BION TECHNOLOGIES tellus m User manual
tellus m installation box
USER MANUAL
BEDIENUNGSANLEITUNG
www.biontechnologies.com
tellus m installation box
USER MANUAL
Safety Instructions
Devices must be installed by qualified personnel in compliance
with all pertaining regulations.
Provide a proper foundation to handle the maximum pessure load
Avoid dammed-up water by building an appropriate drainage
The Housing must not be in contact with corrosive substances
If you set the Housing in concrete, prevent it from compression by using proper spacers
The provided screws are to replace the centered ones in the luminaire to fix the luminare inside the housing
Insert the luminaire into the housing an tighten the screws hand-tight
2 | www.biontechnologies.com
Scope of delivery
Check completeness of supplied device immediately after receipt.
In delivery included:
1x User Manual
1x Bion Technologies tellus m installation box
2x Screws to mount Luminaire
If you detect any transportation damage or differencies between specified packing contents and your unpacked delivery, please contact
your dealer immediately.
www.biontechnologies.com | 3
Technical Data
Dimensions 120 mm x 146 mm [W x H]
4.73 in x 5.75 in [W x H]
Standard Unit Lengths 114,5 mm (tellus point xs), 224,5 mm (tellus point s), 272,5 mm (tellus point m), 349,5 mm,
654,5 mm, 959,5 mm, 1264,5 mm
4.49 in (tellus point xs), 8.82 in (tellus point s), 10.71 in (tellus point m), 13.75 in, 25.75 in, 37.76
in, 49.77 in
Housing Extruded aluminium profile
Housing Color(s)
Aluminium
anodized
(Standard)
Weight 345 mm (13.59 in): 2.1 kg (4.63 lbs)
650 mm (25.60 in): 3.8 kg (8.38 lbs)
955 mm (37.60 in): 5.5 kg (12.13 lbs)
1260 mm (49.61 in): 7.2 kg (15.87 lbs)
Load 500 kg (1102 lbs)
Installation Depth 146 mm (5.75 ")
Certification
Engineering Drawing
4 | www.biontechnologies.com
Mounting
1. Mounting Installation Box
Conduits may not extend more than 10 mm into the installation housing.
www.biontechnologies.com | 5
2. Drainage system
IMPORTANT:
Provide a proper foundation to handle the maximum pessure load
Avoid dammed-up water by building an appropriate drainage
Avoid any contact of the housing with corrosive substances
If the housing is set in concrete, prevent it from compression by using proper spacers
The provided screws are to replace the centered ones in the luminaire to fix the luminare inside the housing
Insert the luminaire into the housing an tighten the screws hand-tight
Conduits may not extend more than 10 mm into the installation housing.
6 | www.biontechnologies.com
3. Mounting of the fixture in the installation housing
www.biontechnologies.com | 7
Maintenance
Clean device from dirt and residue regularly. Use solvent-free cleaning agents only and do not employ aggressive chemicals or high
pressure cleaner. Operate device only after complete drying.
Conformity
Manufacturer
Bion Technologies GmbH
Lindberghstrasse 15
86343 Koenigsbrunn
Tel: +49 (0)8231/95787-0
Fax: +49 (0)8231/95787-29
www.biontechnologies.com
YouTube: http://www.youtube.com/BIONTECHNOLOGIES
All rights reserved / Subject to change / Specifications may change without notice
8 | www.biontechnologies.com
tellus m installation box
BEDIENUNGSANLEITUNG
Sicherheitshinweise
Anschluss und Bedienung dieses Geräts sollte ausschließlich
von qualifiziertem Fachpersonal in Übereinstimmung mit allen
geltenden Vorschriften erfolgen.
Ein geeignetes Fundament ist nötig um die maximale Druckbelastung aufnehmen zu können
Eine geeignete Wasserableitung ist herzustellen um Staunässe zu vermeiden
Das Gehäuse darf nicht mit aggressiven Medien in Kontakt kommen
Sollte das Gehäuse einbetoniert werden muss es mittig mit geeigneten Mitteln gegen zusammendrücken
geschützt werden
Die beiliegenden Schrauben sind für die Montage der Leuchte in dem Installationsgehäuse vorgesehen
Dazu werden die beiden mittigen Schrauben in der Leuchte entfernt und gegen die beiligenden getauscht
Nun wird die Leuchte in das Gehäuse eingesetzt und mit den Schrauben handfest gesichert
www.biontechnologies.com | 9
Lieferumfang
Packen Sie alle Teile aus.
Prüfen Sie den Verpackungsinhalt auf sichtbare Transportschäden.
Prüfen Sie, ob der Verpackungsinhalt vollständig ist.
Im Lieferumfang enthalten:
1x Bedienungsanleitung
1x Bion Technologies tellus m Installationsgehäuse
2x Schrauben zur Leuchtenmontage
Wenn Sie Transportschäden oder Unstimmigkeiten zwischen dem hier angegebenen Lieferumfang und Verpackungsinhalt feststellen,
informieren Sie unverzüglich Ihre Verkaufstelle.
10 | www.biontechnologies.com
Table of contents
Languages:
Other BION TECHNOLOGIES Lighting Equipment manuals
BION TECHNOLOGIES
BION TECHNOLOGIES linea xs inground eco User manual
BION TECHNOLOGIES
BION TECHNOLOGIES tantulus hp indoor tunableWhite User manual
BION TECHNOLOGIES
BION TECHNOLOGIES linea xs inground Series User manual
BION TECHNOLOGIES
BION TECHNOLOGIES firmus l RGBWquad User manual
BION TECHNOLOGIES
BION TECHNOLOGIES tantulus 24V hp100 User manual
BION TECHNOLOGIES
BION TECHNOLOGIES linea xs inground hp User manual
BION TECHNOLOGIES
BION TECHNOLOGIES linea m hp indoor pureColor User manual
BION TECHNOLOGIES
BION TECHNOLOGIES linea xs eco pureWhite User manual
BION TECHNOLOGIES
BION TECHNOLOGIES PS | tellus po rd xs User manual
Popular Lighting Equipment manuals by other brands
Qazqa
Qazqa Suplux SL 3 Black 103062 instruction manual
Commercial Electric
Commercial Electric 54568141 Use and care guide
CREE LIGHTING
CREE LIGHTING 304 Series installation instructions
Goobay
Goobay 49867 user manual
ECOMAN ITALIA
ECOMAN ITALIA LED T8 instruction manual
Alkalite
Alkalite Krypton KT-81 user manual
