89
P063GUI002 - Quick Start eCelsius Performance Connect.1 - EN P063GUI002 - Quick Start eCelsius Performance Connect.1 - EN
These instructions will allow you to boot your system.
To be aware of all the features, the use claims and contra-indications, please refer
to the user manual included on the USB memory stick.
Before the rst use of your system, you have to perform a set of operations.
1. ePerf Mobile APPLICATION SET-UP
You have to install the ePerf Mobile application on your Android smartphone or
tablet before using your system.
This is an essential tool for setting up the ePerf Connect device. The ePerf Mobile
application allows you to retrieve and display the data collected by the eCelsius
Performance Connect system. For this you must have an Android support with a
minimum conguration required:
- Android 8 or higher
- Bluetooth Low Energy 4.x or 5.x
- Access to the ‘‘Play Store’’
- 100MB available for installing the application
- 1024x768 for the screen resolution
2. MATERIAL
- ePerf Mobile application installed on Android smartphone or tablet
- ePerf Connect device and its charging cable
- eCelsius Performance capsule
- Activator and its dedicated USB cable
4. SET UP
Here is a summary of the steps before ingesting a capsule:
- Switch on the ePerf Connect device through a long press on button 1 located under
the BodyCAP logo.
- Charge it if the battery level is low.
- Install the ePerf Mobile application on your Android device through the Google Play
store and launch the application.
- Activate the Bluetooth function and the location of the Android device and pair the
ePerf Connect device with the ePerf Mobile application.
3. CHECK-LIST BEFORE INGESTION
ePerf Connect device:
- Sucient battery level.
- Date and time of the device.
- Association with the ePerf Mobile application.
- Prole created for each subject monitored through the application.
Capsule:
- Disposable.
- Activated and associated with the ePerf Connect device through the activator.
- Signaletic bracelet worn to the wrist.
