SRP-380/382II
Ver. 1.00 BIXOLON
- 4 -
2. Control Commands List in Alphanumeric Order
No.
Command Function
No.
Command Function
1 HT Horizontal tab
26 ESC R Specify an international character set
2 LF Print and line feed
27 ESC S Select standard mode
3 FF Form feed (in page mode)
28 ESC T Select print direction in page mode
4 CR Print and carriage return
29 ESC V Turn 90° clockwise rotation mode on/off
5 CAN Cancel the print data in page mode
30 ESC W Set print area in page mode
6 DLE EOT Transmit real-time status
31 ESC \ Set relative print position
7 DLE DC4 Generate pulse at real-time
32 ESC a Set position alignment
8 ESC SP Set the character right space
33 ESC d Print and feed n lines
9 ESC ! Set print mode
34 ESC i Partial cut
10 ESC $ Set absolute print position
35 ESC m Partial cut
11 ESC % Select/cancel user-defined character set
36 ESC p Generate pulse
12 ESC & Define user-defined character set
37 ESC t Select character code table
13 ESC * Specify bit image mode
38 ESC v Transmit paper sensor status
14 ESC - Turn underline mode on/off
39 ESC { Turn upside-down print mode on/off
15 ESC 2 Select default line spacing
40 FS p Print NV bit image
16 ESC 3 Set line spacing
41 FS q Define NV bit image
17 ESC = Select peripheral device
42 GS ! Select character size
18 ESC ? Cancel user-defined characters
43 GS $ Set absolute vertical print position in
page mode
20 ESC D Set horizontal tab positions
45
GS 8 L Select graphics data
21 ESC E Turn emphasized mode on/off
46 GS ( k Specify and print the symbol
22 ESC G Turn double-strike mode on/off
47 GS * Define downloaded bit image
23 ESC J Print and feed paper
48 GS / Print downloaded bit image
24 ESC L Select page mode
49 GS : Start/end macro definition
25 ESC M Select character font
50 GS B Turn white/black reverse print mode on/off
