Bodor BCL-X series User manual
User Manual for BCL-X Series Laser Machine
1
Laser Engraving and Cutting Machine
User Manual for BCL-X
Series
Jinan Bodor CNC Machine Co., Ltd
Adress: Huaya Industrial Park, Kanghong Road, High-Tech Zone, Jinan,
Shandong, China
ZIP: 250101
TEL: 0086-531-88690020
FAX: 0086-531-88690199
After-sales service：0086-531-88270377
Website:www.bodorcnc.com
User Manual for BCL-X Series Laser Machine
2
Brief Introduction of Laser Engraving Cutting Machine.................................................... 4
I Safety Knowledge..................................................................................................... 4
1.1 Basic Information.................................................................................................. 4
1.2 Optical Security............................................................................................. 4
1.3 Electricity Security........................................................................................ 4
II Equipment Brief Introduction............................................................................... 5
2.1 Instruction of Machine Model&Nameplate...................................................5
1. Model Instruction............................................................................................ 5
............................................................................................................................. 5
............................................................................................................................. 5
2. Nameplate Instruction......................................................................................6
2.2 Equipment Composition................................................................................ 6
2.3 Power Strip.................................................................................................. 15
III Equipment Installation..........................................................................................16
3.1 Installation Preparation................................................................................16
3.2 Installation procedure.................................................................................. 16
3.3 Grounding Connection................................................................................ 20
IV Test Equipment.....................................................................................................20
4.1 Inspect before powering on......................................................................... 20
4.2 Adjust light path...........................................................................................21
V Rotation axis processing........................................................................................ 28
VI Simple operation instruction................................................................................ 36
6.1 Software installation.................................................................................... 36
6.2 Data line using operation.............................................................................38
6.3 U disk operation...........................................................................................49
VII Equipment's maintenance....................................................................................52
7.1 Daily maintenance....................................................................................... 52
7.2 Water tank’s change and clean.....................................................................52
7.3 Exhaust fan’s clean...................................................................................... 52
7.4 Reflector’s and lens’ clean...........................................................................52
7.5 Guide rail's clean......................................................................................... 53
7.6 Light path's examination..............................................................................53
VIII CO2 glass laser tube's precautions for use.........................................................53
IX Common Breakdown Maintenance...................................................................... 54
Appendix 1................................................................................................................ 56
《After-sale warranty of Laser Engraving Cutting Machine》........................ 56
Appendix 2................................................................................................................ 59
Cutting and engraving parameters of laser tubes...............................................59
Postscript................................................................................................................... 62
《After-sale warranty of Laser Engraving Cutting Machines》.......................................62
User Manual for BCL-X Series Laser Machine
3
Preface
Thank you very much for your trust and purchasing our Products. We can provide perfect
after-sale service and solutions. Please keep this manual and other attachments carefully,
in order to guarantee the equipments safe running.
This manual is only applied to our company’s standard machines. With regard to special
customized machines, please read other reference material carefully.
This manual is written to demonstrate the issues about working principle, installation,
operation, failure removal, transport,storage, maintenance etc. Please read the manual
carefully, if you use the equipment the first time.
For quick and efficient using this equipment, the user should have qualifications as
below:
1. The user needs to know basic computer professional knowledge, and can operate
related editing and drawing software, such as Coreldraw, Photoshop, Autocad and so on.
2. The user should have basic optical knowledge and related electromechanical device's
maintenance knowledge.
3. Before starting the equipment, make sure this equipment's operation procedure is
known well and operate accordingly.
Because of equipments continuous updates, there may be some difference between your
equipments and equipments shown in the manual in some aspects. We apologize for the
convenience.
If you have any good suggestions or doubts, please log in our website
www.bodorcnc.com to leave a message or call us directly.
After-sales' Service：0086-531-88270377
User Manual for BCL-X Series Laser Machine
4
Brief Introduction of Laser Engraving Cutting
Machine
ISafety Knowledge
1.1 Basic Information
Make sure that the operator is being trained before operating the machine.
Operator must be aside the machine during machine working. Never leave the
machine alone in case to cause unnecessary loss.
1.2 Optical Security
Our laser equipment adopts the forth laser tube.Length of laser beam is 10.6μm. During
machine working, we recommend people related to wear authorized laser safety goggles.
Do not stare at the laser beam or anything beam reflected.
1.3 Electricity Security
Before connecting electricity, please check carefully the requirements on the
equipment's name plate, such as power,working voltage and so on.
Without our permission, please don't dismantle electrical apparatus elements on the
equipment, especially do not touch laser power and laer tube during machine
working. Because the equipment has fatal voltage when working, and danger can
still exist after disconnecting electricity.
1 Harm
Various potentially dangerous substance can be eliminated through ventilation system
during plastic material cutting. If smog or smell is too heavy, gas mask is needed.
2 Other Harm
Out of security consideration, equipment modification is forbidden without the
permission from the Manufacturer.
User Manual for BCL-X Series Laser Machine
5
II Equipment Brief Introduction
2.1 Instruction of Machine Model&Nameplate
1.Model Instruction
※※※一※※※※一※※
BCL1309X means standard serial laser cutting machines with 1300mm x 900mm
working area and up-down working table.
Machine Serial
BCL:
Bodor Cutting
Laser
BML：
Bodor Marking
Laser
Machine Working Area：
0503: 500mm×300mm
0605：600mm ×500mm
1006：1000mm×600mm
1309: 1300mm×900mm
1610: 1600mm×1000mm
… ……
Model Introduction：
M: Mini Machine Serial
X: Standard Machine Serial
B: Bed Machine Serial
FB: Fiber Laser Cutting
Machine Serial
YB/YT: High Power Metal
Cutting Machine Serial
FP/BM: Fiber Laser Marking
Machine Serial
Other Attachments:
U- with up-down working
table
F- automatic focus/fiber
generator
H- high speed guid rail
V- vac-sorb
A- auto feed
CCD- automatic logo
positioning cutting machine
P- separable style stone
engraving machine
S- screw machine
R-RF tube
G-glass engraving machine
D-die board cutting machine
User Manual for BCL-X Series Laser Machine
6
2.Nameplate Instruction
This serial equipment is vertically installed in the middle of the transmission shaft, which
can make speedy and stable cutting and engraving.The nameplate of machine is in the
right-back side. You can read the relevant information on it. It is not accepted for
anybody to change or remove this nameplate.
2.2 Equipment Composition
Declaration: Due to different models or new updates in products, there may be some
difference in appearance or some partial detail. Specific equipment is subject to
final product.
2.2.1 Composition of full set machine
A.Machine Shell B.Drive System C.Optical System D.Control System E.Spare Parts F. Tool
Box
Laser
Machine
Machine
Shell
Drive
System
Optical
System
Control
System
Spare
Parts
Tool
Box
This number is only for each machine
User Manual for BCL-X Series Laser Machine
7
2.2.2 Machine Shell
Right/Left Shield; Side Door; Up Cover; Transom(X Axis); Carling (Y Axis);
Working Table.
Working
Side
Front Door
Transom
Carling
User Manual for BCL-X Series Laser Machine
8
2.2.3 Drive System:
Y Axis:
Back
Smoke
Entrance
Name
Universal
Wheel
Foot
USB Flash Interface
Computer Interface
User Manual for BCL-X Series Laser Machine
9
X Axis:
Guide Rail
Girdle
48 tooth
Synchronizin
g Wheel
Motor
Transmissio
n
24 tooth
Synchronizing Wheel
belt
Guide Rail
Belt
Mot
or
Pinion Stand
Endless-belt
Couple
r
24 tooth
Synchronizing
Wheel
48 tooth Synchronizing
Wheel
User Manual for BCL-X Series Laser Machine
10
2.2.4 Optical System
Attention:
The laser tube is fragile. It should be taken slightly. Water inlet of the laser tube should be
in the lower place, and water outlet be in the higher place(reci laser tube), so there won't
be any bubble. The laser tube socket should be installed with even force which can just
make the tube secure. Do not overexert, it may crush the laser tube.
Attention:
The front surface of reflection mirror should be faced to the laser outlet.
Laser Tube
Reflection Mirror
Laser outlet
Cathode rays
Reflection Mirror frame
Laser Tube Socket
Table of contents
Other Bodor Cutter manuals
Popular Cutter manuals by other brands
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Original instructions
Makita
Makita DCS552 instruction manual
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 user manual
Makita
Makita 4112HS instruction manual
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S manual
Hitachi
Hitachi CM 4SB2 Safety instructions and instruction manual
