bluemango BMH-G365 User manual
INSTRUCTION MANUAL
GLOBAL SHUTTER
FULL HD MEGA PIXEL ZOOM CAMERA
Before installing and using the camera, please read this instructions thoroughly and
keep for reference.
1
2
TABLE OF CONTENTS
Precautions ---------------------------------------------
Features -------------------------------------------------
Package Components ------------------------------
Dimensions ---------------------------------------------
Part Names And Functions ------------------------
Connections --------------------------------------------
External Device Connections ----------------------
Video Out ------------------------------------------------
Menu Operation ---------------------------------------
Main Menu ----------------------------------------------
Trigger Mode -------------------------------------------
Zoom/Focus --------------------------------------------
Exposure ------------------------------------------------
White Balance -----------------------------------------
Image ----------------------------------------------------
Intelligent ------------------------------------------------
Special Function --------------------------------------
Display ---------------------------------------------------
Specifications ------------------------------------------
3
5
6
7
8
9
10
12
13
14
15
20
21
25
26
28
30
32
33
3
PRECAUTIONS
■Avoid prolonged use in high temperature and high humidity environment
Use the product within the operating range specified in the specifications.
Avoid locations where heat is generated, and Install in a well-ventilated place.
■Do not install the camera in an unstable place
Confirm that the camera is firmly fixed after installation.
Dropping the product due to poor installation may cause injury.
■Install the camera away from dusty places
This may cause product malfunction, poor image quality, fire or electric shock.
■Do not install the camera under unstable lighting conditions
It is possible to output an inappropriate image due to severe illumination change or lighting
flickering.
■Do not install the camera near gas or oil leaks
Use in a place with flammable materials may cause fire.
Also, keep distance from power line cables or use separate metal piping.
■Do not disassemble the camera or insert foreign objects
There is no warranty liability for products that user disassembled.
4
PRECAUTIONS
■Do not drop the camera or shock it
It may cause malfunction.
■Never keep the camera directly face to strong light.
Exposure to strong light such as sunlight may cause light spreading or light blurring. In addition,
direct sunlight can damage the image sensor.
■Prepare for malfunction due to natural disasters
The grounding work or the installation of the surge protector can minimize damage to the
product due to lightning, etc.
■Be sure to check the specifications of the power supply
Before connecting the power to the product, make sure that the power supply meets the
recommended specifications.
5
FEATURES
•1/2.3" Sony Global shutter CMOS sensor
•36x Optical Zoom
•Full HD Resolution
1920x1080p 60/50/30/25fps, 1280x720p 60/50/30/25fps
•Day & Night(ICR)
•DWDR(Digital Wide Dynamic Range)
•DNR(Digital Noise Reduction, 2D+3D)
•DIS(Digital Image Stabilization)
•EX-SDI(Long Reach)
•Privacy Mask Function
•On Screen Display
•Intelligent Motion Detection
•Multi-Protocol(VISCA, Pelco-D, Pelco-P)
•Supports External trigger input and Strobe output
6
PACKAGE COMPONENTS
CAMERA
CABLE MANUAL
Optional Remote Controller
Not used
Tele/Up
Far/Right
Menu/Set
Wide/Down
Near/Left
7
DIMENSIONS
Unit : mm
8
PART NAMES AND FUNCTIONS
1. OSD / Zoom / Focus control
2. DIGITAL OUT
3. HD-SDI
4. EX-SDI
5. ANALOG OUT
6. CVBS
7. HD-SDI
8. AD KEY
1) GND
2) AD-KEY
3) GND
9. Power LED
10. Control Terminal
1) OPTO –I : Trigger Input
2) OPTO –IG : Isolated Ground(Trigger)
3) OPTO –O : Strobe Output
4) OPTP –OG : Isolated Ground(Strobe)
5) RS-485 (+)
6) RS-485 (-)
7) Motion Detection Out
8) No Connection
9) Ground
10) Day&Night Input (Low : Night, High : Day)
11. Power : DC12V
5
10 11
1
3, 4
9
2
6, 7
8
9
CONNECTIONS
Basic connection
The peripheral devices (DVR, monitor, lens, etc), DC adaptor
and cables are not supplied.
1. Connecting the monitor.
Make the video signal connection between the camera and
the monitor or time lapse monitor or DVR.
2. Use a commercially available DC12V adaptor.
Connect an DC 12V power source to the DC 12V input
terminal on the back of the camera.
3. Insert the plug of this power cord into a wall outlet.
The POWER indicator will light. Adjust the picture on
the monitor using the Brightness and Contrast controls etc.
To monitor’s Video Input or Camera Input
10
EXTERNAL DEVICE CONNECTIONS
RS-485 COMMUNICATION
Connect to an external controller of RS-485 format.
Motion Detection Out
When the motion detection function is working.
DC3.3V is outputed to OUT pin and GND pin.
Day & Night input
Day/Night mode of the camera can be switched by
signal from an external device.
To use this function, <DAY&NIGHT> setting of the
camera should be set to the <EXT>.
Note : Use a relay unit if the voltage or current of the
connected device exceeds the ratings.
Table of contents
Other bluemango Digital Camera manuals
