Bluetti AC180P User manual
AC180P
Portable Power Station
User Manual
Please read this manual carefully before use and keep it for future reference.
Warning
1. Charge the unit before first use.
2. Do not use solar panels with open circuit voltage higher than 60V. Solar input voltage range
for the unit is DC 12V~60V.
3. Charge the unit when the SoC drops below 5%. If the SoC drops to 0, power off the unit and
charge it for at least 30mins before restarting.
4. The unit is for off-grid use only. Do not connect its AC output to the grid.
5. If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the
power off. For optimum battery life, discharge and charge the unit every 3 months.
6. This product must be grounded before operation.
Connect a grounding cable (recommended 14AWG（1.5mm2）/105oC/yellow-green color) to the
grounding terminal of AC180P. Fasten the grounding screw (M5*10) to fix the cable.
Thank You!
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future
through green energy storage solutions for both indoor and outdoor use while
delivering an exceptional eco-friendly experience for our homes and our world.
That's why BLUETTI makes its presence in 70+ countries and is trusted by
millions of customers across the globe.
Franch
Germany
Netherlands
Safety Instructions
General Safety
Handling
Storage and Usage
What’s In The Box
Product Overview
Diagram
Specifications
Operating Instructions
Buttons
LCD Screen
Charging
Discharging
BLUETTI App
Appendix
FAQs
Troubleshooting
Abbreviations
FCC Warning
Important Instructions
Contents
1
1.1
1.2
1.3
2
3
3.1
3.2
4
4.1
4.2
4.3
4.4
4.5
5
5.1
5.2
5.3
5.4
5.5
05
05
07
07
08
10
10
11
12
12
14
15
17
18
19
19
20
21
21
23
1. Safety Instructions
Read this manual for instructions on the proper use and safety information for the unit.
Follow the warnings and instructions marked on the unit and its accessories.
Pay attentionto the "Instruction", "Caution", "Warning" and "Danger" symbols in this
manual, and follow theinstructions carefully to avoid injury or damage.
The Safety Requirements provided herein are for illustrative purposes that include but
are not limited to those listed in this manual. Actual operation shall comply with all
applicable safety standards.
If you have any questions, feel free to contact BLUETTI support or your local BLUETTI dealers.
1.1. General Safety
• Always operate or store the unit in the conditions specified in this manual.
• The installation and ambient conditions must comply with the regulations in the
relevant international, national or regional standards.
• Unauthorized disassembly, alteration of the equipment or modification of the software
code is not allowed.
BLUETTI shall not be liable for the following circumstances:
• Equipment damage caused by force majeure, such as earthquake, fire, storm, flood,
mudslide, etc.
• Damage or loss during transportation.
• Damage caused by storage conditions that do not meet the requirements specified in
this manual.
• Damage to the hardware or data of the equipment due to customer negligence,
improper operation or intentional damage.
• Damage to the system caused by a third party or the customer, including handling
and installation that does not meet the requirements specified in this manual.
• This product is not suitable for providing electrical service for equipment and machines
that are highly dependent on the reliability of electrical power supply and that involve
personal safety, such as atomic energy, aviation, medical, etc. Poweroak will not be held
responsible for any personal safety accidents, fire accidents, equipment failures, etc.
caused by using this product to supply power to the above equipment and machines.
• Damage caused by adjustment, alteration or removal of identification marks.
To avoid danger, please regulate the operation in the following manner：
• Do not install, use and maintain the unit in adverse weather conditions such as
lightning, rain, snow and strong breezes (including but not limited to handling and
operating the unit, plugging and unplugging signal connections to outdoor facilities,
working at height, outdoor installations, etc.).
JUST POWER ON 05
• The transportation, wiring and maintenance shall comply with all applicable laws,
regulations and standards.
• User-provided materials and tools required shall meet the requirements specified in
applicable laws, regulations and relevant standards.
• Always turn off the power sourcebeforestartingany electrical work.
• Do not clean the unit with water.
• Do not disassemble,modify, tamper with or repairthe unit on your own.
• Regularly inspect the unit and its accessories for damage or deterioration.
• Use a tester to check for the presence of dangerous voltage before touching any
conductor or terminal.
• If the unit’s shell is cracked during transportation or use, do not use it and contact
BLUETTI support or your local BLUETTI dealers.
• Use a dry powder extinguisher if the unit catches fire.
• In case of fire, EVACUATE the building or affected area immediately, activate the closest
FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.
• Use genuine cables and accessories provided by BLUETTI.
• Keep the unit away from heat sources or high temperatures, and do not expose it to
direct sunlight.
• Do not store the unit with flammable liquids, gases, or explosive materials.
• Make sure the area where you are using the unit is well ventilated and spacious.
• Do not block or cover the vents of the unit as this may cause irreversible damage to it.
• Use the unit for its intended purpose and avoid stacking objects on top of it during
storage or use.
• Do not move the unit during operation as the vibrations and shocks associated with
movement may cause damage to the internal hardware.
• In case of malfunction, turn off the unit immediately and contact BLUETTI support or
your local BLUETTI dealers if this manual cannot adequately explain the malfunction to
you.
• Do not place the unit on an unstable or inclined surface.
• Do not insert foreign objects into any port and vent of the unit.
• Keep away from children and pets.
• This product must be grounded before operation.
Connect a grounding cable (recommended 14AWG（1.5mm2）/105oC/yellow-green
color) to the grounding terminal of AC180P. Fasten the grounding screw (M5*10) to fix
the cable.
Legal and Regulatory Requirements
JUST POWER ON06
1.2.Handling
Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).
1.3. Storage and usage
• When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in
optimal condition.
• Before storing the unit, power it off and remove all electrical connections from it.
• Store the unit in a cool and dry place. The ideal temperature range is 1o0C to 300C. The
unit can be safely charged and discharged at temperatures of -200C to 400C. However,
it’s NOT recommended to store the unit in harsh temperatures for extended periods of
time.
• Fully cycle the unit every 6 months to maintain the battery’s health.
If the SoC drops to 0 (during operation or upon startup), take the following
actions to safely restart the unit:
1)Shut down immediately.
2)Charging within 48 hours.
3)Battery should be kept at an ambient temperature of 50C to 350C for 24 hours before
charging.
It is recommended to charge the unit via an AC source. If charging via solar energy,
ensure that your solar system provides an output of more than 100W.
BLUETTI shall not be liable for any equipment damage caused by the violation of above
instructions.
Recommended number of people based on the weight of product
Weight
<18kg
18kg~32kg
32kg~55kg
>55kg
Number of people
1
2
3
4 or a cart
JUST POWER ON 07
2. What’s In The Box
Item Picture Qty.
Portable Power
Station 1
AC Charging Cable
(16AWG, 1800mm) 1
Car Charging Cable
(16AWG, 720mm) 1
Solar Charging Cable
(16AWG, 1500mm) 1
Standard Packaging
User Manual 1
1
Grounding screw
(M5*10)
JUST POWER ON08
Cigarette Lighter to Clamp Cable
(Charging lead-acid battery via
the cigarette lighter port)
Cigarette Lighter to 5521 Cable
(For 12V devices with 5521 port,
such as routers, cameras, etc.)
Lead-acid battery charging cable
(DC7909)
Item Picture
TYPE-C Cable
(5A/100W, 2m)
Optional
(Available on official BLUETTI website)
JUST POWER ON 09
3. Product Overview
BLUETTI AC180P is a portable power station with 1800W pure sine wave inverter and
1152Wh LiFePO4 battery, perfect for camping, van life and more. In addition to 4 AC
output ports and 5 USB ports (4 USB-A and 1 USB-C), it also has a 12V/10A cigarette
lighter port for your vehicle devices and a wireless charging pad to run compatible
electronics, your phone, headphone, Bluetooth speaker, just to name a few. As for
recharging, AC180P takes up to 1440W AC input and 500W DC input, so you’re able to
fully charge it in a few hours. It also supports BLUETTI app control - with the Bluetooth
connectivity, you can monitor everything that's happening inside and optimize your
power usage to your preference.
DC Input
DC Power Button
LCD Screen
Power Button
AC Power Button
Wireless Charging Pad
AC Output
Grounding Pole(Grounding screw: M5*10)
AC Input Fuse
AC Input
Cigarette Lighter Port
USB-C Port
USB-A Port
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
3.1 Diagram
1
11
3 764 52
8
9
10
12
13
JUST POWER ON10
Other manuals for AC180P
1
Table of contents
Other Bluetti Power Pack manuals
