Boly SG2060 Series User manual
User Manual
Trail Camera
SG2060 Series
Boly Trail Cameras
Table of Contents
1.Getting Started............................................................... 1
2.Camera Operation.......................................................... 3
2.1 Batteries/ Power Supply......................................3
2.2 SD Card Information...........................................3
2.3 Camera Mode...................................................... 4
2.4 Trigger Mode.......................................................5
3. Camera Setup Settings and Display...............................6
3.1 Settings Interface & Display............................... 6
3.2 Manual Image / Video Capturing........................7
3.3 Manage Images and/or Videos............................ 7
3.4 Camera Setup Operation..................................... 8
4.Technical Specifications...............................................15
5.Parts List....................................................................... 18
Boly Trail Cameras
1
1.Getting Started
①
②
③
④
⑤
⑥
⑧
⑦
①
IR LED
②
Flash/White LED: Available for
SG2060-T
③
Indication
④
Microphone
⑤
PIR
⑥
Lens
⑦
Lock
⑧
Speaker: SG2060Series
Boly Trail Cameras
2
4x1.7mm DC in
4x1.7mm DC in
Model
Product Features
SG2060-K
Ultra-High Quality 48MP, Extra long
detection range
SG2060-T
Combination White LED/Xenon Flash,
color pictures and videos at night，
Motion
Sharp Technology
Boly Trail Cameras
3
2.Camera Operation
2.1 Batteries/ Power Supply
The camera is powered by eight AA batteries. High-density,
high-performance, rechargeable alkaline or NiMH batteries are
recommended,all batteries must be 1.5V. When the batteries are
low, the camera will automatically shut down.
A DC 6V/2A external power supply adapter (not included) can
also be used to power the camera.
2.2 SD Card Information
Insert the SDcard into the camera before turning on the
camera.
This camera supports up to a 64GB capacity SD card and has no
built-in internal memory. The camera will not function without
the SD card properly inserted into the camera.
Make sure the SD card is unlocked before inserting it into
Boly Trail Cameras
4
the camera.
The camera will operate properly with a locked SD card
inserted, but the card will not be able to store captured images
or videos taken by the camera.
Do not remove the SD card while the camera is on.
Removing the SD card while the camera is on risks damaging
the internal components of the camera.
If you experience any problems with an inserted SD card,
try reformatting the SD card using the camera’s main settings
option.
2.3 Camera Mode
ON Mode
The camera will capture pictures or videos when motion is
detected and/or at specific time intervals, according to the
programmed settings. After switching the camera to the ON
position, the motion indicator LED(red) will blink for about 10
seconds and then turn off.This delay time allows you to adjust
the camera position if needed before the camera becomes active.
Boly Trail Cameras
5
SETUP Mode
Customize the camera settings, or playback pictures and videos
the camera has taken on the LCD display.
OFF Mode
Turns off the camera. The camera will still consume a small
amount of battery power while in the OFF mode. It is
recommended to remove the batteries if the camera will not be
used for a long period of time.
2.4 Trigger Mode
PIR Triggering: The default setting is on. If PIR Triggering is
on, the camera is only active when motion is detected. If PIR
sensitivity is set to OFF, the camera stops responding to the
motion.
Timer Triggering: The default setting is OFF, which means
timer triggering is disabled. When the timer triggering interval
is set to a non-zero value, the camera starts to work at a preset
interval. Users need to set the PIR sensitivity to OFF if they
want the camera to work only at preset intervals.
Boly Trail Cameras
6
PIR and Timer Triggering: For both PIR triggering and Timer
triggering, users need to set PIR sensitivity to low, normal, or
high according to the external environment, and set the Timer
interval to a desired non-zero value. The camera will capture
pictures or videos in a preset time interval even if there is no
motion detected. The camera will also capture pictures and
videos if motion is detected.
3. Camera Setup Settings and
Display
3.1 Settings Interface & Display
To update the camera settings, move the power switch to the
SETUP position.
Menu: Enter the program menu in preview mode
: Exchange between playback and preview mode
DEL: Delete a photo or video
: Capture a photo or record a video manually
▼▲►◄: Navigate parameter settings
OK: Save parameter settings and play videos
Boly Trail Cameras
7
When the camera is in SETUP mode, the screen will activate
and display the following:
3.2 Manual Image / Video Capturing
Place the camera in SETUP mode and press to manually
capture photos or record video. Press again to stop capturing.
3.3 Manage Images and/or Videos
Place the camera in the TEST/SETUP mode and press button
to view images or videos. The latest image or video will be
shown on the LCD screen.
To view:
Press ▲or ▼to view the previous or next image/video, press
to play a video.
Boly Trail Cameras
8
To delete:
Press DEL to delete images or videos in the playback state. If
you are in the preview state,press to enter into playback state
first.
3.4 Camera Setup Operation
To view the camera settings menu, slide the power switch to the
setup position.Use the ▼or▲buttons to select sub-menus; use
◄ or ► to select different options.Press OK to save the
settings.After changing EACH setting in the Setup menu,
press OK or the camera will not keep new settings.
Depending on the different models, not all menu options may be
available on your specific camera.
Menu
Options
Description
Camera Mode
There are three camera modes.
Photo: to take photos.
Video: to capture video.
Pic+Video: to take a picture with a video
Other manuals for SG2060 Series
2
Table of contents
Other Boly Digital Camera manuals
