Body Solid FLP Installation instructions
OWNER’S MANUAL
A s s e m b l y I n s t r u c t i o n s
&
FLP
O W N E R ` S M A N U A L
A s s e m b l y I n s t r u c t i o n s
&
FLP
2
1
STEP
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
S T E P
1
A. Connect Mainframe (A) to Linkage Frame (L) and Plate (J) by using:
Four A1 (M10x130 hex dbolt)
Eight C1 (M10 washer)
Four B1 (M10 nylon lock nut)
B. Connect gym to Linkage Frame (L) and Plate (K) by using:
Two A9 (M10x80 hex head bolt)
Four C1 (M10 washer)
Two B1 (M10 nylon lock nut)
Be careful to assemble all components
in the sequence they are presented.
6
mm
Inch
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1" 2" 3" 4" 5" 6"
1
STEP
3
S T E P
Above shows STEP
assembled and completed
FLP-062008
A1X4
C1X4
J
L
B1X4
C1X4
B1X2
C1X2 KC1X2
A9X2
A
1
1
7
S T E P
Above shows STEP
assembled and completed
FLP-062008
A1X4
C1X4
J
L
B1X4
C1X4
B1X2
C1X2 KC1X2
A9X2
A
1
1
7
4
2
STEP
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
S T E P
2Be careful to assemble all components
in the sequence they are presented.
A. Connect Upright Frame (E) to Mainframe (A) using:
Four A13 (M12x40 hex head bolt)
Four C2 (M12 washer)
Four B2 (M12 nylon lock nut)
B. Slide Shaft (D11) through Leg Frame (D) and Mainframe (A) and tighten using:
Two A14 (M10x20 hex head bolt)
Two C1 (M10 washer)
8
mm
Inch
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1" 2" 3" 4" 5" 6"
2
STEP
5
S T E P
Above shows STEP
assembled and completed
FLP-062008
D
E
B2X4
C2X4
A13X4
2
2
9
A14X2
C1X2
A
D11
S T E P
Above shows STEP
assembled and completed
FLP-062008
D
E
B2X4
C2X4
A13X4
2
2
9
A14X2
C1X2
A
D11
6
3
STEP
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
S T E P
3
A. Install Connector Frame (E) to Leg Frame (D) and Upright Frame (E) by using:
Two D12 (M8 Shaft)
Four A15 (M8z20 allen head bolt)
Four C5 (M8 washer)
B. Insert End Caps (D4) to Foot Plate (G).
C. Connect Foot Plate (G) to Connector Frame (C) using:
Two A2 (M12x80 hex head bolt)
Four C2 (M12 washer)
Two B2 (M12 nylon lock nut)
Be careful to assemble all components
in the sequence they are presented.
10
mm
Inch
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1" 2" 3" 4" 5" 6"
3
3
STEP
7
S T E P
Above shows STEP
assembled and completed
FLP-062008
C
D4X2
G
C2X4
B2X2
A2X2
3
3
11
D12X2
C3X4
A15X4
D
E
S T E P
Above shows STEP
assembled and completed
FLP-062008
C
D4X2
G
C2X4
B2X2
A2X2
3
3
11
D12X2
C3X4
A15X4
D
E
8
4
STEP
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
A. Install Pulleys (D1-A) and (D1-B) into Mainframe (A) by using:
Two A10 (M10x60 hex head bolt)
Two D5 (steel bushing)
Two B1 (M10 nylon lock nut)
B. Install Pulleys (D1-C) and (D1-D) into Connector Frame (E) using:
Two A6 (M10x50 hex head bolt)
Four C1 (M10 washer)
Two B1 (M10 nylon lock nut)
C. Attach Handle Bar (B) to Mainframe (A) using:
Two A1 (M10x130 hex head bolt)
Four C1 (M10 washer)
Two B1 (M10 nylon lock nut)
D. Insert End Cap (D8) into Pulley Frame (H). Attach Pulley Frame (H) to Mainframe (A) using:
One A1 (M10x130 hex head bolt)
Two C1 (M10 washer)
One B1 (M10 nylon lock nut)
E. Connect Pulley (D1-E) to Pulley Frame (H) using:
One Q ("L" pulley cable plate)
One C1 (M10 washer)
One B1 (M10 nylon lock nut)
F. Attach Pulley Mount (O) to Linkage Frame (L) using:
One A5 (M10x75 hex head bolt)
Two C1 (M10 washer)
One B1 (M10 nylon lock nut)
G. Assemble Pulley (D1-F) to Pulley Mount (O) using:
One Q ("L" pulley cable plate)
One A4 (M10x45 hex head bolt)
Two C1 (M10 washer)
One B1 (M10 nylon lock nut)
S T E P
4Be careful to assemble all components
in the sequence they are presented.
12
mm
Inch
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1" 2" 3" 4" 5" 6"
4
STEP
9
A
S T E P
Above shows STEP
assembled and completed
FLP-062008
B1X2
C1X2
A6x2 C1x2
D1-C
A1
C1
HD1-E
B1
C1
A4
C1X2
QD1-F
A5
O
B1
C1
B1
C1X2
B1X2
A1X2
C1X4
A10X2
D5X4
D1-A
B1X2
Q
D8X2
B1
4
4
13
B
D1-B
L
A
D1-D
E
A
S T E P
Above shows STEP
assembled and completed
FLP-062008
B1X2
C1X2
A6x2 C1x2
D1-C
A1
C1
HD1-E
B1
C1
A4
C1X2
QD1-F
A5
O
B1
C1
B1
C1X2
B1X2
A1X2
C1X4
A10X2
D5X4
D1-A
B1X2
Q
D8X2
B1
4
4
13
B
D1-B
L
A
D1-D
E
10
5
STEP
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 6.
S T E P
5Be careful to assemble all components
in the sequence they are presented.
A. Connect Seat Pad (M) to Mainframe (A) by using:
One A11 (M8x80 hex head bolt)
One A7 (M8x100 hex head bolt)
Two C4 (M8 spring lock washer)
Two C3 (M8 washer)
B. Insert End Caps (D2) to ends of Back Pad support (F).
C. Connect Plastic Sleeve (D3) to Mainframe (A) as shown in the diagram. Insert End Cap
into the end of Back Pad Support (F).
D. Slide Back Pad Support (F) through Mainframe (A) as shown in the diagram.
E. Connect Back Pad (N) to Back Pad Support (F) by using:
Two A8 (M8x50 hex head bolt)
Two C4 (M8 spring lock washer)
Two C3 (M8 washer)
F. Slide Pad Wrap onto Back Pad (N).
14
mm
Inch
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1" 2" 3" 4" 5" 6"
Other manuals for FLP
2
Other Body Solid Home Gym manuals
Body Solid
Body Solid FCD User manual
Body Solid
Body Solid GDKR50 User manual
Body Solid
Body Solid Pro Club SFID425 Quick start guide
Body Solid
Body Solid DLEC.2 User manual
Body Solid
Body Solid Fusion 600 User manual
Body Solid
Body Solid DPLS.2 User manual
Body Solid
Body Solid EXM1950 User manual
Body Solid
Body Solid CCO-150.1 User manual
Body Solid
Body Solid GFID-31 User manual
Body Solid
Body Solid EXM-2000.5 User manual
Body Solid
Body Solid STH-1100.3 User manual
Body Solid
Body Solid SCC-1200G User manual
Body Solid
Body Solid G1S User manual
Body Solid
Body Solid G10B User manual
Body Solid
Body Solid DLAT.1 User manual
Body Solid
Body Solid G10B User manual
Body Solid
Body Solid LAT-ATTACHMENT WLA48 User manual
Body Solid
Body Solid LVLP User manual
Body Solid
Body Solid GINV50 User manual
Body Solid
Body Solid GHYP-345 User manual
