BLADEZ PB-SE802 User manual
Page 1 of 18
Product Handbook
`
FOR THE BLADEZ MOBY 35/40
GAS POWERBOARD
Models: PB-SE802
PB-SE803
PB-SE1802
PB-SE1803
PLEASE BE SAFE WHEN RIDING
ALWAYS WEAR A HELMET AND OBEY ALL LAWS!
Powered Personal Transportation
GAS POWERBOARD
Page 2 of 18
IMPORTANT
THIS IS A 2-CYCLE ENGINE
IT REQUIRES A MIXTURE OF GAS AND 2-STROKE
ENGINE OIL
1. You must always use a gas oil mixture. FAILURE TO DO SO
WILL VOID YOUR WARRANTY!
2. Use 50:1 Gas:Oil Mixture. 2.6 oz of oil for every gallon of High-
Octane Gasoline.
3. Tanaka Perfect Mix, or similar quality 2-Cycle Engine Oil
recommended. Oil can be purchased from your local Bladez
Dealer, Outdoor Power Equipment Dealer, Power Sports Dealer or
on www.ebladez.com.
4. High-Octane Fuel Recommended. (90 octane or higher)
Failure to follow these INSTRUCTIONS will
VOID YOUR WARRANTY!
This PRODUCT IS NOT INTENDED FOR EXTREME or
OFF-ROAD Use! Please take care of your POWERBOARD!
DO NOT JUMP or ABUSE THIS PRODUCT!
DO NOT RIDE IN WET/ICY CONDITIONS!
Failure to follow these instruction or abuse will
VOID YOUR WARRANTY!
If you have any questions, please contact Bladez customer service
(866) 325-2339 or visit us on the web at www.ebladez.com
Page 3 of 18
IMPORTANT
PLEASE READ THIS BEFORE USING THIS PRODUCT
READ THIS FIRST!
WARNING
This product does not conform to Federal Motor Vehicle Standards and is not
intended for operation on public streets, roads or highways. Serious injury can
result from the unsafe operations of this product. Operator can minimize these
risks by using certain safety equipment such as: safety helmet, goggles,
gloves, elbow and kneepads and appropriate footwear.
DO NOT operate this product in traffic, on wet, frozen oily or unpaved
surfaces or under the influence of drugs and/or alcohol. Avoid uneven
surfaces, potholes, surface cracks and obstacles.
DO NOT use a water hose to clean this product. See Product Handbook for
more information.
This product is recommended for riders 16 YEARS OF AGE and older.
SAFETY
This product should not be used by persons without excellent vision,
balance, coordination, reflex, muscle and bone strength and good
decision-making capabilities.
This product should not be used by minors without adult supervision.
This product should not be used by persons unwilling or unable to take
responsibility for their own actions.
•The user of this product assumes ALL risks associated with its use. To
minimize these RISKS, the user must wear safety helmet, goggles, gloves,
elbow and knee pads and appropriate footwear.
Never start the engine inside a closed room or building. Breathing exhaust
fumes can be fatal.
Page 4 of 18
IF YOU HAVE ANY QUESTIONS OR NEED
ASSISTANCE,
PLEASE CALL BLADEZ, TOLL FREE AT:
(866) EBLADEZ
(866) 325-2339
MONDAY thru FRIDAY, 8am to 5pm PST
or visit us on the web at:
www.ebladez.com
GROWING NETWORK OF SERVICING DEALERS
FOR ALL YOUR POWERBOARD NEEDS
DO NOT TAKE YOUR
BLADEZ POWERBOARD BACK
TO THE STORE!
CONTACT US FIRST
Page 5 of 18
Fuel Safety
Mix and pour fuel outdoors away from sparks or flames.
Only use a container approved for fuel.
Do not smoke or allow smoking near the Power Board while working on the
engine, or while the engine is running.
Wipe up and clean all fuel spills before starting the engine.
Move at least 10 feet away from where you fueled before starting engine.
Stop engine before removing the fuel cap.
It is recommended that you empty the fuel tank prior to shipping or storage to
prevent fuel leaks.
Do not store your Power Board near open flames, furnaces, electric motors or
switches.
Maintenance
Maintain your Power Board as recommended in this Product Handbook.
Disconnect the spark plug cap before performing any engine maintenance,
except for carburetor adjustments.
Keep others away while making carburetor adjustments.
Use only quality replacement parts as recommended by the manufacturer.
Transportation and Storage
Carry your Power Board by the handle bar tube with the engine off and the
muffler away from your body.
Allow the engine to cool, empty the fuel tank and fold the Power Board before
carrying or storage.
It is recommended that you empty the fuel tank prior to shipping or storage to
prevent fuel leaks.
Clean the Power Board carefully and store in a cool, dry place.
Product Safety
Keep hands and feet away from moving parts.
Inspect the entire product prior to each use. Replace damaged parts. Check
for fuel leaks and make sure all fasteners are in place and securely fastened.
Replace all parts that are cracked, chipped or damaged before use.
Use only parts and accessories that are recommended by the manufacturer.
If a situation arises that is not covered in the manual,
proceed with caution and use good judgement.
Contact your dealer or Bladez (www.ebladez.com)
if you need further assistance
QUICK REFERENCE
SAFETY GUIDE
Page 6 of 18
TABLE OF CONTENTS
TABLE OF CONTENTS...............................................................................................6
GETTING TO KNOW YOUR BLADEZ POWER BOARD...........................................7
PACKAGE CONTENTS...............................................................................................8
GETTING STARTED ...................................................................................................8
FOLDING AND STORAGE .......................................................................................10
OPERATING PROCEDURES ...................................................................................11
MAINTENANCE.........................................................................................................12
RECOMMENDED TOOLS .................................................................................................... 12
CARBURETOR ADJUSTMENT............................................................................................ 12
BRAKING SYSTEM .............................................................................................................. 13
TIRES AND WHEELS ........................................................................................................... 14
ADJUSTING THE HEAD UNIT ............................................................................................. 14
ADJUSTING THE BELTS ..................................................................................................... 15
MAINTENANCE SCHEDULE....................................................................................16
OTHER QUESTIONS.................................................................................................16
Page 7 of 18
GETTING TO KNOW YOUR BLADEZ POWER BOARD
`
Before operating your BLADEZ Power Board, please get acquainted with all of the features.
Power Board Features
1. Throttle Lever
2. Brake Lever
3. Disc Brake
4. 2-Stroke Engine
5. Folding Handle
6. Kickstand
7. Head Unit
8. Deck
9. Brake Calliper
10. Rear Friction Foot Brake
11. Kill Switch
12. Belt Pulley
13. Belt Cover
14. Handle Bar Tube
Motor Features
1. Recoil Starter
2. Gas Tank
3. Gas Cap
4. Choke Lever
5. Carburetor
6. Carburetor Cover
7. Muffler
8. Muffler Cover
9. Spark Plug
Page 8 of 18
PACKAGE CONTENTS
Your Bladez MOBY comes with the following items in the box. Please locate all of
the following:
1. The Bladez MOBY Power Board
2. Allen Wrench
3. Spark Plug wrench
4. Product Handbook
GETTING STARTED
Please read and understand these instruction and the OPERATING
PROCEDURES section, prior to starting or riding your Power Board
Unfolding
1. Carefully remove the MOBY from the
box.
2. To unfold the MOBY, begin by pressing
down on the FOLDING HANDLE with
one hand (Fig. 1), while gently pulling up
on the handlebars with the other (Fig. 2).
3. Fully extend the handlebars to their
upright position until you feel the
mechanism lock into place (Fig. 3).
4. When you first take the MOBY out of the
box, the BRAKE LEVER and Throttle
LEVER are in the down position for
shipping. Using the provided Allen
Wrench, loosen the tension bolt, and
adjust the levers to a comfortable
position (Fig. 4). * BE CAREFUL NOT
TO PULL ON THE CABLES!
Fueling
This is a two-stroke engine.
Only run the engine using a mixture of
gasoline and 2-cycle engine oil.
PLEASE READ OPERATING
PROCEDURES BEFORE FUELING!
5. Mix fuel (minimum 90 octane) and 2-
cycle engine oil in separate container.
Use Tanaka Perfect Mix or a quality 50:1
2-cycle oil. Make sure the fuel is well
mixed by shaking the container.
6. Make sure that the engine is off!
Page 9 of 18
7. Slowly open the GAS CAP, so that
possible over-pressure disappears.
8. Clean the tank cap area to make sure
that it is free from excess dirt and debris.
* Make sure that no dirt falls into the gas
tank.
9. Pour pre-mixed Gas/Oil mixture into the
GAS TANK. * Do not overfill.
10.After fueling, replace the GAS CAP and
tighten.
Starting
Move at least 10 feet away from where
you filled up the gas.
11.Set the CHOKE LEVER to the CHOKED
(UP) position. (Fig. 5)
12.Pull the RECOIL STARTER briskly,
making sure to hold the handle in your
grasp. (Fig. 6) * Note: Do not allow it to
snap back, let it back slowly. You may
want to give it a little throttle by gently
squeezing the GAS LEVER.
13.It may be necessary to repeat step 12
several times until the motor starts
When starting the MOBY for the first
time, it may be necessary to pull the
starter handle multiple times until it
starts.
*This is because the gas needs to be drawn
into the carburetor.
14.Once the engine has started, quickly
move the CHOKE LEVER into the RUN
(DOWN) position. (Fig. 5)
15.After engine is started, let it warm up for
2-3 minutes before riding.
IF THE MOTOR KEEPS STAHLING AT
IDLE SPEED, IT MAY BE NECSSARY TO
ADJUST THE IDLE SPEED ON THE
CARBURETOR.
Please refer to Carburetor Adjustment in the
Maintenance section on page 12 for
instructions on how to adjust idle speed.
Page 10 of 18
Riding
16.Makes sure that all of the exposed bolts
and screws are tightened.
17.Raise the kickstand to its upright
position.
18.Make sure the engine is running.
19.Put one foot on the deck of the MOBY.
While pushing off with the other foot,
gently depress the THROTTLE LEVER,
on the right side of the handlebars. The
MOBY will begin to move on its own
power.
20.Control your speed by pressing and
releasing the accelerator lever. The
harder you squeeze, the faster you will
go.
Braking
21.To brake, release the THROTTLE
LEVER and depress the BRAKE LEVER
(on the left side of the handlebars). You
can also use the rear foot brake. (Fig. 7)
22.Gradually decrease the engine speed to
idle and press the kill switch button on
the handlebar tube. (Fig. 8) This will turn
the engine OFF.
FOLDING AND STORAGE
When you are done riding the MOBY you can fold it down for compact storage,
carrying and transportation. To fold down the MOBY, use one hand to push down on
the folding handle while gently pushing down on the handlebars. BE CAREFUL NOT
TO HIT YOUR HEAD WITH THE HANDLEBAR. Push down until you feel the
mechanism lock into down position.
* NOTE: If the lever is pulled aggressively, the locking spring may become
stretched and then the steering will not lock into position, it is also advisable
to ensure scooter locks firmly, prior to riding.
You can now carry the MOBY by the handlebar tube.
This manual suits for next models
5
Table of contents
Other BLADEZ Scooter manuals
BLADEZ
BLADEZ PB-SM 817 User manual
BLADEZ
BLADEZ Travel Mate DKS280 User manual
BLADEZ
BLADEZ E-LITE 250 User manual
BLADEZ
BLADEZ MOBY X User manual
BLADEZ
BLADEZ DKS320 EXECUTIVE User manual
BLADEZ
BLADEZ DKS500 AMBASSADOR User manual
BLADEZ
BLADEZ ION 150 Manual
BLADEZ
BLADEZ ION 450 User manual
BLADEZ
BLADEZ PRESIDENT User manual
BLADEZ
BLADEZ MOBY XS PB-SE830PF User manual
BLADEZ
BLADEZ XTR Street PB-SM1806 User manual
BLADEZ
BLADEZ Travel Mate DKS280 User manual
BLADEZ
BLADEZ Sport DKS200 User manual
BLADEZ
BLADEZ PB-SM1816 User manual
BLADEZ
BLADEZ ION 150 User manual
BLADEZ
BLADEZ XTR-HD User manual
BLADEZ
BLADEZ XTR-COMP IIPB-SM 818 User manual
BLADEZ
BLADEZ PB-SM804SA User manual
