Bishamon SCL3000A User manual

Aug. 2021

Sugiyasu Corporation

Dear Users,

Thank you for purchasing our Bishamon Tortoise G Lift. Before using the lift, read through

and be familiar with this manual. Fully understand the precautions, directions, and other

information contained in this manual to ensure correct use. Failure to do so may result

not only in insufficient performance of the lift but also in falling of the vehicle, serious

injury and death, and damage to properties.

Keep this manual in a safe place for future reference. In case of loss, immediately request

a new copy.

If the product is supplied with a wrong manual, contact your lift supplier for a correct copy.

Perform periodic maintenance inspection of the lift to ensure safe work

with the lift and keep the lift fully functional.

The contents of the manual may differ when the purchased lift is modified. For any

question about the product or this manual, feel free to contact your lift supplier.

Keep this manual in a safe place for future reference. In case of loss, contact your

lift supplier and request for a new copy immediately.

Thank you for purchasing our Bishamon Tortoise G Lift . Before using the lift, read

through and be familiar with this manual. Fully understand the precautions, directions,

and other information contained in this manual to ensure correct use. Failure to do so

may result not only in insufficient performance of the lift but also in falling of the

vehicle, serious injury and death, and damage to properties.

In this manual, 「Danger」,「Warning」, 「Caution」are defined and

specified as below. Notice of Warnings are very important for safe operations. As

these are very important to protect operators from accidents resulting in

personal injury and death, and damage to property, so make sure to read

thoroughly and understand fully before operation.

Danger

Incorrect operation may imminently result in serious

injury or death of the operator.

Warning Incorrect operation may result in serious injury or

death of the operator.

Caution Incorrect operation may result in injury and damage

to the property. The occurence of the danger is lower

than "Warning" articles.

Explanation of Terms and Symbols

3) ～ 5)

8) ～ 9)

10)

11)

12)

13)

14) ～ 17)

14)

14) ～ 15)

16)

17)

18) ～ 19)

19)

20)

21) ～ 22)

23) ～ 24)

23)

24)

25)

26)

This product is a lift to be used for oil and parts replacement, general maintenance,

motor vehicles inspection and maintenance etc. of mini-to ordinary sized passenger cars,

small sized trucks, and the like.

As there are very important to protect operators from accidents which may result in

injury and death,and damage to cars and properties, make sure to understand fully before

operating the lift.

1. Read and be familiar with the operation manual before operating.

2. Only trained operators are allowed to use the lift.

3. Make sure to perform daily and periodic inspections in accordance with the

instructions of Operation Manual.

4. If any abnormal conditions, such as noise, occur during operation, prohibit the

use of the lift and contact lift supplier for an inspection.

5. This lift is designed for motor vehicle servicing. DO NOT use for any other

purposes.

6. Do not remove any labels and do not modify the lift anyway.

The meaning of the mark (symbol) used behind pictures are as below.

When lift is operating,

get under the vehicle.

allow others to get under vehicle

Or it may result in death or serious injury.

If the

attempt to support vehicle.

Or it may result in death or serious injury.

Caution for Safety

The specified act

that should not be

conducted.

The specified act

that should be

conducted.

Warnings and

cautions that are

possible to occur due

to incorrect operation.

Read the Operation Manual DO NOT lower the lift

thoroughly before using while any stand, jack or and parallel to the lift.

the lift. support is in position

Important Warnings are under vehicle. evenly. And set the CG of

described. DO NOT use "Down" motion vehicle within the range

*Incorrect operation may of lift to push parts

result in an accident. into position. arrow on the lift.

Set the supporters on a DO NOT lift vehicles by DO NOT modify any Safety

flat spot with sufficient one end only. Or it may Device of the lift under

result in fall of the any circumstances.

Side Sill Block supporters vehicle and damage lift.

to avoid any accident.

KEEP FEET CLEAR

When lowering lift, make the raised vehicle. Or it evenly. DO NOT lift up

sure to keep feet clear may result in fall of the offset vehicle. Or it may

of hoist and vehicle. vehicle. result in fall of vehicle

DO NOT use lift unless ELECTRICAL HAZARD!

you have been trained in when raising and lowering DO NOT open control box

it's operation. lift, MAKE SURE to keep or remove cover plates

*Incorrect operation may hands and feet clear of without isolating

result in an accident. any scissor mechanism. electrical supply.

KEEP HANDS and FEET CLEAR

specified with Yellow Color

DO NOT swing, shake or push

strength. Use only genuine

Vehicle MUST BE positioned

Drive in vehicle straight

1. This lift is designed for motor vehicle servicing. DO NOT Use for other purpose.

2. This lift capacity is 3,000 kgs. DO NOT lift any vehicle exceeding the maximum lift capacity.

3. The unbalance load between right and left side Supporter should be less than 300 kgs.

4. Extreme unbalanced load on the lift could result in large inclination of the vehicle.

lifting points on the vehicle. Try to have as wider distance as possible between lifting points.

Refer to the maintenance manual of the vehicle for information of correct lifting points.

6. Make sure to put Slide Stopper Pin when using Slide Supporter.

7. DO NOT drive in or drive out when Slide Supporter is extended.

9. If any of safety device does not work properly, DO NOT use lift.

1. When operating the lift, pay constant attention to the area around the vehicle and the lift.

NEVER look aside during operation.

2. If there are other lifts installed in the same site, Pay attention not to operate the control

switch of other lifts.

3. DO NOT lift vehicles with passengers, baggage or cargo etc.inside (on board).

4. Make sure there is no oil or dirt on supporter when lifting vehicle.

5. Stop lifting after supporter have made firm contact with vehicle, and check locations of

supporter for correct lifting points before reraising the vehicle.

7. The lift height of both sides may become unbalanced during lifting and lowering operations.

2～3 seconds to synchronize. If lift becomes unbalanced extremely during lowering operations,

then stop using the lift and contact your lift supplier.

8. If the lift would not lower, raise the lift once and then relower.

9. If lower the lift with Sliding Supporter being used (extended), retract Sliding Supporter back

as soon as vehicle tyre hit the floor, and then lower the lift to lowest position. Or Supporters

and floor could be damaged.

10. Before lowering the lift, ensure that no person or objects is around vehicle or lift.

11. DO NOT operate the lift with anything such as tools or parts left in the pit or under the lift.

Failure to comply may result in failure of the lift or falling of the vehicle.

12. Drive the vehicle in and out only after the supporters have been lowered completely.

Failure to do so can cause damage of the vehicle or the lift.

1. Make sure Safety Hooks are engaged before getting under vehicle.

2. Keep anyone but the operator out from around the lift.

4. DO NOT leave a vehicle on the lift for long time. If the lift is left over at the height

where there is no Lowering Stop Rack, lift could lower and may damage the vehicle.

5. When not in use, the lift must be lowered to the lowest position.

1. DO NOT modify the lift without permission from the manufacturer. Failure to comply may result

in insufficient performance and lead to serious accident.

2. When an abnormality is detected during use or inspection, stop the use of the lift immediately

and repair. DO NOT use lift until the repair is completed.

3. Use only genuine Side Sill Block Supporter.

4. This lift is not weatherproof and is not to be used outdoors or for vehicle washing.

5. Do not supply air with air pressure exceeding 1.0 MPa to the air filter regulator. Or it may

damage the air filter regulator.

6. The air filter regulator must be set to 0.5 Mpa. If it is set to over 0.5 Mpa, it may damage

Selex Valve.

『 Lifting Point 』… Designated spot of the vehicle to be lifted. Refer to the maintenance manual of

the vehicle.

『 Side Sill 』… Body welding spot under rocker panel. Lifting point is located for passenger vehicle.

8. Drive in and out vehicle slowly, and DO NOT start and stop suddenly. Or it could damage Slide Supporter.

6. DO NOT put and use anything but genuine Side Sill Block between Supporter and vehicle lifting point.

5. Set the supporters securely at lifting points, and do not raise a vehicle when there are not clear

In such case, without vehicle on the lift, lift up to max height and keep pushing "UP" button for

CG Label

Capacity Label

Serial Plate

Caution Label E

showing how to do Pre Operation

Check of Filter Regulator.

Caution Label

Labels feature descriptions on important matters for preventing accidents and property damages,

as well as capacity of the lift. Purchase and apply these lables promptly when they become worn,

damaged or peeled off while the lift is used.

Slide Supporter

※ Drive-In Ramp

Double Scissor Link

Lowering Stop

Rack & Hook

Lift Cylinder

Serial Plate

Hyd. Unit

Push

Button

Switch

※ Drive On Ramp are not

supplied for Model SCL3000AP

Air Filter Regulator reduce the air pressure of the

air supplied to the Air Filter Regulator to appropriate

pressure levels, and drain water in the air. Air pressure

gauge shows the air pressure after depressurization.

① Verify that the air pressure supplied to the

Air Filter Regulator is more than 0.5 Mpa

② Loosen the screw on top of the Air Filter

Regulator.

③ Look at and check the air pressure gauge while

turning the pressure adjustment knob to set the

air pressure to 0.5 Mpa.

　　④ Tighten the screw on the top of Air Filter

Regulator.

① Push up the drain valve at the bottom.

Water sprays out with air.

Depressurize Pressurize

Pressure

adjustment knob

Air pressure

gauge

Screw

*The appropriate value of the pressure of air (primary side pressure) supplied to the filter

regulator is between 0.5 and 1.0 MPa. The filter regulator may be damaged if the pressure

is greater than 1.0 MPa.

* Always make sure that the air pressure gauge is pointing 0.5 MPa before operating lift.

The lift may malfunction if the pressure is under 0.5 MPa. Furthermore, the Selex valve

may be damaged if the pressure is over 0.5 MPa. Always set the pressure to 0.5 MPa.

Caution

Drain valve

Water must be drained from the air filter regulator every day.

Accumulation of water can cause malfunction.

Air Filter

Regulator

Push

Button

Switch

Caution

Push Button Switch is the device to raise and lower the lift.

・When pushing "UP" button, lift rises, and stops when releasing.

・When pushing "DOWN" button, lift lowers and stops when

releasing button.

・"UP" button and "DOWN" button can not be pushed together at

the same time.

Supporter length can be adjustable depending on the vehicle lifting point.

Side Sill Block is used to protect vehicle side sill when lifting vehicle

by Supporter.

There are 3 kinds height Side Sill Blocks as below.

・Height 30mm - Supplied as Standard for Model SCL3000A

・Height 70mm - Supplied as Standard for Model SCL3000AP

※ Height 115mm - Available only as Option

If operating Push Button Switch carelessly before confirming the safety of lift and vehicle

surroundings, it may result in serious accidents.

Warning

This manual suits for next models

Table of contents

Other Bishamon Lifting System manuals

Popular Lifting System manuals by other brands

morse

morse 82H-124 Operator's manual

Braun

Braun NL955 Series Operator's manual

haacon

haacon 1889.10 quick start guide

Protekt

Protekt AT 252 instruction manual

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 operating manual

Nova Technology International, LLC

Nova Technology International, LLC NAS Series quick start guide

Genie

Genie Z-60/34 Operator's manual

Screen Technics

Screen Technics INTERFIT Vertical Up Lift instructions

Mortuary Lift

Mortuary Lift ULTIMATE 1000 instructions

Custom Equipment

Custom Equipment Hy-Brid 3 Series MAINTENANCE & TROUBLESHOOTING MANUAL

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Maintenance and troubleshooting manual

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 MAINTENANCE & TROUBLESHOOTING MANUAL

BERG

BERG BeNomic EasyLeaf Technical manual

Powermate

Powermate LiftGate LG-3 Installation & operation manual

Snorkel

Snorkel TM12 Series Operator's manual

Terberg

Terberg OMNIDEKA Translation of the original instructions

Harmar Mobility

Harmar Mobility AL625 Installation & owner's manual

Rotary

Rotary SPO16 installation instructions