BOMAKER SiFi User manual
www.bomaker.com
User Manual
Model: SiFi
FCCID:2ADQABTW-V2 MIC No : 214-104462
Table of Contents
1. Introduction.........................................................................................01
1.1 Package Content
1.2 Product Diagram
1.3 Specifications
2. How to Wear......................................................................................04
2.1 How to choose Eartips’ sizes
3. How to Charge..................................................................................05
3.1 Charging the Earbuds
3.2 Charging the Case
4. How to Pair.........................................................................................06
4.1 Stereo Mode
5. Button Controls and Voice Notifications....................................07
5.1 Turn the earbuds on/off
5.2 Button Controls
5.3 Voice Notifications
5.4 LED Indicators
6.Trouble-Shooting and Support.......................................................12
6.1 Care and Maintenance
6.2 Warranty and Support
6.3 Statement
1. Introduction
Thank you for choosing BOMAKER SIFI True Wireless Bluetooth Earphones.
Please read the manual carefully, and keep it for further reference. If you need
any assistance, please contact our customer support team by emailing
1.1 Package Content
1 x Bomaker SIFI Bluetooth Earbuds
1 x USB Charging Cable
4*3 Interchangeable Eartips(S/M/L)
1 x Charging Case
1 x User Manual
Eartips
M
L
S
1.2 Product Diagram
Multifunctional Button
LED Indicator
Charging Contractor
Microphone
1
2
3
4
Charging Case
Charging Slot
USB Charging Port
Charging Case Indicator
5
6
7
8
13 42 8 65 7
1.3 Specifications
Bluetooth Version
Waterproof
Bluetooth Profile
Working Distance
Band of use
Battery Capacity
Working Temperature
Battery Life
Charging Case charged
the earphones
Earbud Charging Hour
Earbud Dimension/Weight
Charging Case Dimension/Weight
BT5.0
IPX 7
HFP,HSP,AVRCP,A2DP
≥10m/33 feet
2.4GHz Band (2.4 GHz ~ 2.48 GHz)
Earphone:3.7v/50mAh;
Charging Case: 3.7v/ 500mAh
0℃～45℃
6H for Music(at 70% volume),
5H for Calling(at 70% volume)
4 Times (Charging Case Full Battery)
About 1.5-2H for Earphone,
2.5H for Charging Case
L*W*H = 0.8*0.5*1.1 inch / 4.0g
L*W*H = 2.6*1.3*1.2 inch / 32g
2. How to wear
Insert the earbuds into your ear and rotate to fit comfortably. Ensure the
microphone is putting towards your mouth.
2.1 How to choose Eartips’ Sizes
For the optimal audio experience, it’s recommended to try each of the
different Eartips’ sizes. The fit should feel tight and secure in your ear. The
medium Eartips is pre-mounted on the earbuds. Ensure the Eartips is firmly
attached(normally the medium sizes are suitable for 75% of people).
ML
S
3.2 Charging the case
3.1 Charging the Earbuds
3. How to charge
Fully charge your Bomaker earbuds before pairing.
Placing the earbuds into the charging case and close the lid to charge. The
Battery LED Indicator inside the charging case will keep flashing.
It takes approx. 1.5 H to fully charge the earbuds.
Use included USB charging cable to charge the case. Do not use any USB
charging adapter over 5V 1A. Do not use any non-certificated charger to
charge the earbuds and the charging case.
It takes approx. 2.5H to fully charge the charging case.
4. How to Pair
4.1 Stereo Mode
1.Take out both earbuds from the charging
case. Right earbud will flash red and blue
LED light alternately. "Left" earbud will not
flash any light.
2. Go to your Bluetooth menu and select
“SIFI”
3. You will hear “connected” once paired
with phone successfully.
Factory Reset (Try the following steps if you fail building connection between
two earbuds, or between earbuds and device)
-Power off both earbuds, then hold for 10 sec to go to factory settings.
How to enter into Mono Mode?
The R and L earbuds can both work separately as a single earbud (Mono
Mode), or use together as a pair of stereo earbuds (Stereo Mode). To use in
different modes, you need to follow different pairing steps.
Put one earbud into charging case to power it off, then use another earbud
as mono mode.
Fail re-entering stereo mode.
-There’re two ways to go to Stereo Mode.
-Firstly, take out both earbuds from charging case, the left earbud will be
paired to right earbud automatically, then connect to your phone via
Bluetooth.
-Secondly, power off both earbuds, hold and press for 10 sec to go to factory
settings , then both earbuds turn to blue light and enter stereo mode
successfully when the right earbud flashes blue and red.
(Please note that the pairing history Will be cleared after factory setting )
Take both earbuds from charging case to automatically power it on. Put
earbuds back into charging case to power it off automatically.
It can be powered on by manually pressing right earbuds until red and blue
lights flashing.
5.1 Turn the earbuds on/off
5. Controls and Voice Notification
LED
Multifunctional Button
Table of contents
Languages:
