Bombfrog DW-15 V2 User manual
DW-15 (V2)
user manual
1.0 Introduction
Thank you for choosing the BOMBFROG DW-15 (V2) watch. This
watch contains major functions as below:
Current time, alarm, chronograph, timer, pacer, dual time;
Pedometer, calorie counter, sport mileage;
Weather forecast, thermometer, altimeter, barometer,
compass;
Detailed specification please see attached appendix.
In order to operate and perform the watch well, please follow the
below instructions:
Read the instruction carefully and keep it well before usage;
Avoid using the watch in extreme conditions;
Do not disassemble the watch yourself;
Clean the watch with one soft cloth, do not use the organic
solvent;
Keep the watch away from the magnet or magnetic objects;
Keep the watch in one dry place when not in use.
2.0 Button Introduction
LIGHT(A)：switch on EL back light for 3 seconds/zero-clear/delete data;
MODE(B)：function convert/press and hold will start setting;
ALTI-(C)：altimeter mode/decrease;
COMP(D)：compass mode;
BARO+(E)：barometer mode/increase.
3.0 Function Diagram
4.0 Current Time Mode—Function Display
Function Display
Top: weather forecast and press E button for 2 seconds will convert
the following 4 functions,
Weekday
Temperature
Altitude tendency chart
Sea level air pressure tendency chart
Medium: time
Bottom: date
NOTE: If you want to achieve one accurate atmosphere temperature,
you need to take the watch down for 20-30 minutes, in order to
eliminate the influence of body temperature.
4.1 Current Time Mode-Weather Forecast
Weather Forecast
With the change of air pressure before, the watch will achieve the
corresponding weather forecast, but it will be different from the
actual weather;
How to Display the Weather in Future
The watch will display the weather in future by the following 4 icons:
Sunny
Partly cloudy
Cloudy
Rainy
This function only could display under current time and dual time
mode.
4.2 Current Time Mode-Current Time Setting
How to Set the Current Time
1. Under time mode, press and hold B button until the flashing icon
“SET” and second digit appear;
2. Press B button to convert;
3. When the digit of second is flashing (selected), press E/C button to
clear the digit to “00”.
4. When the other digit of minute, hour, year, month or day is flashing
(selected), press E/C button to increase/decrease the digit (press and
hold button to change faster);
5. When the month/day and 12/24 hour format is flashing, press E/C
button to convert;
6. When the LCD contrast is flashing, press E/C button to
increase/decrease the contrast level (1-10);
7. When the beep is flashing, press E/C button to switch ON/OFF it;
8. Press and hold B button to save and exit.
5.0 Pedometer Mode
Under time mode, press B button to enter into pedometer
mode and the step value will be 0;
Under pedometer mode, press A button, EL back-light will last
3 seconds;
Press and holdA button for 3 seconds to zero-clear the step
value;
Press B button to enter into pedometer storage mode, press
and hold B button to enter into pedometer setting mode;
Press C button, nothing will happen; press and hold C button
to switch ON/OFF pedometer；
Press D button, nothing will happen;
Press E button to convert the modes sequentially as below:
Step→Mileage→Calorie→Sport time→Step
NOTE:
1. The step icon will appear if pedometer starts;
2. Only under pedometer mode, press and hold C button to
switch ON/OFF pedometer.
5.1 Pedometer Setting Mode
Under pedometer mode, press and hold B button to enter into
setting and reviewing user information, the default setting of
metric system will flash;
Press B button to convert the modes sequentially as below:
Metric/Imperial System→Step distance→Weight→Metric/Imperial
System
Table of contents
Other Bombfrog Watch manuals
