
performances et l'entretien. Lisez-les et
comprenez-les ainsi que les informations
fournies par le fabricant de votre vélo
avant d'utiliser le produit, et conservez-
les pour référence ultérieure.
Este manual contiene información
importante de seguridad, rendimiento y
mantenimiento. Léalo y asegúrese de
entenderlo junto con la información que
le ha facilitado el fabricante de su
bicicleta antes de usar el producto;
guárdelo a modo de referencia.
0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems
English – 1
Table of contents
Introduction ..................................................................................................................................... 2
About Warnings............................................................................................................................ 2
General Warnings ......................................................................................................................... 2
Using your Manual ........................................................................................................................ 3
Operating your Bosch Display Mount.................................................................................................... 4
Safety instructions........................................................................................................................ 4
Product description and specifications ............................................................................................ 5
Fitting......................................................................................................................................... 6
Maintenance and cleaning.............................................................................................................. 8
Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)
English – 2
Introduction
About Warnings
This manual contains many DANGER, WARNING,
and CAUTION indicators concerning the conse-
quences of failure to use, assemble, maintain, store,
inspect and dispose of a Bosch-equipped eBike in a
safe manner.
– The combination of the safety alert symbol and the
word DANGER indicates a hazardous situation
that, if not avoided, will result in death or serious
injury.
– The combination of the safety alert symbol and the
word WARNING indicates a hazardous situation
that, if not avoided, could result in death or serious
injury.
– The combination of the safety alert symbol and the
word CAUTION indicates a hazardous situation
that, if not avoided, could result in minor or moder-
ate injury.
General Warnings
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
death or serious injury.
Save all safety warnings and instructions for fu-
ture reference.
The term battery pack used in these operating in-
structions refers to all original Bosch eBike battery
packs.
WARNING
uThis manual contains important safety, perfor-
mance and service information. Read it before
you take the first ride on your new bicycle, and
keep it for reference. The manual can also be found
online at www.bosch-ebike.com.
uThis manual is intended to be read together with
the separate user manual provided with your bi-
cycle. Be sure to read all provided documents in-
cluding labels on the product before your first ride.
uRead ALL accompanying manuals before riding
the bike for the first time. Your Bosch Drive Sys-
tem comes with additional manuals and documents
provided by the manufacturer of the bicycle and
other components. Failure to read and understand
safety information can result in death or serious in-
jury.
uTake responsibility for your own SAFETY. If you
have any questions or do not understand some-
thing, consult with your dealer or the bicycle or
component manufacturer.
uSome eBike accessories may present a choking
hazard to small children. Keep these accessories
away from children.
CAUTION
uThe Bosch Drive System adds weight to your bi-
cycle which you may not be used to lift. Avoid in-
jury, use proper lifting techniques.
0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems
English – 3
Using your Manual
In addition to the functions outlined here, changes to
software relating to troubleshooting and functional
modifications may be introduced at any time.
Graphics
The bicycle shown in this manual may differ slightly
from your bicycle, but will be similar enough to help
you understand our instructions.
RIGHT-HAND and LEFT-HAND sides are determined
by facing in the direction the bicycle will travel when
going forward. When you see a broken line (------), the
item referred to is hidden from view.
Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)
English – 4
Operating your Bosch Display Mount
Safety instructions
Read all the safety information and
instructions. Failure to observe the
safety information and follow instruc-
tions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for fu-
ture reference.
uThe contact surfaces of the display holder may
become very hot (>140°F). Allow the contact
surfaces to adjust to the ambient temperature
before you touch them. This is particularly impor-
tant when using a SmartphoneGrip.
uKeep swallowable small parts away from small
children. There is a risk of serious injury.
uNever short-circuit the pins. The display holder
may be irreparably damaged and must then be re-
placed.
uEnsure that the contacts are free of dirt. By do-
ing this, you prevent malfunctions or damage.
uAfter a fall, check the display holder for sharp
edges. Replace it if required.
uDo not stand your bicycle upside down on its
saddle and handlebars if the on-board computer
or its holder protrude from the handlebars. This
may irreparably damage the on-board computer or
the holder. Also remove the on-board computer be-
fore placing the bicycle on a wall mount to ensure
that the on-board computer does not fall off or be-
come damaged.
uObserve all national regulations which set out
the approved use of eBikes.
uRead and observe the safety warnings and in-
structions in all operating instructions of the
eBike system and your eBike.
0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems
English – 5
Product description and specifications
Product Features Display Mount
(1)
(3)
(7)
(6)
(5)
(4)
(2)
(9)
(8)
(1) Display mount
(2) Adapter tray
(3) Clamp for holder
(4) Clamp screw
(5) Round rubber spacer
(6) 1-arm socket
(7) Screw for adjusting tilt
(8) Removal blocker
(9) Snap-in hook
(10) Connection cables
(11) Fastening screws for display mount
The display mount(1) can also be embedded in the
bicycle design.
Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)
English – 6
Intended use
The display holder is intended to establish the me-
chanical and electrical connection to a display or on-
board computer.
Only original Bosch eBike components can be con-
nected to the display holder.
A display holder is not required for an eBike system to
function.
Technical data
Display holder
Product code BDS3210
BDS3250
BDS3620
BDS3630
Output voltage V 4.75 to 5.4
Output current, max. A 1.5
Operating temperature °F 23 to 104
Storage temperature °F 50 to 104
Protection rating IP54
Fitting
Installation positions (seefigureA)
A➀ ➁ ➂
The 1-arm socket can be mounted at three different
positions on the handlebars:
– In front of the handlebars ➀
– Over the stem ➁
– In the triangle between the stem and handlebar ➂
Note: In order to ensure clean cable routing, the ap-
propriate display mount must be used for each of the
three different positions: The BDS3210 display
mount for in front of the handlebars (electrical con-
nections at the rear); the BDS3250 display mount for
over the stem or in the triangle between the stem and
handlebar (electrical connections at the front).
If you want to change the installation position and you
have the correct display mount(1), you must first re-
move the 1-arm socket(6) and re-mount it after-
wards.
Note: Please be aware that there are two different
handlebar diameters (31.8mm and 35mm). Your bi-
cycle retailer will help you to select the correct com-
ponents.
Mounting the display mount (seefigureB)
(1)
B
(2)
(10) (11)
(1) Display mount
(2) Adapter tray
(10) Connection cables
(11) Fastening screw for display mount
Insert the display mount(1) into the adapter tray(2).
Ensure that it is in the required installation position.
Secure the display mount(1) from below using the
screws(11). When doing so, be aware of the torque
specified on the adapter tray(2).
Connect the connection cables that come out of the
drive unit and the operating unit. It does not matter
which cable is connected to which connection for the
functions to work. When connecting the cables, en-
sure that the markings on the connector and on the
cable match.
0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems
English – 7
Securing on the handlebars (seefigureC)
C
(3)
(5)
(4) (7) (5)
(6)
(3) Clamp for holder
(4) Clamp screw
(5) Round rubber spacer
(6) 1-arm socket
(7) Screw for adjusting tilt
Note: The display holder must only be secured in the
cylindrical area of the handlebars and not in the ta-
pered area. To clamp a display in the center, the han-
dlebars must have a cylindrical area of at least 90mm
in width.
Open the clamp and bring the 1-arm socket(6), to-
gether with the round rubber spacer(5), into the re-
quired position. Gently tighten the clamp screw(4)
so that the 1-arm socket(6) can still move.
Adjust the tilt for the display mount by loosening and
tightening the screw(7). Preferably adjust the tilt
without the display or on-board computer.
In the connection between the 1-arm socket(6) and
the adapter tray, there are interlocking teeth, which
means that it is only possible to align the adapter tray
in predefined positions. Before tightening the
screw(7), make sure that the teeth engage in one an-
other correctly. In addition, be aware of the torque
specified on the 1-arm socket(6).
Bring the 1-arm socket(6) into its final position and
tighten the clamp screw(4). Be aware of the torque
specified on the 1-arm socket(6) here too.
Thanks to the round rubber spacer(5), it is possible
to move the 1-arm socket(6) in all directions.
Removal blocker
A device attached to the display holder can be se-
cured using the removal blocker(8). Usage is de-
scribed in the operating instructions for the respec-
tive device.
Bosch eBike Systems 0 275 U07 3S1 | (08.06.2021)
English – 8
Maintenance and cleaning
The display holder must not be cleaned with pressur-
ized water.
Use a soft cloth dampened only with water for clean-
ing. Do not use cleaning products of any kind.
uOnly have repairs performed by a certified bicy-
cle dealer.
After-sales service and advice on using
products
If you have any questions about the eBike system and
its components, contact an authorized bicycle dealer.
For contact details of authorized bike dealerships,
please visit www.bosch-ebike.com.
Disposal
Please return Bosch eBike components that are no
longer usable to an authorized bicycle dealer.
Do not dispose of eBikes and their components with
household waste.
0 275 U07 3S1 | (08.06.2021) Bosch eBike Systems
Other manuals for BDS3210
3
This manual suits for next models
3
Table of contents
Languages:
Other Bosch Rack & Stand manuals
Bosch
Bosch FMH 0000 A User manual
Bosch
Bosch UB-10DB Installation and operation manual
Bosch
Bosch PTA1000 User manual
Bosch
Bosch GTA 60 W Professional User manual
Bosch
Bosch VG4-A-9543 User manual
Bosch
Bosch MSGZWML User manual
Bosch
Bosch TS2000 Assembly instructions
Bosch
Bosch T4B Assembly instructions
Bosch
Bosch 303-435 User manual
Bosch
Bosch HMP 0001 A User manual
Bosch
Bosch UMM-LW-20B Installation instructions manual
Bosch
Bosch PTA 2400 User manual
Bosch
Bosch GCR 350 User manual
Bosch
Bosch GTA 2600 Professional User manual
Bosch
Bosch GTA 600 Professional Operation instructions
Bosch
Bosch S 500 A PROFESSIONAL User manual
Bosch
Bosch FRK 0019 A User manual
Bosch
Bosch B12 User manual
Bosch
Bosch TS1014 User manual
Bosch
Bosch GTA 600 Professional User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
