BlueBuilt CBL1163 User manual
In the box
1
TV frames,
2
bag of screws, washers, spacers for the TV, and spirit level,
3
a mold,
4
bag of screws and plugs for the wall,
5
wall mount,
6
cover caps,
7
securing bar,
8
velcro for your cables.
WALL MOUNT.
Brace yourself.
Your own tools
9
Open-end or socket wrench 11mm,
10
cross-head screwdriver,
11
pipe locator,
12
5mm drill,
13
10mm drill,
14
pencil,
15
hammer,
16
tape measure,
17
impact or concrete dril
18
a lovely blanket to place everything on.
30 minutes 2 people 4 coffees
1 2
913
14
10 11 12
3
5
4
7 8
6
15
16
17
18
1.PLACE THE FRAMES 2.INSTALL THE FRAMES 3.MARK DOWN THE WALL
Drill with precision by first using the 5mm
drill, and then the 10mm drill. Drill as deep
as the screws
4
are in length.
Hammer de plugs
4
into the drill holes.
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
Secure 1 screw. Extra space? Place washer
(G) or spacer (H or I) in between.
Now secure the other 3 screws in the same
way.
Screw the wall mount
5
to the wall with
the washers
4
in between.
Place the cover caps
6
on the wall mount.
Lift the TV with 2 people and attach it to the
wall mount.
Place the securing bar
7
in the opening on
the bottom of the frames.
Done! Pat yourself on the back, turn on
the TV, and bask in the glory of your
accomplishment.
Draw an X on the wall where the middle of
the TV should align.
Place the mold
3
on the wall so you can
see the X you’ve just drawn using the
marker and draw the drill holes using
the spirit level (J).
Need help?
Call 010 798 89 99 or visit
Coolblue.nl/en/customer-service
Prior to drilling
Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.
Place your TV on a blanket and place the
TV frames
1
on your TV as pictured.
Look in bags A through F
2
for the screw
that fits your TV. You only need 1 set of
screws.
Suitable surface area:
Solid brick
Solid concrete
CBL1163
4.DRILL 5.INSTALL THE WALL MOUNT 6.SECURE THE WALL MOUNT
Tilting the TV
Use the dials on the sides
of the wall mount to tilt the
TV when it’s hanging on the
wall.
CHECKLIST.
You’re 50% there.
Other BlueBuilt Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
