MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
MENU Parameter Setting
1211
In the state of power on, press the M button twice
enter the parameter setting menu. Press M button
twice again to exist setting state (time interval must
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select the adjusting items. Press M button,
the parameter to be set will be blinking. If you want
to adjust related parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to back to the main menu. In the function
selection interface, press M button twice consecutive-
ly or select EXIT to exit menu.
8.1 Brightness：Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Please press M to confirm or press POWER to cancel the settings.
After setting the parameters, please press M to confirm and return to the main
menu.
8.5 Start password open and set: Press M button to enter password setting
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
enter the password selections enter the new password
8.6 Information：Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
Information display
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Input right password to enter the submenu. The
password is 4 digits and the default value is “2112”.
password. The options and functions are as follows.
☆
☆
☆
☆Speed magnets number:1~88
☆Assist level parameter:
Assist1/ Assist2/ Assist3/ Assist4/ Assist5 parameters can be set.
Speed limit: 1-100%
EABS level: 1-5
F start level: 1-5
R start level: 1-5
F current is limited
R current is limited
☆
☆
☆
☆Select Exit or POWER button to return to the main menu.
With the scooter power on, fast press the M button twice
(time interval must be within 0.3S), the system will
enter the parameter setting menu. Press M button
twice again to exit setting state (time interval must
be within 0.3S).
In the MENU setting interface, press M button to
confirm and press POWER to cancel. Press UP or
DOWN to select parametre you’d like to adjust. Press M
button, the parameter to be set will be blinking. If you
want to adjust parameters, please press UP or
DOWN. Then press M to save and press POWER or
select EXIT to go back to the main menu. In the function
selection interface, press M button twice consecutively
or select EXIT to exit menu.
MENU PARAMETER SETTING
8.1 Brightness: Press M button to enter the setting menu. Adjusting the brightness
1-5 by pressing UP/DOWN button.1 is the darkest, 5 is the brightest. Press M to
confirm and return to the main menu.
8.2 Unit system: Metric/Imperial
8.3 Auto off: Press UP/DOWN button to change the auto power off time. The
number from 1 to 10 represents time (minutes) to shut down and the default value is
10 minutes. Please press M to confirm or press POWER to cancel the settings.
8.4 Clock: Press M button to enter the clock setting menu. Press UP/DOWN button
to set Hour/Min. Press M to confirm or press POWER to cancel the settings.
After setting the parameters, press M to confirm and return to the main
menu.
8.5 Activate password and set: Press M button to enter password setting
interface. Select ON/OFF to turn on or off the start password. Select Reset the
Password to enter the new password setting interface. Select Back or press the
POWER button to return to the main menu. the default password is "0000".
8.6 Information: Press M button and choose
Information to enter information menu. It will shows
speed mode and mileage mode information. After
finish setting, press M button or POWER to choose
return to main menu.
8.7 Advance setting: Press M to enter into
Advance Setting interface and press UP/DOWN to
adjust the password and enter the advance setting.
Enter the correct password to enter the submenu. The
password is 4 digits and the default value is “2112”.
If the power-on password is turned on, the
advanced setting password is the power-on
password. The options and functions are as follows.
