Patient chairs and patient stool ZAC – CT - SIT
1 De ice Specifications
De ice Type: Refraction and patient chair ZAC,
Refraction and patient chair CT,
Refraction and patient stool SIT.
Manufacturer: Block Optic Ltd.
Semerteichstr. 60
44 4 Dortmund
Germany
Intended
Applications :The ZAC or CT chair and the SIT stool are used as refraction
and patient chairs and stool and can be operated as a single
chair/ stool with a foot switch or directly with a Block
refraction unit. The ZAC or CT chair and the SIT stool are
used in areas of ophthalmologic optics and ophthalmology.
Unintended
Applications: Other applications as those described above are prohibited.
Unpredictable hazard can come up during unintended use.
The motor (optional) is not intended for permanent up and
down movements with the vertical adjustment. After
continuous operation of .5 minutes it must be cooled down
for at least 8.5 minutes. A continuous operation of the
vertical adjustment for more than .5 minutes can lead to a
defect of the vertical adjustment. During routine operation
the required cooling period is achieved automatically.
Scope of supply: ZAC or CT chair and the SIT stool can be delivered with
various equipment. The actual scope of supply is listed in
detail in the delivery note.
Safety Remarks : a) Please read the instruction manual carefully and make
yourself acquainted with all functions before you start to
operate the device.
b) Don't change anything at the chair/ stool by yourself as
this might impact the safety and leads to the expiry of the
warranty.
c) This chair/ stool is not intended for use in areas with risk
of explosions.
d) Do not operate the chair/ stool if you observe visible
damages. Breakdowns which have impact on the safety
need to be repaired immediately. In this case, please contact
an authorized service technician at Block Optic.
Block Optic Ltd., Semerteichstr. 60, 44 4 Dortmund, Germany, Phone: +49(0) 23 / 0 87 78 5-0, Fax: +49(0) 23 / 7 63 065
