Bluesonic BS-F110 User manual

16

Car Camcorder BS-F110

User Manual

2

15

14

Notes

_______________________________________________________________

3

Contents

About this Guide

WEEE Noce

Notes on Installaon

Cauon

1. Introducon

1.1 Features

1.2 Package Contents

1.3 Product Overview

2. Geng Started

2.1 Inserng the Memory Card

2.2 Connecng to Power

2.3 Installing in Vehicles

2.4 Powering the Device On/O

3. Using the Car Recorder

3.1 Recording Videos and Taking Snapshots

3.2 Playing Videos and Photos

4. Adjusng the Sengs

4.1 Using the Menu

4.2 Menu Tree

5. Specicaons

4

About this Guide

The contents of this document are for informaon purpose and are subject

to change without prior noce. We made every eort to ensure that this

User Guide is accurate and complete. However, no liability is assumed for any

errors and omissions that may have occurred. The manufacturer reserves the

right to change the technical specicaons without prior noce.

WEEE Noce

Disposal of Waste Electrical and Electronic Equipment and/or Baery by

users in private households in the European Union

This symbol on the product or on the packaging indicates that

the product can not be disposed of as a household waste. You

must dispose of your waste equipment and/or baery by han-

dling it over to the applicable take-back scheme for the recy-

cling of electrical and electronic equipment and/or baery. For

more informaon about recycling of this equipment and/or

baery, please contact your city oce, the shop where you

purchased the equipment or your household waste disposal

service. The recycling of materials will help to conserve natural

resources and ensure that it is recycled in a manner that pro-

tects human health and environment.

Notes on Installaon

1. Install the front-view camera near the rear-view mirror to obtain the

best open-eld view.

2. Make sure that the lens is within the wiping range of the windscreen

wiper to ensure a clear view even when it rains.

3. Install the rear-view camera either on the dashboard to observe the

interior, or on the rear window to observe the road.

4. Do not touch the lens with your ngers. Finger grease may be le on the

lens and will result in unclear videos or snapshots. Clean the lens on a

regular basis.

5. Do not install the device on a ned window. Doing so may damage the

nt lm.

13

Notes

_______________________________________________________________

12

5. Specicaons

All other marks, products or company names menoned in this guide are

trademarks of their respecve companies.

5

6. Make sure that the installaon posion is not hindered by the nted

window.

Cauon

 Use the branded charger only

 Never disassemble by yourself

 Never short-circuit the baery

 Dispose of the baery properly

 Exposing the baery to open ames can cause explosion

1. Introducon

Thank you for purchasing this advanced Car Recorder. This device is speci-

cally designed for real-me video and audio recording when driving

1.1 Features

 Dual-channel Super HD recording (2304x1296 @ 30fps)

 Wide angle lens 120 degrees

 2.0” LCD color screen

 Support MicroSD card up to 32Gb

 HDR and WDR funcons

 External GPS

1.2 Package Contents

The package contains the following items:

Car Recorder - 2 pcs

Controller

Hub

Bracket - 2 pcs

Car Adapter

USB Cable

Mini HDMI Cable

GPS Logger

AV-out Cable - 3 pcs

Scker - 2 pcs

User Manual

6

1.3 Product Overview

Car Recorder

Note: To operate the device, press the corresponding buons (6~7) accord-

ing to guide icons shown on the screen.

Controller

11

4.2 Menu Tree

Refer to the below table for details on menu items and available menu op-

ons.

10

Recording all other types of videos

1. Short press the Record Buon on the Camera. Or choose the channel

wanted on the Controller and short press the Ok Buon to start recording.

2. Press the OK Buon again on the Controller, or the Record Buon on the

Camera to stop recording.

Note: The video le is saved for every 1, 3 or 5 minutes of recording. The

device saves the recording in the memory card. If the memory card is full, the

oldest le in the memory card is overwrien. To turn o the Microphone

when the recording is in process, short press the Down Buon on the Con-

troller.

Taking Snapshots

You can also use this device to take snapshots of the current scene. Press

Camera Buon to enter the to take a snapshot.

3.2 Playing Videos and Photos

1. Press the Mode Buon on the Controller to enter the Playback Mode.

2. Press the Up/Down buon to select the video les and photo les.

3. Press OK buon to play or pause the video.

4. Press the Mode Buon to exit Playback Mode.

4. Adjusng the Sengs

Using the Menu

You can customize the video recording and other general sengs via the on-

screen display (OSD) menu.

Please mind, you have to set the Menu Sengs for each camera separately.

1. Press the Menu Buon on the Controller to enter the menu interface.

2. Press the Up/Down Buon to select a menu opon and press the OK

Buon to enter the selected menu.

3. Press the Up/Down Buon to select the desired seng and press the OK

Buon to conrm the seng.

4. Press the Mode Buon to exit the Menu.

7

Hub

GPS Logger

8

2. Geng Started

2.1 Inserng the Memory Card

Insert the memory card and push it unl it clicks into place.

To remove the memory card

Push to eject the memory card out of the slot.

Note: Do not remove or insert the memory card when the device is turned

on. This may damage the memory card.

2.2 Connecng to Power

Use only the supplied Car Adapter to power up the device and charge the

built-in-baery.

1. Connect the cameras to the corresponding slots on the hub.

2. Connect one end of the Car Adapter to the USB Connector of the device.

3. Plug the other end of the Car Charger to the cigaree lighter socket of

your vehicle.

2.3 Installing in Vehicles

Mounng to Windshield

1. Aach the device to the bracket base with scker. Make sure the device is

securely locked in place.

9

2. Posion the scker on the windshield with the scky surface and press for

a moment. Make sure the base is securely aached to the place.

3. Aach the second camera on the rear window, using the scker.

4. Hold the camera rmly on the windshield and press for a moment unl the

scker scks to the glass. Make sure the base is securely aached to the

place.

2.4 Powering the Device On/O

Auto Power On/O

Once the vehicle engine is started, the device automacally turns on if the

switch is in ON posion on the Controller. If the Automac Record Funcon is

enabled, the recording will automacally start right aer the device turns on.

Once the vehicle engine shuts down, the device automacally saves the

recording and turns o the power.

Manual Power On/O

To manually turn on the power, chose the camera with the help of Channel

Switch and long press the POWER Buon.

To turn o, press and hold the POWER Buon for at least 2 seconds.

3. Using the Car Recorder

3.1 Recording Videos

Recording videos while driving

When the vehicle engine starts up the device automacally turns on and

starts recording. Recording will automacally stop when the engine is

switched o. Or, press the OK Buon to stop recording manually.

Note: On some cars, the recording will connue when the engine is switch

o. If this happens, do one of the following:

1. Manually turn o the cigaree lighter.

2. Remove the car adapter from the cigaree lighter.

Bluesonic BS-F110 User manual

Popular Dashcam manuals by other brands