Bosch B12 User manual

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450

Dimensions (HxWxD) 9.25 in x 8.63 in x .5 in (23.5 cm x 21.92 cm x 1.27 cm)

3 Speciﬁcations

Callout Description

1Mounting plate hooks

2Plate mounting hole

2.4 Securing mounting skirt in enclosure

Complete the installation by resting the hook tabs on the mounting plate

hooks within the enclosure. Secure the lock-down tab to the plate mounting

hole with the screw provided in this kit. Refer to Figure 1.1 and Figure 2.3.

11

2

Figure 2.3: Universal enclosure

Reading Bosch Security Systems, Inc. Product Date Codes

For Product Date Code information, refer to the Bosch Security Systems, Inc.

Web site at: http://www.boschsecurity.com/datecodes/.

en Installation Guide

Mounting Plate for D8103

B12

© 2013 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450 F.01U.262.949 | 03 | 2013.02 | 2

2.2 Place the device

Lay the mounting plate on a ﬂat surface with the standoffs facing up. Set

the device on top of the standoffs as shown in Figure 2.2. Make sure the

holes in the corners of the device are aligned with the openings at the top

of each of the standoffs.

Figure 2.1: Standoff attachment

2.3 Secure the device

Secure the device to the mounting plate with self-threading screws as

shown in Figure 2.2. (Screws provided separately with the device being

mounted.)

Figure 2.2: Device attachment to mounting plate

1

2

1

3

22

2

Callout Description

1 Hook tabs

2 Support post

3 Lock down tab

Figure 1.1: BI2 Mounting Plate

1 Overview

The B12 Mounting Plate is required when mounting B5512/B4512 Control

Panels, the B520 Aux Power Module, or other similar devices in D8103 Uni-

versal Enclosures, D8108A Attack Enclosures, or D8109 Fire Enclosures.

This kit includes one B12 Mounting Plate and one screw to secure the lock

down tab.

2 Mounting

To mount a device to the B12 Mounting Plate, complete the following steps.

2.1 Attach standoffs

Snap four plastic standoffs onto the four support posts as shown in Figure

2.1. (Standoffs provided separately with the device being mounted.)

NOTICE!

Do not

attach the standoffs with screws at this time.

Other Bosch Rack & Stand manuals

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 