Boca BASIC VGA VGA006 User manual

Installation Guide

PRODUCT CODE:

VGA006

BASIC VGA

by BOCA

BASIC VGA by BOCA

Before You Begin your Installation

The product you have purchased is

designed to be easily installed into

most IBM PC or compatible

systems. Many products have large,

easy-to-read legends to allow for

the easy configuring of the product.

This installation manual contains

detailed instructions. Most included software has automatic

installation programs to place the software correctly onto

your computer. However, as all computers are configured

differently, you may be required to perform some basic DOS

or Windows tasks. If you are not familiar with basic DOS

commands such as DIR, CD, or EDIT, you should check your

DOS manual, or seek as

sistance from you local computer

dealer to install the product.

How to get Technical Assistance

The dealer that you purchased this product or your

computer from is the FIRST place you should go for

technical assistance. The dealer is usually the most qualified

source of help, and is most

familiar with your system and

how this product should be

installed. Many dealers have

customer service and technical

support programs, with

varying levels of support offered, depending on your needs

and computer knowledge. Please contact the dealer first

whenever a problem occurs.

BASIC VGA by BOCA

The Standard Free Technical Support number is for quick answers to specific

inquiries on product features and technical questions (call 407-241-8088; M-F,

8 am to 6:30 pm EST). Direct access to technical support representatives is

provided on a limited basis. If you require immediate attention or in-depth

help with the installation of the product, please call our 900-priority support

number for service. This number gives you immediate access to senior-level

technicians. The number is 900-555-4900. You will be charged $2.00 per

minute. The charges will appear on your next phone bill.

Damaged or Missing Items

We use many world-class quality assurance programs to ensure the product

you purchased is of the highest caliber. Sometimes, however, a component

may be missing from the box, or is damaged or corrupt in some way. If this

happens, immediately return the entire package to your place of purchase so

you may exchange it for a new one. Your dealer should be able to provide you

with an exchange far more quickly than by contacting us directly. If for some

reason you are unable to return the product directly to its place of purchase,

refer to the “Servicing Your Product” and “Warranty” sections in this manual

for instructions.

On-Line Support!

CompuServe: GO BOCA

Internet:

email: [email protected]

on the World Wide Web:

http://www.boca.org

Standard Free

Technical Support

407-241-8088

Priority Service

900-555-4900

($2 per minute)

Technical Support

Fax

407-997-0918

AutomatedFax

Retrieval System

407-995-9456

Boca BBS

407-241-1601

Contents

Section One: Introduction..................................................6

Section Two: Getting Started ............................................7

2.1 Installation Requirements.............................................. 7

2.2 Monitor Compatibility .................................................... 7

2.3 System Compatibility ..................................................... 8

Section Three: Physical Installation.................................9

3.1 Removing the System Cover ......................................... 9

3.2 If Installing in a PC or XT ............................................. 10

3.3 Inserting the Basic VGA............................................... 11

3.4 Replacing the PC Cover ............................................... 12

3.5 Configuring the Basic VGA on a Network.................. 13

Appendix A: Troubleshooting ........................................ 14

Appendix B: Pin Assignments ....................................... 15

Appendix C: BIOS Modes Chart ..................................... 16

Appendix D: Servicing Your Boca Product................... 18

Appendix E: Drivers and Utilities................................... 20

Introduction

BASIC VGA by BOCA

Section One: Introduction

Congratulations on the purchase of your Basic VGA by BOCA, Video

Graphics Array board. The Basic VGA is 100% IBM VGA compatible

and is designed to work in all standard PC, XT, AT, and compatible

computers. This manual explains how to set up, install, and use the

Basic VGA board.

Basic VGA features include:

• Register level compatibility with the IBM VGA Adapter

• One step installation; no switches or jumpers to set on the board

• BIOS level compatibility with EGA/CGA/MDA graphics standards

• 16-bit connector for use in either 8-bit or 16-bit bus

• Software drivers and utilities for use with popular applications.

Instructions for their use appear in Appendix E.

Section Two: Getting Started

Please examine the Basic VGA board to see if there is any damage

which may have occurred during shipment. If the board appears

damaged, please contact the retailer from whom the Basic VGA was

purchased.

2.1 Installation Requirements

This manual is designed to answer questions you might have concerning

the installation and use of the Basic VGA, as well as provide

descriptions of legitimate system configurations. Please take a few

moments to read through this manual before installing your Basic VGA.

2.2 Monitor Compatibility

VGA Color/Monochrome

The Basic VGA board is compatible with these monitors.

Multiple Frequency Monitors

The Basic VGA board is compatible with these monitors, provided the

proper 15-pin cable adapter is used with the monitor, and the monitor is

set to analog.

IMPORTANT: The Basic VGA uses the same 15-pin (DB15) cable

available from monitor manufacturers to interface with the IBM

PS/2 computers. Using an incorrect cable may result in damage to

the monitor and/or adapter.

Getting Started

BASIC VGA by BOCA

2.3 System Compatibility

IBM Personal Computers

IBM Personal Computers manufactured prior to April 1983 must have a

new ROM module installed on the system board before you install and

use the Basic VGA board. The ROM is contained in the BIOS Upgrade

kit available from your IBM dealer.

IBM Personal Computer, PC-XT, PC-XT 286, and AT

The Basic VGA board is compatible for use in these systems.

Compatible Personal Computers

Check with the dealer or manufacturer of your computer. The Basic

VGA board is compatible with the IBM Video Graphics Array and

Enhanced Graphics Adapter. Most compatible systems support the IBM

VGA or EGA standard. If your computer supports the IBM Enhanced

Graphics Adapter, then the Basic VGA board will work in your system.

Section Three: Physical Installation

Installation of the Basic VGA is simple and quick for the expert and

novice alike. The following instructions assume an AT-style or

compatible machine. Obviously, locations and types of screws as well

as type of case cover will vary based on your particular system. Refer

to your computer system documentation for additional assistance.

3.1 Removing the System Cover

1. Turn the power switch to the OFF position.

2. Remove the power cord from the back of the computer.

3. Unplug the keyboard cable found in the lower middle of the

computer’s rear panel.

4. Use a small screwdriver to remove the screws that attach the

computer’s cover to the rear panel.

5. Carefully slide the cover forward—away from the rear panel. Be

careful not to let the cover catch on internal cables to the disk drive

and power supply.

Physical Installation

BASIC VGA by BOCA

Adapter card connector slots normally reside in the rear of the system

board adjacent to the power supply. There are usually anywhere from

five to eight edge connectors, depending on the model of your system.

3.2 If Installing in a PC or XT

The PC and XT allow you to change your system configuration to

support different types of monitors. The PC and XT have banks of

switches located on the motherboard which allow you to configure them

for monochrome, color, or no display. These switches can be set when

you open the PC or XT to put the Basic VGA board inside.

NOTE: Some compatible computers may have different switch settings.

Please check the user’s manual for your system.

To use the Basic VGA with a PC or XT, the system needs to be

configured for “no display”. This is done by setting switches 5 and 6 on

Switch Block 1 to ON. Use the following steps to set the switches:

1. Locate Switch Block 1. The XT has only one switch block on the

motherboard.

2. There are 8 individual switches on the switch block, labelled 1 to 8,

ON or OFF. Set switches 5 and 6 to ON. This sets the PC or XT for

“no display”. Do not change any other switches.

Table of contents

Boca BASIC VGA VGA006 User manual

Popular Video Card manuals by other brands