Bosch 681680 Reference manual

Table of contents

Other Bosch Kitchen Appliance Accessories manuals

Popular Kitchen Appliance Accessories manuals by other brands

JUNO

JUNO SCC2635BR Replacement

Viking

Viking VGC530 installation guide

KitchenAid

KitchenAid KSMFGA quick start guide

KitchenAid

KitchenAid KSMFGA manual

Maytag

Maytag AG202MG - Gas Burner Module parts list

Orava

Orava BN-30 instruction manual

TurboChef

TurboChef ENCORE Price list

TurboChef

TurboChef CON-3002 Replacement guide

Kenwood

Kenwood KAT91.000CL instructions

Miele

Miele DUU 1000-2 Operating and installation instructions

Tramontina

Tramontina 80202/005DS Use & care instructions

Dualit

Dualit Tamper instruction manual

Kenmore

Kenmore 22009 Installation instruction

Maytag

Maytag 4396395T installation instructions

eta

eta 0028 96000 Instructions for use

KitchenAid

KitchenAid 5KSMSFTA product manual

Pro-Fondi

Pro-Fondi Pro-Fondi instruction manual

Samsung

Samsung MA-TK8020 Series installation instructions

TECHNICAL SERVICE BULLETIN

Non-Convection Microwave/Trim Mounting Kit (681680)

This Non-Convection Microwave/Trim Mounting Kit has been designed to improve the way in which the non-

convection microwave is secured to the trim kit base. The kit is available for the following SKUs:

BA268810 BA268830 HMT5020 HMT5050 HMT5060

HMT5720 HMT5750 HMT5760 MET27EB MET27ES

MET30EB MET30ES

Parts included

Latches

Base supports

Base assembly

Rear slots

#8-18 Screws

½” Drywall screws

Self-tapping bolts

Anti-tip tabs

Follow the instructions below to uninstall the original trim kit parts and install the parts included in the service kit.

Uninstall the Original Trim Kit Parts

1Remove trim kit frame.

2Slide microwave forward until power cord and receptacle

can be reached.

3Unplug power cord.

4 Remove 2 screws from base assembly. Remove and

discard base.

Assemble and Install the Mounting Kit

BSH Home Appliances Corporation

5551 McFadden Ave., Huntington Beach, CA 92649

58300000134755 ABZ EN A - 9000390620

October 2008

5By hand, bend the right and left anti-tip tabs on the

base assembly upward to a 90°angle.

6Install base assembly. With drill or Phillips screwdriver,

insert two ½” screws (circled below) into existing holes

for proper alignment. Insert four remaining ½” screws.

7 Remove all contents from inside microwave, including

glass tray and plastic guide. Lay microwave on pad or

blanket, and carefully flip the unit upside down.

8Using pliers, remove plastic feet from bottom of

microwave.

9 Insert latch in front of each base support.

10 With a T20 torx screwdriver, secure base supports to

microwave using 4 self-tapping bolts. Insert bolts into

existing holes in bottom of microwave.

11 After plugging power cord back in, slide microwave

back into cabinet cutout. Be sure base supports fit

securely into rear slots.

12 Insert Phillips-head #8-18 screw into front of each base

support (screws will thread into 90° anti-tip tabs).

13 Reattach exterior trim kit frame.

For further assistance, please contact our technical

assistance team at 1-800-444-9091.

Visit QuickFinder at http://portal.mch.bshg.com/portal