Body Life LASERSERIES User manual
Machine screen
Emergency Button
ND yag handle connector
ND yag laser handle
Screen
10.4inch color touch screen
Cover
High quality ABS material cover
Laser type
Q-switched ND:YAG laser
Laser wavelength
Standard： 1064nm 532nm; Optional: black baby
Frequency
1-10Hz
Cooling system Wind cooling+Water cooling+ Semicondutor
Light source 220V/110V 50Hz/60Hz
______________________________________________________________
_____________________________________________________________
Brand Body Life
_______________________________________________________________
Code TR1064
l1.Clean skin
l2.Connect the handle and footswitch .(See Machine Setup)
l3.Filling water.( see Machine Setup, attention , you must fill in water before
open the machine )
l4.Choose Treatment head:1064nm,532nm. 1064nm is for black and blue,
532nm is for brown and red. Then fix it in the laser gun.
l1). Open the machine, enter into “welcome” menu , then press the any place of this
menu , machine will enter into following working menu
2).Press yag,and enter into following menu:
1. :the Upper blank is for single count,the below blank is for double count,
button stands for reset count.
2. :this is for Frequency showing,press the upper row and below row to adjust
frequency,the frequency can be adjusted from 1-10HZ
3. :the energy rang from 1-2000MJ,adjust according to customer’s
physical condition,can adjust under treatment.
4. :this button shows water temperature,when it is up to the alarmed
temperature,machine will alarm.
5.the icon meaning according to front page to show.
After finishing the operation,you have to release foot switch first,secondly press
down key,back to status,then close the machine by key switch,
operation is finished.
Warning
!
This manual suits for next models
1
Table of contents
