Bosch FPA-5000 User guide

Modular fire panel

FPA‑5000 | FPA‑1200

en System Information

Modular fire panel Table of contents | en 3

Bosch Sicherheitssysteme GmbH System Information 07.2020 | 12.0 | F.01U.028.089

Table of contents

1Notes 6

2Product Description 6

2.1 FPA-1200 Fire Panel and FPA-5000 Fire Panel with Functional Modules 6

2.2 Panel controller 11

2.2.1 MPC Panel Controller 11

2.2.2 FPE-8000-SPC | FPE-8000-PPC | FPE-2000-SPC | FPE-2000-PPC panel controller 13

2.3 Remote keypad 16

2.3.1 FMR-5000-C Remote keypad 16

2.3.2 FPE-8000-FMR Remote keypad 16

2.4 Housings for Frame Installation 18

2.5 Housings for Wall Mounting 21

2.6 System Overview 22

2.7 Networking 27

2.8 Connection to BIS 27

2.9 Connecting a Voice Alarm System 27

3Planning 28

3.1 General Information 28

3.2 Detection Points 29

3.3 Address Setting 30

3.4 Topologies in Local Security Network 31

3.5 Failure handling in Local Security Network 33

3.6 Redundancy 34

3.7 Achievable Cable Length with LSN 0300 A 36

3.8 Achievable Cable Length with LSN 1500 A 38

3.9 Examples of Housing Equipment 42

3.10 Configuration of BCM Battery Controller Module 43

3.11 Protective earth and equipotential bonding 47

4Installation 47

4.1 General Information 47

4.2 Quick Installation Guide 48

4.3 Installation of Housing Components 49

4.3.1 Installation Instructions for Housing 50

4.3.2 Installation Dimensions for Wall Mounting Housing 52

4.3.3 Installation Dimensions for Frame Installation Housing 58

4.3.4 Installation Dimensions for Mounting Frames 61

4.3.5 Installation Kits for 48 cm (19”) Racks 64

4.4 Accessories for Housing 66

4.4.1 RLE 0000 A Junction Board 66

4.4.2 HMP 0003 A Mounting Plate for Mounting Frame 68

4.4.3 FPO-5000-EB Earth Bar 70

4.5 Power Supply Brackets 70

4.5.1 FPO‑5000‑PSB‑CH Power Supply Bracket 72

4.5.2 FPO-5000-PSB1 Power Supply Bracket 76

4.6 UPS 2416 A Universal Power Supply 24 V/6 A 77

4.7 Panel Rails 83

4.7.1 PRS-0002-C Panel Rail Short for 2 Modules 83

4.7.2 PRD 0004 A Panel Rail Long for 4 Modules 85

4.7.3 Panel Rail Installation 86

4en | Table of contents Modular fire panel

07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

4.8 MPC Panel Controller 89

4.9 Functional Modules 100

4.9.1 Installation and Removal 100

4.9.2 ANI 0016 A Annunciator Module 101

4.9.3 BCM‑0000‑B Battery Controller Module 101

4.9.4 CZM 0004 A 4 Zone Conventional Module 106

4.9.5 ENO 0000 B Fire Service Interface Module 107

4.9.6 FPE‑5000‑UGM Interface Module 108

4.9.7 IOP 0008 A Input/Output Module 109

4.9.8 IOS 0020 A 20 mA Communication Module 110

4.9.9 IOS 0232 A RS232 Communication Module 111

4.9.10 LSN 0300 A LSN improved Module 300 mA 112

4.9.11 LSN 1500 A LSN improved Module 1500 mA 113

4.9.12 NZM 0002 A Notification Appliance Zone Module 115

4.9.13 RMH 0002 A Relay Module for Mains Voltage 116

4.9.14 RML 0008 A Relay Module for Low Voltage 117

4.9.15 Accessories for Functional Modules 118

4.10 Cable Sets 119

4.11 Extended line monitoring (VdS 2540, VdS 2543) 120

4.12 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 120

4.13 THP 2020 A Thermal Printer 122

4.14 Remote Keypad 126

5Commissioning 141

5.1 Notes 141

5.2 Documentation 141

5.3 Quick Guide for Commissioning 141

5.4 Functional Test 141

5.4.1 Preparation 141

5.4.2 Testing the Power Supply 142

5.4.3 Testing the Conventional and LSN Functions 142

5.4.4 Testing the Addressing/Activation 143

6Maintenance and Service 143

6.1 Warranty 143

6.2 Repair 143

6.3 Disposal 143

6.4 Additional Documentation 143

7Technical Data 144

7.1 System Limits 144

7.2 Power loss of components 145

7.3 Housing and Accessories 146

7.3.1 Housings for Frame Installation 146

7.3.2 Housings for Wall Mounting 146

7.3.3 PRS-0002-C Panel Rail Short for 2 Modules 147

7.3.4 PRD 0004 A Panel Rail Long for 4 Modules 147

7.3.5 FPO‑5000‑PSB1/FPO‑5000‑PSB‑CH Power Supply Brackets 147

7.3.6 UPS 2416 A Universal Power Supply 24 V/6 A 148

7.4 Panel Controller and Remote Keypad 148

7.4.1 MPC 148

7.4.2 Remote Keypad 149

Modular fire panel Table of contents | en 5

Bosch Sicherheitssysteme GmbH System Information 07.2020 | 12.0 | F.01U.028.089

7.4.3 FSP-5000-RPS Programming Software 149

7.5 Functional Modules 149

7.5.1 ANI 0016 A Annunciator Module 150

7.5.2 BCM‑0000‑B Battery Controller Module 150

7.5.3 CZM 0004 A 4 Zone Conventional Module 151

7.5.4 ENO 0000 B Fire Service Interface Module 151

7.5.5 FPE‑5000‑UGM Interface Module 152

7.5.6 IOP 0008 A Input/Output Module 152

7.5.7 IOS 0020 A 20 mA Communication Module 152

7.5.8 IOS 0232 A RS232 Communication Module 152

7.5.9 LSN 0300 A LSN improved Module 300 mA 153

7.5.10 LSN 1500 A LSN improved Module 1500 mA 153

7.5.11 NZM 0002 A Notification Appliance Zone Module 154

7.5.12 RMH 0002 A Relay Module for mains voltage 154

7.5.13 RML 0008 A Relay Module for Low Voltage 155

7.6 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 155

7.6.1 FPP‑5000 Kit 155

7.6.2 FPP‑5000‑TI Trouble Interface 156

7.6.3 FPP‑5000‑TI13 Communication Interface 156

8Appendix 156

8.1 Options with requirements under EN 54‑2:1997/A1:2006 156

8.2 Component Overview 157

8.2.1 Frame Installation Housings, Mounting Frames and Installation Kits 157

8.2.2 Wall Mounting Housings and Installation Kits 157

8.2.3 Accessories for Housing 158

8.2.4 Panel Rails 158

8.2.5 Power Supply Units, Power Supply Brackets, Batteries 158

8.2.6 Panel Controller/Remote Keypad 159

8.2.7 Functional Modules 161

8.2.8 Cable Sets 161

8.2.9 Thermal Printer 161

8.2.10 ETH/FOC Adapters 162

8.3 Additional documentation 162

8.3.1 Frame installation housings, mounting frames and installation kits 162

8.3.2 Wall mounting housings and installation kits 163

8.3.3 Accessories for housing 163

8.3.4 Panel rails 164

8.3.5 Power supply units 164

8.3.6 Panel controller | Remote keypad 164

8.3.7 Functional modules 165

8.3.8 Cable sets 166

8.4 Special Applications 167

8.4.1 Controlling Extinguishing Systems 167

Index 168

6en | Notes Modular fire panel

07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

1 Notes

Danger!

The fire panel and devices contain live components.

Touching live components can result in electric shock.

Disconnect the power supply before all maintenance or installation work.

Notice!

Installation must only be carried out by authorized specialist personnel.

Notice!

Have maintenance and inspection work carried out regularly by trained, qualified personnel.

Bosch recommends a functional and visual inspection at least once a year.

Notice!

The fire panel is designed for indoor installation.

After installing batteries, the poles must be masked. Appropriate masking strips are included

with the housing in which the batteries are installed.

Use fuses complying with national regulations to protect the power lines.

Notice!

Batteries must not be disposed of in household waste. Please take used batteries to the local

collection points. See www.boschsecurity.com/xc/en/weee/ for further information.

Notice!

Consider national and local regulations when installling and operating the fire system.

2 Product Description

The fire panel is easily adapted to local requirements and regulations. Due to the different

functional modules, country-specific characteristics are accommodated in the connection just

as quickly as the respective alarm protocol.

2.1 FPA-1200 Fire Panel and FPA-5000 Fire Panel with Functional

Modules

Compare FPA-1200 fire panel to FPA-5000 fire panel:

FPA-1200 FPA-5000 (MPC-xxxx-C)

Ethernet interface to

Building management

system (BIS, FSM-5000-

FSI)

• •

Modular fire panel Product Description | en 7

Bosch Sicherheitssysteme GmbH System Information 07.2020 | 12.0 | F.01U.028.089

FPA-1200 FPA-5000 (MPC-xxxx-C)

UGM-2040 Hierarchy

panel

• •

Voice alarm system

(Smart Safety Link)

• •

Modularity (maximum number)

LSN 0300 A modules 4 32

LSN 1500 A modules 11

Functional modules

(including LSN modules)

6 46

Panel redundancy

Redundant panel

controller

•

Network

Panel network remote keypads panels, remote keypads, servers

Max. number of nodes 4 (1 panel, 3 keypads) 32

The fire panel is available with two different types of housings:

– Wall mount housing

– Frame mount housing

The slim wall mount housings are for mounting directly to the wall. Frame mount housings

require an additional frame between the housing and the wall. The frame lets space for e.g.

cabling, media converters, and larger batteries. Special installation kits also allow installation

in 19" racks.

The panel controller is the central component of the fire panel. A color display shows all

messages. The touch screen is for operation of the entire system. The user-friendly interface

adapts to various situations. This causes correct operation that is simple and clear as well as

targeted and intuitive.

The fire panel is configured on a laptop using the FSP-5000-RPS programming software. The

programming software enables further adaptation, e.g. to country-specific requirements and

regulations.

The panels can be networked with one another and with the remote keypad using the Ethernet

and the CAN bus interfaces.

The fire panel can be connected to the Bosch Hierarchy panel (UGM) and thus integrated into

large-scale systems.

Connection to the Bosch Building Integration System BIS is possible via an Ethernet interface

using an OPC server. The FSM-5000-FSI Software Interface Package allows custom integration

to external management systems.

The panel can be connected to a voice alarm system. The Praesideo or PAVIRO system can be

connected using an Ethernet interface. Plena voice alarm system can be connected via an

RS232 module.

The remote keypad allows decentralized operation of the panel or the panel network.

System Overview

The figure below shows an example configuration:

8en | Product Description Modular fire panel

07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

TUO

8 9

5 6

2 3

PQRS TUV WXYZ

GHI JKI MNO

ABC DEF

F i r e

Test

City Tie

City Tie Fa ult

Ground F ault

Battery F ault

Power

Trouble

Signal S ilence

Bypass ed

Superv isory

N AC 1 N AC 3N A C 7NA C

N A C 5

N A C 2N A C 4N A C 8NA C

N A C 6

PS 2PS 3 PS 5PS

PS 4

BC B A T

BA T 2

10 A

25 A

Bridge 2-3 Bridge 3-4 Bridge 4-5 Bridge 5-6

- - - --+ + + ++

- + - +

BA T 1 AB AT 1 B

NETZEIN

NETZSTROM

Störung

BATTERIE1

Störung

BATTERIE2

Störung

FAULT

MAIN

+ - BAT1

+ - BAT2

+ - BAT1

+ - +-

FAULT AC

FAULT

AUX3

+ - AUX4

+ -

AUX2

+ -

AUX1

+ - AUX5

+ - AUX6

+ -

BCM0000A

L S N 0 3 0 0 A

AU X 1

+ - L S N 1

a -b + AU X 2

+ - L S N 2

a -b +

ZONE4

Störung

ZONE3

Störung

ZONE2

Störung

ZONE1

Störung

CZM0004A

AUX1

+ - OUT1

+- IN1

+- AUX2

+ - OUT2

+- IN2

AUX3

+ - OUT3

+- IN3

+- AUX4

+ - OUT4

+- IN4

ANI0016A

F2F1

NC1

NO1

NC2

NO2

FB1

+-FB2

+ -

RELAIS2

Störung

RELAIS1

Störung

RMH0002A

OUT3

OUT2

OUT4

OUT6

OUT5

OUT7

GND

OUT8

GND

IN1

IN3

IN2

IN4

IN6

IN5

IN7

GND

IN8

GND

OUT1

IOP0008A

110

Figure2.1: Example configuration

Position Description Position Description

1 Functional modules 7 Power supply unit

2 Panel controller 8 Housing (in this case: HCP0006A)

Modular fire panel Product Description | en 9

Bosch Sicherheitssysteme GmbH System Information 07.2020 | 12.0 | F.01U.028.089

Position Description Position Description

3 Distributor, optional (RLE) 9 Panel rail, long

4 Fire brigade peripheral module 10 Batteries

5 Panel rail, short 11 Remote keypad

6 Power supply bracket

Functions

The panel provides complete flexibility and thus customized solutions for any application.

The configuration of the components is supported by Safety Systems Designer for fire alarm

systems. The software provides information about the size and number of housings, the

modules and the energy balance calculation.

Depending on specific requirements, the planning involves choosing from the following

options:

–Housing type (frame and wall mounting)

– Selection of a basic housing

– Extension housing, optional

– Power supply housing, optional

– Installation kits (optional) for installation in 482.6mm (19") racks

–Panel controller

– Selection from a range of language versions

–Panel rail

– Selection according to housing type and/or number of functional modules required

–Power supply

– Batteries

– Power supply units for additional power supply

– Power supply brackets

The power supply brackets on frame installation housings are preinstalled ex works;

for wall-mounted housings, power supply brackets can be selected as required.

–Thermal printer

– THP2020A Thermal Printer

The thermal printer is used to document operating procedures on the panel, as well

as alarm and fault messages. Plain text can also be printed. Programming is carried

out via the programming software FSP-5000-RPS.

–Additional accessories

– Front doors

– Cable sets for special applications.

–Functional modules

Functional modules are independent, encapsulated units that can be inserted into any

slot on the panel. The power supply and the data traffic with the panel are therefore

provided automatically. The module is identified by the panel with no further settings and

operates in the default operating mode (plug and play).

Wiring to external components is performed using compact connector/screw terminals.

After a replacement, only the connectors need to be reinserted; there is no need for

extensive rewiring.

Module Description Function

ANI 0016 A Annunciator module Indicating system statuses, with 16 red and 16

yellow freely programmable LEDs

10 en | Product Description Modular fire panel

07.2020 | 12.0 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

Module Description Function

BCM-0000-B Battery controller

module

Controlling the power supply to the panel and the

battery charge level

CZM 0004 A Conventional zone

module

Connecting conventional peripheral devices using

four monitored conventional lines

ENO 0000 B External notification

module

Connecting fire service equipment complying with

DIN 14675

FPE-5000-UGM Module interface to

UGM

Connection to UGM systems

IOP 0008 A Input-output module Individual displays or flexible connection of various

electrical devices, with 8 independent digital inputs

and 8 open collector outputs

IOS 0020 A Communication

module, 20mA

With S20 and RS232 interfaces

IOS 0232 A Communication

module, RS232

Connection of two devices using two independent

serial interfaces, e.g. Plena or a printer.

LSN 0300 A LSN bus module

300mA

Connection of an LSN loop with up to 254LSN

improved elements or 127LSN classic elements at a

maximum line current of 300mA

LSN 1500 A LSN bus module

1500mA

Connection of an LSN loop with up to 254LSN

improved elements at a maximum line current of

1500mA or 127LSN classic elements at a maximum

line current of 300mA

NZM 0002 A Notification

appliance zone

module

Allows connection of two conventional, monitored

notification appliance circuit lines

RMH 0002 A Relay module high-

voltage

Monitored connection of external elements with

feedback, with two changeover contact relays

suitable for switching mains voltage

RML 0008 A Relay module low-

voltage

For low voltage switching, with eight changeover

contact relays

– Fire brigade peripheral module

A fire brigade peripheral module is connected via FPE-5000-UGM or via IOS 0020 A

functional module. The fire brigade peripheral module FMF-ADP-TTY connects fire service

devices e.g. a Fire service operating panel or a Fire brigade information center to the fire

panel.

Notice!

Safety Systems Designer can be used to plan fire alarm systems that conform to the relevant

limits (e.g. in terms of cable length and power supply).

Other manuals for FPA-5000

This manual suits for next models

Table of contents

Other Bosch Fire Alarm manuals

Popular Fire Alarm manuals by other brands

Zeta Alarm Systems

Zeta Alarm Systems INFINITY ID2 installation manual

System Sensor

System Sensor 22051TLE-RF-26 Installation and maintenance instructions

Pittway

Pittway Notifier AM2020 troubleshooting guide

Ampac

Ampac ZoneSense user manual

Kidde

Kidde VM-1 Technical reference manual

LST

LST SIM016-3 Specification sheet

Fireboy- Xintex

Fireboy- Xintex FBD-MZ Owner's Manual & Installation Instructions

bolid

bolid S2000-IP-03 instruction manual

GST

GST DI-9204 Installation

E2S

E2S BExTBG05D instruction manual

Notifier

Notifier UZC-256 installation manual

Fire-Lite Alarms

Fire-Lite Alarms MS-2 instructions

Siemens

Siemens FDOOT221 Technical manual

hyfire

hyfire HY5000 Series install guide

FlameStop

FlameStop PFSIFP8 Installation and operation manual

Radionics

Radionics Radionics 9124 user guide

UniPOS

UniPOS FD 7120 instruction manual

FIREWOLF

FIREWOLF FW-C01224 owner's manual